Age | Commit message (Collapse) | Author |
|
AFAICT CURLOPT_RANGE does not support ranged HTTP PUT uploads so I've
cautioned against using it for that purpose and included a workaround.
Bug: https://curl.haxx.se/mail/lib-2019-04/0075.html
Reported-by: Christopher Head
Closes https://github.com/curl/curl/issues/3814
|
|
Closes https://github.com/curl/curl/pull/4118
|
|
Since 7.54 --tlsv1. options use the specified version or later, however
older versions of curl documented it as using just the specified version
which may or may not have happened depending on the TLS library.
Document this discrepancy to allay confusion for users familiar with the
old documentation that expect just the specified version.
Fixes https://github.com/curl/curl/issues/4097
Closes https://github.com/curl/curl/pull/4119
|
|
- Allow FTPS on redirect.
- Update default allowed redirect protocols in documentation.
Follow-up to 6080ea0.
Ref: https://github.com/curl/curl/pull/4094
Closes https://github.com/curl/curl/pull/4115
|
|
... and adjust those that cause errors
Closes #4116
|
|
follow-up to 6080ea098
|
|
Fix an issue where example builds a curl_slist, but fails to actually
use it, or free it.
Closes https://github.com/curl/curl/pull/4090
|
|
OpenSSL changed their manual locations and does not redirect to the new
locations.
Bug: https://curl.haxx.se/mail/lib-2019-06/0056.html
Reported-by: Daniel Stenberg
|
|
The backslash in the character Line Feed must be escaped.
The current man-page outputs the code as following:
fprintf(stderr, "curl_multi failed, code %d.0, mc);
The commit fixes it as follow:
fprintf(stderr, "curl_multi failed, code %d\n", mc);
Closes #4079
|
|
Commit 25fd1057c9c86e3 made HTTP2 the default, and further down in the
man page that new default is mentioned, but the section at the top
contradicted it until now.
Also remove claim that setting the HTTP version is not sensible.
Closes #4075
|
|
|
|
Additionally, add an alias in curl.h for slist-using options so that
we can grep/parse those out at will.
Closes #4042
|
|
Moved away the callback explanation from curl_multi_socket_action.3 and
expanded it somewhat.
Closes #4006
|
|
Clarify the functionality when built to use Schannel and Secure
Transport and stop calling it the "recommended" or "preferred" way and
instead rather call it the default.
Removed the reference to the ssl comparison table as it isn't necessary.
Reported-by: Richard Alcock
Bug: https://curl.haxx.se/mail/lib-2019-06/0019.html
Closes #4005
|
|
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes #3903
|
|
Fixed-by: MrSorcus on github
Closes #4000
|
|
Reported-by: Carlos ORyan
|
|
Reported-by: Jay Satiro
Co-authored-by: Jay Satiro
Fixes #3938
Closes #3946
|
|
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
|
|
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed #3653
Closes #3790
|
|
Also removed mentions from most docs.
Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html
Closes #3888
|
|
Reported-by: Roy Bellingan
Bug: #3885
|
|
Clues-provided-by: Jay Satiro
Clues-provided-by: Jeroen Ooms
Fixes #3711
Closes #3874
|
|
The zoneid can be used with IPv6 numerical addresses.
Updated test 1560 to verify.
Closes #3834
|
|
Reported-by: Ricardo Gomes
Bug: #3537
Closes #3836
|
|
The time field in the curl_fileinfo struct will always be zero. No code
was ever implemented to actually convert the date string to a time_t.
Fixes #3829
Closes #3835
|
|
... and disconnect too old ones instead of trying to reuse.
Default max age is set to 118 seconds.
Ref: #3722
Closes #3782
|
|
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes #3655
Closes #3765
Fixes #3713
|
|
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753
Closes #3762
|
|
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes #3654
|
|
|
|
As previously planned and documented in DEPRECATE.md, all pipelining
code is removed.
Closes #3651
|
|
Closes #3724
Reviewed-by: Jakub Zakrzewski
Reviewed-by: Daniel Gustafsson
|
|
|
|
|
|
|
|
Reported-by: Sara Golemon
Fixes #3592
Closes #3634
|
|
Everyone calls it Secure Transport, now we do too.
Reviewed-by: Nick Zitzmann
Closes #3619
|
|
From within the timer callbacks. Recursive is problematic for several
reasons. They should still work, but this way the examples and the
documentation becomes simpler. I don't think we need to encourage
recursive calls.
Discussed in #3537
Closes #3601
|
|
and make CONNECT_ONLY conections never reuse any existing ones either.
Reported-by: Pavel Löbl
Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html
Closes #3586
|
|
[ci skip]
|
|
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes #3504
|
|
Use an ephemeral port number here; previously the example had 8080
which could be confusing as the common web server port number might
be misinterpreted as suggesting this option affects the remote port.
URL: https://curl.haxx.se/mail/lib-2019-01/0084.html
Closes #3513
|
|
A backslash should be escaped in Roff / Troff.
|
|
|
|
Closes #3417
|
|
When a non-empty list is appended to, and used as the returnvalue,
the list pointer can leak in case of an allocation failure in the
curl_slist_append() call. This is correctly handled in curl code
usage but we weren't explicitly pointing it out in the API call
documentation. Fix by extending the RETURNVALUE manpage section
and example code.
Closes #3424
Reported-by: dnivras on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes #2873
Closes #3383
|
|
|
|
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes #3350
|