Age | Commit message (Collapse) | Author |
|
|
|
If a Retry-After: header was used in the response, that value overrides
other retry timing options.
Fixes #3794
Closes #4195
|
|
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
|
|
|
|
It can't be set for CURLOPT_HTTP_VERSION, but it can be extracted with
CURLINFO_HTTP_VERSION.
|
|
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
|
|
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
|
|
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes #3653
Closes #3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
|
|
|
|
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes #4163
|
|
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes #4191
|
|
|
|
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes #4138
|
|
- Trade in __attribute__((unused)) for the classic (void)x to silence
unused symbols.
Because the classic way is not gcc specific. Also because the prior
method mapped to symbol _Unused, which starts with _ and a capital
letter which is reserved.
Assisted-by: The Infinnovation team
Bug: https://github.com/curl/curl/issues/4120#issuecomment-512542108
Closes https://github.com/curl/curl/pull/4153
|
|
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes #3500
|
|
|
|
|
|
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes #3804
|
|
... will make it render as a nicer web page.
Closes #4131
|
|
Introducing CURLVERSION_SIXTH with nghttp2 info.
Closes #4121
|
|
|
|
|
|
AFAICT CURLOPT_RANGE does not support ranged HTTP PUT uploads so I've
cautioned against using it for that purpose and included a workaround.
Bug: https://curl.haxx.se/mail/lib-2019-04/0075.html
Reported-by: Christopher Head
Closes https://github.com/curl/curl/issues/3814
|
|
Closes https://github.com/curl/curl/pull/4118
|
|
If the SSL backend is Schannel and the user specifies an Schannel CALG_
that is not supported by the protocol or the server then curl returns
CURLE_SSL_CONNECT_ERROR (35) SEC_E_ALGORITHM_MISMATCH.
Fixes https://github.com/curl/curl/issues/3389
Closes https://github.com/curl/curl/pull/4106
|
|
Since 7.54 --tlsv1. options use the specified version or later, however
older versions of curl documented it as using just the specified version
which may or may not have happened depending on the TLS library.
Document this discrepancy to allay confusion for users familiar with the
old documentation that expect just the specified version.
Fixes https://github.com/curl/curl/issues/4097
Closes https://github.com/curl/curl/pull/4119
|
|
- Allow FTPS on redirect.
- Update default allowed redirect protocols in documentation.
Follow-up to 6080ea0.
Ref: https://github.com/curl/curl/pull/4094
Closes https://github.com/curl/curl/pull/4115
|
|
... and adjust those that cause errors
Closes #4116
|
|
- Escape apostrophes at line start.
Some lines begin with a "'" (apostrophe, single quote), which is then
interpreted as a control character in *roff.
Such lines are interpreted as being a call to a macro, and if
undefined, the lines are removed from the output.
Bug: https://bugs.debian.org/926352
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Submitted-by: Alessandro Ghedini
Closes https://github.com/curl/curl/pull/4111
|
|
follow-up to 6080ea098
|
|
Correctly set the July 17 version to 7.65.2, and update spelling to
be consistent. Also fix a typo.
Closes https://github.com/curl/curl/pull/4107
|
|
Fix an issue where example builds a curl_slist, but fails to actually
use it, or free it.
Closes https://github.com/curl/curl/pull/4090
|
|
|
|
OpenSSL changed their manual locations and does not redirect to the new
locations.
Bug: https://curl.haxx.se/mail/lib-2019-06/0056.html
Reported-by: Daniel Stenberg
|
|
The backslash in the character Line Feed must be escaped.
The current man-page outputs the code as following:
fprintf(stderr, "curl_multi failed, code %d.0, mc);
The commit fixes it as follow:
fprintf(stderr, "curl_multi failed, code %d\n", mc);
Closes #4079
|
|
Commit 25fd1057c9c86e3 made HTTP2 the default, and further down in the
man page that new default is mentioned, but the section at the top
contradicted it until now.
Also remove claim that setting the HTTP version is not sensible.
Closes #4075
|
|
Closes #3267
|
|
Closes #3284
|
|
|
|
Additionally, add an alias in curl.h for slist-using options so that
we can grep/parse those out at will.
Closes #4042
|
|
Reported-by: Ben Voris
Fixes #4017
Closes #4019
|
|
Moved away the callback explanation from curl_multi_socket_action.3 and
expanded it somewhat.
Closes #4006
|
|
Clarify the functionality when built to use Schannel and Secure
Transport and stop calling it the "recommended" or "preferred" way and
instead rather call it the default.
Removed the reference to the ssl comparison table as it isn't necessary.
Reported-by: Richard Alcock
Bug: https://curl.haxx.se/mail/lib-2019-06/0019.html
Closes #4005
|
|
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes #3903
|
|
Fixed-by: MrSorcus on github
Closes #4000
|
|
Compilers and static analyzers warn about using C-style casts here.
Closes https://github.com/curl/curl/pull/3975
|
|
As want is size_t, (file->buffer_pos - want) is unsigned, so checking
if it's less than zero makes no sense.
Check if file->buffer_pos is less than want instead to avoid the
unsigned integer wraparound.
Closes https://github.com/curl/curl/pull/3975
|
|
Reduce variable scopes and remove redundant variable stores.
Closes https://github.com/curl/curl/pull/3975
|
|
|
|
Reported-by: Carlos ORyan
|