aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-09-12curlver: bump to 7.66.1Daniel Stenberg
2019-08-23defines: avoid underscore-prefixed definesDaniel Stenberg
Double-underscored or underscore plus uppercase letter at least. ... as they're claimed to be reserved. Reported-by: patnyb on github Fixes #4254 Closes #4255
2019-08-14vauth: Use CURLE_AUTH_ERROR for auth function errorsJay Satiro
- Add new error code CURLE_AUTH_ERROR. Prior to this change auth function errors were signaled by CURLE_OUT_OF_MEMORY and CURLE_RECV_ERROR, and neither one was technically correct. Ref: https://github.com/curl/curl/pull/3848 Co-authored-by: Dominik Hölzl Closes https://github.com/curl/curl/pull/3864
2019-08-13curl_version_info: make the quic_version a constDaniel Stenberg
Follow-up from 1a2df1518ad8653f Closes #4222
2019-08-12curl_version_info: offer quic (and h3) library infoDaniel Stenberg
Closes #4216
2019-08-09CURLOPT_H3: removedDaniel Stenberg
There's no use for this anymore and it was never in a release. Closes #4206
2019-08-08alt-svc: send Alt-Used: in redirected requestsDaniel Stenberg
RFC 7838 section 5: When using an alternative service, clients SHOULD include an Alt-Used header field in all requests. Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus this is deemed ok). You can disable sending this header just like you disable any other HTTP header in libcurl. Closes #4199
2019-08-08CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directlyDaniel Stenberg
Even though it cannot fall-back to a lower HTTP version automatically. The safer way to upgrade remains via CURLOPT_ALTSVC. CURLOPT_H3 no longer has any bits that do anything and might be removed before we remove the experimental label. Updated the curl tool accordingly to use "--http3". Closes #4197
2019-08-07CURLINFO_RETRY_AFTER: parse the Retry-After header valueDaniel Stenberg
This is only the libcurl part that provides the information. There's no user of the parsed value. This change includes three new tests for the parser. Ref: #3794
2019-08-07curl.h: add CURL_HTTP_VERSION_3 to the version enumDaniel Stenberg
It can't be set for CURLOPT_HTTP_VERSION, but it can be extracted with CURLINFO_HTTP_VERSION.
2019-08-06sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZIDSteve Holme
Added the ability for the calling program to specify the authorisation identity (authzid), the identity to act as, in addition to the authentication identity (authcid) and password when using SASL PLAIN authentication. Fixes #3653 Closes #3790 NOTE: This commit was cherry-picked and is part of a series of commits that added the authzid feature for upcoming 7.66.0. The series was temporarily reverted in db8ec1f so that it would not ship in a 7.65.x patch release. Closes https://github.com/curl/curl/pull/4186
2019-08-06curl_multi_poll: a sister to curl_multi_wait() that waits moreDaniel Stenberg
Repeatedly we see problems where using curl_multi_wait() is difficult or just awkward because if it has no file descriptor to wait for internally, it returns immediately and leaves it to the caller to wait for a small amount of time in order to avoid occasional busy-looping. This is often missed or misunderstood, leading to underperforming applications. This change introduces curl_multi_poll() as a replacement drop-in function that accepts the exact same set of arguments. This function works identically to curl_multi_wait() - EXCEPT - for the case when there's nothing to wait for internally, as then this function will by itself wait for a "suitable" short time before it returns. This effectiely avoids all risks of busy-looping and should also make it less likely that apps "over-wait". This also changes the curl tool to use this funtion internally when doing parallel transfers and changes curl_easy_perform() to use it internally. Closes #4163
2019-07-30curl.h: fix outdated commentJustin
Closes #4167
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-20curl_version_info: provide nghttp2 detailsDaniel Stenberg
Introducing CURLVERSION_SIXTH with nghttp2 info. Closes #4121
2019-07-19bump: start working on 7.66.0Daniel Stenberg
2019-07-19version: bump to 7.65.3Daniel Stenberg
2019-07-17libcurl: Restrict redirect schemes (follow-up)Jay Satiro
- Allow FTPS on redirect. - Update default allowed redirect protocols in documentation. Follow-up to 6080ea0. Ref: https://github.com/curl/curl/pull/4094 Closes https://github.com/curl/curl/pull/4115
2019-06-22typecheck: add 3 missing strings and a callback data pointerDaniel Stenberg
Closes #4050
2019-06-20typecheck: CURLOPT_CONNECT_TO takes an slist tooDaniel Stenberg
Additionally, add an alias in curl.h for slist-using options so that we can grep/parse those out at will. Closes #4042
2019-06-08bump: start working on 7.65.2Daniel Stenberg
2019-06-04ssl: Update outdated "openssl-only" comments for supported backendsFrank Gevaerts
These are for features that used to be openssl-only but were expanded over time to support other SSL backends. Closes #3985
2019-05-25Revert all SASL authzid (new feature) commitsJay Satiro
- Revert all commits related to the SASL authzid feature since the next release will be a patch release, 7.65.1. Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined for the next release, assuming it would be a feature release 7.66.0. However instead the next release will be a patch release, 7.65.1 and will not contain any new features. After the patch release after the reverted commits can be restored by using cherry-pick: git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690 Details for all reverted commits: Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()." This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a. Revert "tests: Fix the line endings for the SASL alt-auth tests" This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221. Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples" This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75. Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool" This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817. Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID" This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
2019-05-22sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZIDSteve Holme
Added the ability for the calling program to specify the authorisation identity (authzid), the identity to act as, in addition to the authentication identity (authcid) and password when using SASL PLAIN authentication. Fixed #3653 Closes #3790
2019-05-22bump: start on the next releaseDaniel Stenberg
2019-05-16cleanup: remove FIXME and TODO commentsDaniel Stenberg
They serve very little purpose and mostly just add noise. Most of them have been around for a very long time. I read them all before removing or rephrasing them. Ref: #3876 Closes #3883
2019-05-05urlapi: add CURLUPART_ZONEID to set and getDaniel Stenberg
The zoneid can be used with IPv6 numerical addresses. Updated test 1560 to verify. Closes #3834
2019-05-03CURLOPT_CHUNK_BGN_FUNCTION.3: document the struct and time valueDaniel Stenberg
The time field in the curl_fileinfo struct will always be zero. No code was ever implemented to actually convert the date string to a time_t. Fixes #3829 Closes #3835
2019-04-28curlver.h: use parenthesis in CURL_VERSION_BITS macroTseng Jun
Closes #3809
2019-04-21CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuseDaniel Stenberg
... and disconnect too old ones instead of trying to reuse. Default max age is set to 118 seconds. Ref: #3722 Closes #3782
2019-04-11build: fix Codacy/CppCheck warningsMarcel Raad
- remove unused variables - declare conditionally used variables conditionally - suppress unused variable warnings in the CMake tests - remove dead variable stores - consistently use WIN32 macro to detect Windows Closes https://github.com/curl/curl/pull/3739
2019-04-08RELEASE-NOTES: syncedDaniel Stenberg
bumped to 7.65.0 for next release
2019-03-14makefile: make checksrc and hugefile commands "silent"Daniel Stenberg
... to match the style already used for compiling, linking etc. Acknowledges 'make V=1' to enable verbose. Closes #3681
2019-03-03alt-svc: the libcurl bitsDaniel Stenberg
2019-02-28Secure Transport: no more "darwinssl"Daniel Stenberg
Everyone calls it Secure Transport, now we do too. Reviewed-by: Nick Zitzmann Closes #3619
2019-02-27curl.h: use __has_declspec_attribute for shared buildsDon J Olmstead
Closes #3616
2019-02-11curlver: bump to 7.64.1-devDaniel Stenberg
2019-01-07curl/urlapi.h: include "curl.h" firstDaniel Stenberg
This allows programs to include curl/urlapi.h directly. Reviewed-by: Daniel Gustafsson Reported-by: Ben Kohler Fixes #3438 Closes #3441
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-20curlver: bump to 7.64.0 for next releaseDaniel Stenberg
2018-12-14http: Implement trailing headers for chunked transfersAyoub Boudhar
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION options that allow a callback based approach to sending trailing headers with chunked transfers. The test server (sws) was updated to take into account the detection of the end of transfer in the case of trailing headers presence. Test 1591 checks that trailing headers can be sent using libcurl. Closes #3350
2018-11-19curle: move deprecated error code to ifndef blockHan Han
2018-11-09setopt: add CURLOPT_CURLUJim Fuller
Allows an application to pass in a pre-parsed URL via a URL handle. Closes #3227
2018-11-01version: bump for next cycleDaniel Stenberg
2018-11-01axtls: removedDaniel Stenberg
As has been outlined in the DEPRECATE.md document, the axTLS code has been disabled for 6 months and is hereby removed. Use a better supported TLS library! Assisted-by: Daniel Gustafsson Closes #3194
2018-10-30vtls: add MesaLink to curl_sslbackend enumDaniel Gustafsson
MesaLink support was added in commit 57348eb97d1b8fc3742e02c but the backend was never added to the curl_sslbackend enum in curl/curl.h. This adds the new backend to the enum and updates the relevant docs. Closes #3195 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-10-27system.h: use proper setting with Sun C++ as wellrandomswdev
system.h selects the proper Sun settings when __SUNPRO_C is defined. The Sun compiler does not define it when compiling C++ files. I'm adding a check also on __SUNPRO_CC to allow curl to work properly also when used in a C++ project on Sun Solaris. Closes #3181
2018-09-23whitespace fixesViktor Szakats
- replace tabs with spaces where possible - remove line ending spaces - remove double/triple newlines at EOF - fix a non-UTF-8 character - cleanup a few indentations/line continuations in manual examples Closes https://github.com/curl/curl/pull/3037
2018-09-19urlapi: document the error codes, remove two unused onesDaniel Stenberg
Assisted-by: Daniel Gustafsson Closes #3019
2018-09-19urlapi: add CURLU_GUESS_SCHEME and fix hostname acceptanceDaniel Stenberg
In order for this API to fully work for libcurl itself, it now offers a CURLU_GUESS_SCHEME flag that makes it "guess" scheme based on the host name prefix just like libcurl always did. If there's no known prefix, it will guess "http://". Separately, it relaxes the check of the host name so that IDN host names can be passed in as well. Both these changes are necessary for libcurl itself to use this API. Assisted-by: Daniel Gustafsson Closes #3018
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 07:22:24 +0000