aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2009-06-06ENH: add some cmake docs and fix build with socklen_tBill Hoffman
2009-06-04allow building libcurl for VxWorksYang Tse
2009-06-01John E. Malmberg's VMS specific clean-up for curl.hYang Tse
2009-05-30Allow compiling under AndroidDan Fandrich
2009-05-28Fixed a few comment typos (from the FreeBSD ports)Dan Fandrich
2009-05-18Update copyright year, to force CVS to update the $Id date string formatYang Tse
2009-05-18start climbing to 7.19.6Daniel Stenberg
2009-05-12fiX *__SOCKLEN_T definitions for remaining targetsYang Tse
2009-05-11fIX *__SOCKLEN_T definitions for SYMBIAN32 and VMS targetsYang Tse
2009-05-06fIX *__SOCKLEN_T definitions for OS400 and generic GCC targetsYang Tse
2009-05-04fIX *__SOCKLEN_T definitions for MVS and 370 targetsYang Tse
2009-05-04fIX *__SOCKLEN_T definitions for several Windows target tool-chainsYang Tse
2009-05-02This wasn't intended to be committed.Yang Tse
So, until fixed this will remain FIXME.
2009-05-02Use build-time configured curl_socklen_t instead of socklen_tYang Tse
2009-05-01David McCreedy's "TPF-platform specific changes to various files" patch ↵Yang Tse
follow-up
2009-05-01David McCreedy's "TPF-platform specific changes to various files" patchYang Tse
2009-04-29curl_socklen_t follow-upYang Tse
2009-04-28- Bug report #2709004 (http://curl.haxx.se/bug/view.cgi?id=2709004) by TimDaniel Stenberg
Chen pointed out how curl couldn't upload with resume when reading from a pipe. This ended up with the introduction of a new return code for the CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but that libcurl may try to resolve the situation anyway. In our case this means libcurl will attempt to instead read that much data from the stream instead of seeking and that way curl can now upload with resume when data is read from a stream!
2009-04-26Initial step towards a configure time curl_socklen_t definitionYang Tse
2009-04-09Cleaned up the custom definition I added (replaced by CURL_STATICLIB)Benoit Neil
2009-04-08Added special define for tests that directly include libcurl sources.Benoit Neil
2009-04-08Sun compilers specific preprocessor block removed from curlbuild.h.distYang Tse
2009-04-02Fix curl_off_t definition for builds done using Sun compilers and aYang Tse
non-configured libcurl. In this case curl_off_t data type was gated to the off_t data type which depends on the _FILE_OFFSET_BITS. This configuration is exactly the unwanted configuration for our curl_off_t data type which must not depend on such setting. This breaks ABI for libcurl libraries built with Sun compilers which were built without having run the configure script with _FILE_OFFSET_BITS different than 64 and using the ILP32 data model.
2009-04-02Initial CMake scripts (libcurl only), based on the merge of tetest scripts ↵Benoit Neil
and mine. These are far to be functionnal yet. PS: Hello world :)
2009-03-11- Kamil Dudka made the curl tool properly call curl_global_init() before anyDaniel Stenberg
other libcurl function.
2009-03-02start over on the journey towards 7.19.5Daniel Stenberg
2009-03-02- David Kierznowski notified us about a security flawDaniel Stenberg
(http://curl.haxx.se/docs/adv_20090303.html also known as CVE-2009-0037) in which previous libcurl versions (by design) can be tricked to access an arbitrary local/different file instead of a remote one when CURLOPT_FOLLOWLOCATION is enabled. This flaw is now fixed in this release together this the addition of two new setopt options for controlling this new behavior: o CURLOPT_REDIR_PROTOCOLS controls what protocols libcurl is allowed to follow to when CURLOPT_FOLLOWLOCATION is enabled. By default, this option excludes the FILE and SCP protocols and thus you nee to explicitly allow them in your app if you really want that behavior. o CURLOPT_PROTOCOLS controls what protocol(s) libcurl is allowed to fetch using the primary URL option. This is useful if you want to allow a user or other outsiders control what URL to pass to libcurl and yet not allow all protocols libcurl may have been built to support.
2009-02-17- CURLOPT_FTP_CREATE_MISSING_DIRS can now be set to 2 in addition to 1 forDaniel Stenberg
plain FTP connections, and it will then allow MKD to fail once and retry the CWD afterwards. This is especially useful if you're doing many simultanoes connections against the same server and they all have this option enabled, as then CWD may first fail but then another connection does MKD before this connection and thus MKD fails but trying CWD works! The numbers can (should?) now be set with the convenience enums now called CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY. Tests has proven that if you're making an application that uploads a set of files to an ftp server, you will get a noticable gain in speed if you're using multiple connections and this option will be then be very useful.
2009-02-11- CURLINFO_CONDITION_UNMET was added to allow an application to get to know ifDaniel Stenberg
the condition in the previous request was unmet. This is typically a time condition set with CURLOPT_TIMECONDITION and was previously not possible to reliably figure out. From bug report #2565128 (http://curl.haxx.se/bug/view.cgi?id=2565128)
2009-02-10remove a trailing name from a commentDaniel Stenberg
2009-02-02- Craig A West brought us: libcurl now defaults to do CONNECT with HTTPDaniel Stenberg
version 1.1 instead of 1.0 like before. This change also introduces the new proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0 option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0. I updated all test cases cases that use CONNECT and I tried to do some using --proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
2009-01-28- Markus Moeller introduced two new options to libcurl:Daniel Stenberg
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl to do GSS-style authentication with SOCKS5 proxies. The curl tool got the options called --socks5-gssapi-service and --socks5-gssapi-nec to enable these.
2009-01-26- Chad Monroe provided the new CURLOPT_TFTP_BLKSIZE option that allows an appDaniel Stenberg
to set desired block size to use for TFTP transfers instead of the default 512 bytes.
2009-01-25- Craig A West brought CURLOPT_NOPROXY and the corresponding --noproxy option.Daniel Stenberg
They basically offer the same thing the NO_PROXY environment variable only offered previously: list a set of host names that shall not use the proxy even if one is specified.
2009-01-19start over on our journey towards 7.19.4...Daniel Stenberg
2009-01-17fixed global copyright.Gunter Knauf
2009-01-16- Andrew de los Reyes fixed curlbuild.h for "generic" gcc builds on PPC, bothDaniel Stenberg
32 bit and 64 bit.
2009-01-13- Stefan Teleman brought a patch to fix the default curlbuild.h file for theDaniel Stenberg
SunPro compilers.
2008-12-10- Internet Explorer had a broken HTTP digest authentication before v7 andDaniel Stenberg
there are servers "out there" that relies on the client doing this broken Digest authentication. Apache even comes with an option to work with such broken clients. The difference is only for URLs that contain a query-part (a '?'-letter and text to the right of it). libcurl now supports this quirk, and you enable it by setting the CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH options. They are thus individually controlled to server and proxy.
2008-11-13and we are now on the 7.19.3 roadDaniel Stenberg
2008-11-05and we're back on square one working on the next release...Daniel Stenberg
2008-10-17remove some spurious line-endingsYang Tse
2008-10-16- Igor Novoseltsev added CURLOPT_PROXYUSER and CURLOPT_PROXYPASSWORD that thenDaniel Stenberg
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding these new options is that they have no problems with the colon separator that the CURLOPT_PROXYUSERPWD option does.
2008-10-09fix compiler warning: zero used for undefined preprocessing identifierYang Tse
2008-10-08- Igor Novoseltsev brought a patch that introduced two new options toDaniel Stenberg
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of deprecates the good old CURLOPT_USERPWD since they allow applications to set the user name and password independently and perhaps more importantly allow both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
2008-09-05- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renamesDaniel Stenberg
CURLOPT_POST301 (but adds a define for backwards compatibility for you who don't define CURL_NO_OLDIES). This option allows you to now also change the libcurl behavior for a HTTP response 302 after a POST to not use GET in the subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the patch somewhat before commit. The curl tool got a matching --post302 option. Test case 1076 was added to verify this.
2008-09-05- Introducing CURLOPT_CERTINFO and the corresponding CURLINFO_CERTINFO. ByDaniel Stenberg
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS or FTPS), libcurl will gather lots of server certificate info and that info can then get extracted by a client after the request has completed with curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing helped me test and smoothen out this feature. Unfortunately, this feature currently only works with libcurl built to use OpenSSL. This feature was sponsored by networking4all.com - thanks!
2008-09-02hex version number for 7.19.1 is 0x071301Yang Tse
2008-09-01clear the way for 7.19.1 work!Daniel Stenberg
2008-08-28Adjust curl_off_t definitions for DJGPP.Yang Tse
Ancient versions of DJGPP do not have a 64-bit data type.