aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2012-02-09CURLOPT_SSL_OPTIONS: addedDaniel Stenberg
Allow an appliction to set libcurl specific SSL options. The first and only options supported right now is CURLSSLOPT_ALLOW_BEAST. It will make libcurl to disable any work-arounds the underlying SSL library may have to address a known security flaw in the SSL3 and TLS1.0 protocol versions. This is a reaction to us unconditionally removing that behavior after this security advisory: http://curl.haxx.se/docs/adv_20120124B.html ... it did however cause a lot of programs to fail because of old servers not liking this work-around. Now programs can opt to decrease the security in order to interoperate with old servers better.
2012-02-09add library support for tuning TCP_KEEPALIVEDave Reisner
This adds three new options to control the behavior of TCP keepalives: - CURLOPT_TCP_KEEPALIVE: enable/disable probes - CURLOPT_TCP_KEEPIDLE: idle time before sending first probe - CURLOPT_TCP_KEEPINTVL: delay between successive probes While not all operating systems support the TCP_KEEPIDLE and TCP_KEEPINTVL knobs, the library will still allow these options to be set by clients, silently ignoring the values.
2012-01-25version: start working on 7.24.1-DEVYang Tse
2012-01-05curl.h: provide backwards compatible symbolsDaniel Stenberg
In commit c834213ad52 we re-used some obsolete error codes, and here are two defines that makes sure existing source codes that happen to use any of these deprecated ones will still compile. As usual, define CURL_NO_OLDIES to avoid getting these "precaution defines".
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-20curl.h: add __ANDROID__ macro checkCeĢdric Deltheil
When working with the Android Standalone Toolchain the compiler defines this macro: /path/to/arm-linux-androideabi-gcc -E -dM - < /dev/null \ | grep -i android #define __ANDROID__ 1 We really need to check both ANDROID and __ANDROID__ since I've observed that: * if you use Android.mk file(s) and the 'ndk-build' script (aka vanilla way), ANDROID is predefined (see -DANDROID extra C flag), * if you use the Android Standalone Toolchain, then __ANDROID__ is predefined as stated by the compiler
2011-11-17CURLOPT_DNS_SERVERS: set name servers if possibleJason Glasgow
2011-11-157.24.0: start the workDaniel Stenberg
2011-10-15typecheck: allow NULL to unset CURLOPT_ERRORBUFFERDave Reisner
There might be situations where a user would want to unset this option. Avoid forcing him/her to cast the NULL argument to (char *) in order to get past the compile time typecheck.
2011-10-03share: don't use SSL unless enabledDaniel Stenberg
Don't even declare the struct members for disabled features Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface when trying to set a sharing option that has been disabled (or not enabled) in the library.
2011-09-29curlverh.h: next release will be 7.23.0Daniel Stenberg
2011-09-26remove short-lived CURL_WRITEFUNC_OUT_OF_MEMORYYang Tse
2011-09-26Added unsigned char* to _curl_is_debug_cb.Guenter Knauf
2011-09-25allow write callbacks to indicate OOM to libcurlYang Tse
Allow (*curl_write_callback) write callbacks to return CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions inside the callback itself.
2011-09-137.22.1: start workingDaniel Stenberg
2011-08-26NTLM single-sign on adjustments (X)Yang Tse
Functions renamed: Curl_output_ntlm_sso -> Curl_output_ntlm_wb sso_ntlm_close -> wb_ntlm_close sso_ntlm_response -> wb_ntlm_response sso_ntlm_initiate -> wb_ntlm_initiate Preprocessor symbols renamed: CURLAUTH_NTLM_SSO -> CURLAUTH_NTLM_WB CURL_VERSION_NTLM_SSO -> CURL_VERSION_NTLM_WB
2011-08-09curl.h: mark deprecated CURLOPT_ options on same lineDaniel Stenberg
This is to aid easier machine parsing and to make sure nobody who reads these header lines can miss the info.
2011-08-08version bump: next release is 7.22.0Daniel Stenberg
2011-08-05BSD-style lwIP TCP/IP stack support - followupYang Tse
2011-08-04BSD-style lwIP TCP/IP stack support:Yang Tse
Allow compilation of libcurl and curl using BSD-style lwIP on Win32. In order to compile libcurl and curl with this support it is necessary to edit files lib/config-win32.h and src/config-win32.h and uncomment a line to make definition of preprocessor symbol USE_LWIPSOCK visible. Afterwards you can compile as usual. In order to use compiled library with BSD-style lwIP TCP/IP stack in your program it is mandatory that you include lwIP header file <lwip/opt.h> before including <curl/curl.h> or <curl/multi.h> Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from: http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.zip http://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip Have fun!
2011-08-04curl.h: untangle a preprocessor block, removing duplicate sys/types.h inclusionYang Tse
2011-08-03curl_gssapi: refine the handling of CURLOPT_GSSAPI_DELEGATIONKamil Dudka
Suggested by Richard Silverman.
2011-08-03Add new CURLOPT_GSSAPI_DELEGATION option.Adam Tkac
Curl_gss_init_sec_context got new parameter - SessionHandle. Signed-off-by: Adam Tkac <atkac@redhat.com>
2011-07-18NTLM single-sign on supportedMandy Wu
With the use of the 'ntlm_auth' tool from the Samba project
2011-06-23bump release: start working towards 7.21.8Daniel Stenberg
2011-05-18CLOSESOCKETFUNCTION: use the callbackDaniel Stenberg
Fix the return type of the callback to match close() and make use of it.
2011-05-18CLOSESOCKETFUNCTION: addedDaniel Stenberg
Introduced the initial setup to allow closesocket callbacks by making sure sclose() is only ever called from one place in the libcurl source and still run all test cases fine.
2011-05-09include: cleanupDaniel Stenberg
Made the public headers checksrc compliant Removed types.h (it's been unused since April 2004) Made the root makefile do make in include by default as well, so that TAGS and the checksrc will work better.
2011-05-05Corrected commentsDaniel Stenberg
closepolicy has been deprecated and unused for years
2011-04-22bump version: work towards 7.21.7Daniel Stenberg
2011-04-21Fix spelling errors in include/Fabian Keil
2011-04-18transfer-encoding: added new option and cmdlineDaniel Stenberg
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer Encoding in HTTP requests (if built zlib enabled). I also renamed CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name around) to reduce the confusion when we have to encoding options for HTTP. --tr-encoding is now the new command line option for curl to request this, and thus I updated the test cases accordingly.
2011-04-18CURLE_BAD_CONTENT_ENCODING: now used for transfer encoding tooDaniel Stenberg
2011-04-177.21.6: next planned release numberDaniel Stenberg
2011-04-05Fixed compatibility macro CURLE_URL_MALFORMAT_USERDan Fandrich
2011-04-05return code cleanup: build, init and run-time errorsDaniel Stenberg
Stop the abuse of CURLE_FAILED_INIT as return code for things not being init related by introducing two new return codes: CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for several years. It is used for returning error when something is attempted to be used but the feature/option was not enabled or explictitly disabled at build-time. Getting this error mostly means that libcurl needs to be rebuilt. CURLE_FAILED_INIT is now saved and used strictly for init failures. Getting this problem means something went seriously wrong, like a resource shortage or similar. CURLE_UNKNOWN_OPTION is the option formerly known as CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present, separately defined to be removed in a very distant future). This error code is meant to be used to return when an option is given to libcurl that isn't known. This problem would mostly indicate a problem in the program that uses libcurl.
2011-03-22headers: more copyright headers addedDaniel Stenberg
2011-02-17SOCKOPTFUNCTION: callback can say already-connectedDaniel Stenberg
Introducing a few CURL_SOCKOPT* defines for conveniance. The new CURL_SOCKOPT_ALREADY_CONNECTED signals to libcurl that the socket is to be treated as already connected and thus it will skip the connect() call.
2011-02-17curlver.h: bump to 7.21.5Daniel Stenberg
2011-02-09CURLE_TLSAUTH_FAILED: removedQuinn Slack
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It was only being raised when an internal error occurred while allocating or setting the GnuTLS SRP client credentials struct. For TLS authentication failures, the general CURLE_SSL_CONNECT_ERROR seems appropriate; its error string already includes "passwords" as a possible cause. Having a separate TLS auth error code might also cause people to think that a TLS auth failure means the wrong username or password was entered, when it could also be a sign of a man-in-the-middle attack.
2011-01-19TLS-SRP: support added when using GnuTLSQuinn Slack
2011-01-12build: allow usage of Borland 5.5.1 external preprocessor cpp32Yang Tse
2010-12-157.21.4: version bumpDaniel Stenberg
2010-11-11HTTP Auth: Add CURLAUTH_ONLYDaniel Stenberg
This is a meta symbol. OR this value together with a single specific auth value to force libcurl to probe for un-restricted auth and if not, only that single auth algorithm is acceptable. For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl first probe for what method to use, but yet only consider Digest to be acceptable. Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make libcurl explicitly use Digest right away and not do any probing.
2010-11-08CURLOPT_RESOLVE: addedDaniel Stenberg
CURLOPT_RESOLVE is a new option that sends along a curl_slist with name:port:address sets that will populate the DNS cache with entries so that request can be "fooled" to use another host than what otherwise would've been used. Previously we've encouraged the use of Host: for that when dealing with HTTP, but this new feature has the added bonus that it allows the name from the URL to be used for TLS SNI and server certificate name checks as well. This is a first change. Surely more will follow to make it decent.
2010-10-13curlver.h: start over at 7.21.3Daniel Stenberg
2010-08-25Gopher protocol support (initial release)Cameron Kaiser
2010-08-12typecheck-gcc: work around gcc upstream bug #32061Kamil Dudka
original bug report at https://bugzilla.redhat.com/617757
2010-08-11release cycle loop: start over toward 7.21.2Daniel Stenberg
2010-08-02typecheck-gcc: add checks for recently added optionsDaniel Stenberg
I added all OBJECTPOINT curl_easy_setopt() options from 178 to 202. Left to add: the five FUNCTIONPOINT (callbacks) options added since: SSH_KEYFUNCTION INTERLEAVEFUNCTION CHUNK_BGN_FUNCTION CHUNK_END_FUNCTION FNMATCH_FUNCTION
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:31:48 +0000