aboutsummaryrefslogtreecommitdiff
path: root/lib/asyn-thread.c
AgeCommit message (Collapse)Author
2016-02-03URLs: change all http:// URLs to https://Daniel Stenberg
2015-03-17checksrc: use space after commaDaniel Stenberg
2015-03-16free: instead of Curl_safefree()Daniel Stenberg
Since we just started make use of free(NULL) in order to simplify code, this change takes it a step further and: - converts lots of Curl_safefree() calls to good old free() - makes Curl_safefree() not check the pointer before free() The (new) rule of thumb is: if you really want a function call that frees a pointer and then assigns it to NULL, then use Curl_safefree(). But we will prefer just using free() from now on.
2015-03-16Bug #149: Deletion of unnecessary checks before calls of the function "free"Markus Elfring
The function "free" is documented in the way that no action shall occur for a passed null pointer. It is therefore not needed that a function caller repeats a corresponding check. http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-03mprintf.h: remove #ifdef CURLDEBUGDaniel Stenberg
... and as a consequence, introduce curl_printf.h with that re-define magic instead and make all libcurl code use that instead.
2014-12-27code/docs: Use correct case for IPv4 and IPv6Steve Holme
For consistency, as we seem to have a bit of a mixed bag, changed all instances of ipv4 and ipv6 in comments and documentations to use the correct case.
2014-12-14asyn-thread: We prefer 'CURLcode result'Steve Holme
2014-09-23threaded-resolver: revert Curl_expire_latest() switchDaniel Stenberg
The switch to using Curl_expire_latest() in commit cacdc27f52b was a mistake and was against the advice even mentioned in that commit. The comparison in asyn-thread.c:Curl_resolver_is_resolved() makes Curl_expire() the suitable function to use. Bug: http://curl.haxx.se/bug/view.cgi?id=1426 Reported-By: graysky
2014-08-31low-speed-limit: avoid timeout floodDaniel Stenberg
Introducing Curl_expire_latest(). To be used when we the code flow only wants to get called at a later time that is "no later than X" so that something can be checked (and another timeout be added). The low-speed logic for example could easily be made to set very many expire timeouts if it would be called faster or sooner than what it had set its own timer and this goes for a few other timers too that aren't explictiy checked for timer expiration in the code. If there's no condition the code that says if(time-passed >= TIME), then Curl_expire_latest() is preferred to Curl_expire(). If there exists such a condition, it is on the other hand important that Curl_expire() is used and not the other. Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html Reported-by: Florian Weimer
2014-08-31resolve: cache lookup for async resolversMichael Wallner
While waiting for a host resolve, check if the host cache may have gotten the name already (by someone else), for when the same name is resolved by several simultanoues requests. The resolver thread occasionally gets stuck in getaddrinfo() when the DNS or anything else is crappy or slow, so when a host is found in the DNS cache, leave the thread alone and let itself cleanup the mess.
2014-05-22bits.close: Fixed compilation warningSteve Holme
warning: implicit declaration of function 'connclose'
2014-05-22bits.close: introduce connection close trackingDaniel Stenberg
Make all code use connclose() and connkeep() when changing the "close state" for a connection. These two macros take a string argument with an explanation, and debug builds of curl will include that in the debug output. Helps tracking connection re-use/close issues.
2014-01-10threaded-resolver: never use NULL hints with getaddrinfoDaniel Stenberg
The net effect of this bug as it appeared to users, would be that libcurl would timeout in the connect phase. When disabling IPv6 use but still using getaddrinfo, libcurl would wrongly not init the "hints" struct field in init_thread_sync() which would subsequently lead to a getaddrinfo() invoke with a zeroed hints with ai_socktype set to 0 instead of SOCK_STREAM. This would lead to different behaviors on different platforms but basically incorrect output. This code was introduced in 483ff1ca75cbea, released in curl 7.20.0. This bug became a problem now due to the happy eyeballs code and how libcurl now traverses the getaddrinfo() results differently. Bug: http://curl.haxx.se/mail/lib-2014-01/0061.html Reported-by: Fabian Frank Debugged-by: Fabian Frank
2013-09-17dns: fix compilation with MinGW from commit df69440d05f113Steve Holme
Avoid 'interface' literal that some MinGW versions define as a macro Additionally, corrected some very, very minor coding style errors.
2013-09-12libcurl: New options to bind DNS to local interfaces or IP addressesKim Vandry
2013-09-10NI_MAXSERV: remove all use of itDaniel Stenberg
Solaris with the SunStudio Compiler is reportedly missing this define, but as we're using it without any good reason on all the places it was used I've now instead switched to just use sensible buffer sizes that fit a 32 bit decimal number. Which also happens to be smaller than the common NI_MAXSERV value which is 32 on most machines. Bug: http://curl.haxx.se/bug/view.cgi?id=1277 Reported-by: D.Flinkmann
2013-02-18resolver_error: remove wrong error message outputDaniel Stenberg
The attempt to use gai_strerror() or alternative function didn't work as the 'sock_error' field didn't contain the proper error code. But since this hasn't been reported and thus isn't really a big deal I decided to just scrap the whole attempt to output the detailed resolver error and instead remain with just stating that the resolving of the name failed.
2013-02-18Curl_resolver_is_resolved: show proper host name on failed resolveKim Vandry
2013-02-18Curl_resolver_is_resolved: fix compiler warningDaniel Stenberg
conversion to 'int' from 'long int' may alter its value
2013-01-09build: fix circular header inclusion with other packagesYang Tse
This commit renames lib/setup.h to lib/curl_setup.h and renames lib/setup_once.h to lib/curl_setup_once.h. Removes the need and usage of a header inclusion guard foreign to libcurl. [1] Removes the need and presence of an alarming notice we carried in old setup_once.h [2] ---------------------------------------- 1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H, this single inclusion guard is enough to ensure that inclusion of lib/setup_once.h done from lib/setup.h is only done once. Additionally lib/setup.h has always used __SETUP_ONCE_H macro to protect inclusion of setup_once.h even after commit ec691ca3, this was to avoid a circular header inclusion triggered when building a c-ares enabled version with c-ares sources available which also has a setup_once.h header. Commit ec691ca3 exposes the real nature of __SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard foreign to libcurl belonging to c-ares's setup_once.h The renaming this commit does, fixes the circular header inclusion, and as such removes the need and usage of a header inclusion guard foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl. 2 - Due to the circular interdependency of old lib/setup_once.h and the c-ares setup_once.h header, old file lib/setup_once.h has carried back from 2006 up to now days an alarming and prominent notice about the need of keeping libcurl's and c-ares's setup_once.h in sync. Given that this commit fixes the circular interdependency, the need and presence of mentioned notice is removed. All mentioned interdependencies come back from now old days when the c-ares project lived inside a curl subdirectory. This commit removes last traces of such fact.
2013-01-06Revert changes relative to lib/*.[ch] recent renamingYang Tse
This reverts renaming and usage of lib/*.h header files done 28-12-2012, reverting 2 commits: f871de0... build: make use of 76 lib/*.h renamed files ffd8e12... build: rename 76 lib/*.h files This also reverts removal of redundant include guard (redundant thanks to changes in above commits) done 2-12-2013, reverting 1 commit: c087374... curl_setup.h: remove redundant include guard This also reverts renaming and usage of lib/*.c source files done 3-12-2013, reverting 3 commits: 13606bb... build: make use of 93 lib/*.c renamed files 5b6e792... build: rename 93 lib/*.c files 7d83dff... build: commit 13606bbfde follow-up 1 Start of related discussion thread: http://curl.haxx.se/mail/lib-2013-01/0012.html Asking for confirmation on pushing this revertion commit: http://curl.haxx.se/mail/lib-2013-01/0048.html Confirmation summary: http://curl.haxx.se/mail/lib-2013-01/0079.html NOTICE: The list of 2 files that have been modified by other intermixed commits, while renamed, and also by at least one of the 6 commits this one reverts follows below. These 2 files will exhibit a hole in history unless git's '--follow' option is used when viewing logs. lib/curl_imap.h lib/curl_smtp.h
2013-01-03build: rename 93 lib/*.c filesYang Tse
93 lib/*.c source files renamed to use our standard naming scheme. This commit only does the file renaming. ---------------------------------------- renamed: lib/amigaos.c -> lib/curl_amigaos.c renamed: lib/asyn-ares.c -> lib/curl_asyn_ares.c renamed: lib/asyn-thread.c -> lib/curl_asyn_thread.c renamed: lib/axtls.c -> lib/curl_axtls.c renamed: lib/base64.c -> lib/curl_base64.c renamed: lib/bundles.c -> lib/curl_bundles.c renamed: lib/conncache.c -> lib/curl_conncache.c renamed: lib/connect.c -> lib/curl_connect.c renamed: lib/content_encoding.c -> lib/curl_content_encoding.c renamed: lib/cookie.c -> lib/curl_cookie.c renamed: lib/cyassl.c -> lib/curl_cyassl.c renamed: lib/dict.c -> lib/curl_dict.c renamed: lib/easy.c -> lib/curl_easy.c renamed: lib/escape.c -> lib/curl_escape.c renamed: lib/file.c -> lib/curl_file.c renamed: lib/fileinfo.c -> lib/curl_fileinfo.c renamed: lib/formdata.c -> lib/curl_formdata.c renamed: lib/ftp.c -> lib/curl_ftp.c renamed: lib/ftplistparser.c -> lib/curl_ftplistparser.c renamed: lib/getenv.c -> lib/curl_getenv.c renamed: lib/getinfo.c -> lib/curl_getinfo.c renamed: lib/gopher.c -> lib/curl_gopher.c renamed: lib/gtls.c -> lib/curl_gtls.c renamed: lib/hash.c -> lib/curl_hash.c renamed: lib/hmac.c -> lib/curl_hmac.c renamed: lib/hostasyn.c -> lib/curl_hostasyn.c renamed: lib/hostcheck.c -> lib/curl_hostcheck.c renamed: lib/hostip.c -> lib/curl_hostip.c renamed: lib/hostip4.c -> lib/curl_hostip4.c renamed: lib/hostip6.c -> lib/curl_hostip6.c renamed: lib/hostsyn.c -> lib/curl_hostsyn.c renamed: lib/http.c -> lib/curl_http.c renamed: lib/http_chunks.c -> lib/curl_http_chunks.c renamed: lib/http_digest.c -> lib/curl_http_digest.c renamed: lib/http_negotiate.c -> lib/curl_http_negotiate.c renamed: lib/http_negotiate_sspi.c -> lib/curl_http_negotiate_sspi.c renamed: lib/http_proxy.c -> lib/curl_http_proxy.c renamed: lib/idn_win32.c -> lib/curl_idn_win32.c renamed: lib/if2ip.c -> lib/curl_if2ip.c renamed: lib/imap.c -> lib/curl_imap.c renamed: lib/inet_ntop.c -> lib/curl_inet_ntop.c renamed: lib/inet_pton.c -> lib/curl_inet_pton.c renamed: lib/krb4.c -> lib/curl_krb4.c renamed: lib/krb5.c -> lib/curl_krb5.c renamed: lib/ldap.c -> lib/curl_ldap.c renamed: lib/llist.c -> lib/curl_llist.c renamed: lib/md4.c -> lib/curl_md4.c renamed: lib/md5.c -> lib/curl_md5.c renamed: lib/memdebug.c -> lib/curl_memdebug.c renamed: lib/mprintf.c -> lib/curl_mprintf.c renamed: lib/multi.c -> lib/curl_multi.c renamed: lib/netrc.c -> lib/curl_netrc.c renamed: lib/non-ascii.c -> lib/curl_non_ascii.c renamed: lib/curl_non-ascii.h -> lib/curl_non_ascii.h renamed: lib/nonblock.c -> lib/curl_nonblock.c renamed: lib/nss.c -> lib/curl_nss.c renamed: lib/nwlib.c -> lib/curl_nwlib.c renamed: lib/nwos.c -> lib/curl_nwos.c renamed: lib/openldap.c -> lib/curl_openldap.c renamed: lib/parsedate.c -> lib/curl_parsedate.c renamed: lib/pingpong.c -> lib/curl_pingpong.c renamed: lib/polarssl.c -> lib/curl_polarssl.c renamed: lib/pop3.c -> lib/curl_pop3.c renamed: lib/progress.c -> lib/curl_progress.c renamed: lib/qssl.c -> lib/curl_qssl.c renamed: lib/rawstr.c -> lib/curl_rawstr.c renamed: lib/rtsp.c -> lib/curl_rtsp.c renamed: lib/security.c -> lib/curl_security.c renamed: lib/select.c -> lib/curl_select.c renamed: lib/sendf.c -> lib/curl_sendf.c renamed: lib/share.c -> lib/curl_share.c renamed: lib/slist.c -> lib/curl_slist.c renamed: lib/smtp.c -> lib/curl_smtp.c renamed: lib/socks.c -> lib/curl_socks.c renamed: lib/socks_gssapi.c -> lib/curl_socks_gssapi.c renamed: lib/socks_sspi.c -> lib/curl_socks_sspi.c renamed: lib/speedcheck.c -> lib/curl_speedcheck.c renamed: lib/splay.c -> lib/curl_splay.c renamed: lib/ssh.c -> lib/curl_ssh.c renamed: lib/sslgen.c -> lib/curl_sslgen.c renamed: lib/ssluse.c -> lib/curl_ssluse.c renamed: lib/strdup.c -> lib/curl_strdup.c renamed: lib/strequal.c -> lib/curl_strequal.c renamed: lib/strerror.c -> lib/curl_strerror.c renamed: lib/strtok.c -> lib/curl_strtok.c renamed: lib/strtoofft.c -> lib/curl_strtoofft.c renamed: lib/telnet.c -> lib/curl_telnet.c renamed: lib/tftp.c -> lib/curl_tftp.c renamed: lib/timeval.c -> lib/curl_timeval.c renamed: lib/transfer.c -> lib/curl_transfer.c renamed: lib/url.c -> lib/curl_url.c renamed: lib/version.c -> lib/curl_version.c renamed: lib/warnless.c -> lib/curl_warnless.c renamed: lib/wildcard.c -> lib/curl_wildcard.c ----------------------------------------
2012-12-28build: make use of 76 lib/*.h renamed filesYang Tse
76 private header files renamed to use our standard naming scheme. This change affects 322 files in libcurl's source tree.
2012-12-14setup_once.h: refactor inclusion of <unistd.h> and <sys/socket.h>Yang Tse
Inclusion of top two most included header files now done in setup_once.h
2012-01-04win32-threaded-resolver: stop using a dummy socketDaniel Stenberg
Previously the code would create a dummy socket while resolving just to have curl_multi_fdset() return something but the non-win32 version doesn't do it this way and the creation and use of a socket that isn't made with the common create-socket callback can be confusing to apps using the multi_socket API etc. This change removes the dummy socket and thus will cause curl_multi_fdset() to return with maxfd == -1 more often.
2011-11-17CURLOPT_DNS_SERVERS: set name servers if possibleJason Glasgow
2011-08-06asyn-thread: check for dotted addresses before thread startsChristian Hägele
2011-07-26stdio.h, stdlib.h, string.h, stdarg.h and ctype.h inclusion done in setup_once.hYang Tse
2011-07-24errno.h inclusion conditionally done in setup_once.hYang Tse
2011-07-04code style: space between close paren and open braceDaniel Stenberg
2011-06-21asyn-thread: fix compiler warningYang Tse
compiler warning: variable is initialized but not referenced
2011-05-21compiler warning: fixYang Tse
Fix compiler warning: enumerated type mixed with another type
2011-04-29resolver_error: remove bad semicolonDaniel Stenberg
2011-04-28gai_strerror: provide private implementationDaniel Stenberg
There are systems (like NetWare) without its own gai_strerror() function.
2011-04-28treaded-resolver: better error messagesDaniel Stenberg
Now use gai_strerror() to get proper error messages when getaddrinfo() has failed. Detect the function in configure. Code based on work and suggestions by Jeff Pohlmeyer and Guenter Knauf
2011-04-27source cleanup: unify look, style and indent levelsDaniel Stenberg
By the use of a the new lib/checksrc.pl script that checks that our basic source style rules are followed.
2011-04-25async resolvers: further cleanupsDaniel Stenberg
asyn-ares.c and asyn-thread.c are two separate backends that implement the same (internal) async resolver API for libcurl to use. Backend is specified at build time. The internal resolver API is defined in asyn.h for asynch resolvers.