| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
|
|
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
|
|
... and as a consequence, introduce curl_printf.h with that re-define
magic instead and make all libcurl code use that instead.
|
|
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
|
|
|
|
The switch to using Curl_expire_latest() in commit cacdc27f52b was a
mistake and was against the advice even mentioned in that commit. The
comparison in asyn-thread.c:Curl_resolver_is_resolved() makes
Curl_expire() the suitable function to use.
Bug: http://curl.haxx.se/bug/view.cgi?id=1426
Reported-By: graysky
|
|
Introducing Curl_expire_latest(). To be used when we the code flow only
wants to get called at a later time that is "no later than X" so that
something can be checked (and another timeout be added).
The low-speed logic for example could easily be made to set very many
expire timeouts if it would be called faster or sooner than what it had
set its own timer and this goes for a few other timers too that aren't
explictiy checked for timer expiration in the code.
If there's no condition the code that says if(time-passed >= TIME), then
Curl_expire_latest() is preferred to Curl_expire().
If there exists such a condition, it is on the other hand important that
Curl_expire() is used and not the other.
Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html
Reported-by: Florian Weimer
|
|
While waiting for a host resolve, check if the host cache may have
gotten the name already (by someone else), for when the same name is
resolved by several simultanoues requests.
The resolver thread occasionally gets stuck in getaddrinfo() when the
DNS or anything else is crappy or slow, so when a host is found in the
DNS cache, leave the thread alone and let itself cleanup the mess.
|
|
warning: implicit declaration of function 'connclose'
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
The net effect of this bug as it appeared to users, would be that
libcurl would timeout in the connect phase.
When disabling IPv6 use but still using getaddrinfo, libcurl would
wrongly not init the "hints" struct field in init_thread_sync() which
would subsequently lead to a getaddrinfo() invoke with a zeroed hints
with ai_socktype set to 0 instead of SOCK_STREAM. This would lead to
different behaviors on different platforms but basically incorrect
output.
This code was introduced in 483ff1ca75cbea, released in curl 7.20.0.
This bug became a problem now due to the happy eyeballs code and how
libcurl now traverses the getaddrinfo() results differently.
Bug: http://curl.haxx.se/mail/lib-2014-01/0061.html
Reported-by: Fabian Frank
Debugged-by: Fabian Frank
|
|
Avoid 'interface' literal that some MinGW versions define as a macro
Additionally, corrected some very, very minor coding style errors.
|
|
|
|
Solaris with the SunStudio Compiler is reportedly missing this define,
but as we're using it without any good reason on all the places it was
used I've now instead switched to just use sensible buffer sizes that
fit a 32 bit decimal number. Which also happens to be smaller than the
common NI_MAXSERV value which is 32 on most machines.
Bug: http://curl.haxx.se/bug/view.cgi?id=1277
Reported-by: D.Flinkmann
|
|
The attempt to use gai_strerror() or alternative function didn't work as
the 'sock_error' field didn't contain the proper error code. But since
this hasn't been reported and thus isn't really a big deal I decided to
just scrap the whole attempt to output the detailed resolver error and
instead remain with just stating that the resolving of the name failed.
|
|
|
|
conversion to 'int' from 'long int' may alter its value
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
93 lib/*.c source files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: lib/amigaos.c -> lib/curl_amigaos.c
renamed: lib/asyn-ares.c -> lib/curl_asyn_ares.c
renamed: lib/asyn-thread.c -> lib/curl_asyn_thread.c
renamed: lib/axtls.c -> lib/curl_axtls.c
renamed: lib/base64.c -> lib/curl_base64.c
renamed: lib/bundles.c -> lib/curl_bundles.c
renamed: lib/conncache.c -> lib/curl_conncache.c
renamed: lib/connect.c -> lib/curl_connect.c
renamed: lib/content_encoding.c -> lib/curl_content_encoding.c
renamed: lib/cookie.c -> lib/curl_cookie.c
renamed: lib/cyassl.c -> lib/curl_cyassl.c
renamed: lib/dict.c -> lib/curl_dict.c
renamed: lib/easy.c -> lib/curl_easy.c
renamed: lib/escape.c -> lib/curl_escape.c
renamed: lib/file.c -> lib/curl_file.c
renamed: lib/fileinfo.c -> lib/curl_fileinfo.c
renamed: lib/formdata.c -> lib/curl_formdata.c
renamed: lib/ftp.c -> lib/curl_ftp.c
renamed: lib/ftplistparser.c -> lib/curl_ftplistparser.c
renamed: lib/getenv.c -> lib/curl_getenv.c
renamed: lib/getinfo.c -> lib/curl_getinfo.c
renamed: lib/gopher.c -> lib/curl_gopher.c
renamed: lib/gtls.c -> lib/curl_gtls.c
renamed: lib/hash.c -> lib/curl_hash.c
renamed: lib/hmac.c -> lib/curl_hmac.c
renamed: lib/hostasyn.c -> lib/curl_hostasyn.c
renamed: lib/hostcheck.c -> lib/curl_hostcheck.c
renamed: lib/hostip.c -> lib/curl_hostip.c
renamed: lib/hostip4.c -> lib/curl_hostip4.c
renamed: lib/hostip6.c -> lib/curl_hostip6.c
renamed: lib/hostsyn.c -> lib/curl_hostsyn.c
renamed: lib/http.c -> lib/curl_http.c
renamed: lib/http_chunks.c -> lib/curl_http_chunks.c
renamed: lib/http_digest.c -> lib/curl_http_digest.c
renamed: lib/http_negotiate.c -> lib/curl_http_negotiate.c
renamed: lib/http_negotiate_sspi.c -> lib/curl_http_negotiate_sspi.c
renamed: lib/http_proxy.c -> lib/curl_http_proxy.c
renamed: lib/idn_win32.c -> lib/curl_idn_win32.c
renamed: lib/if2ip.c -> lib/curl_if2ip.c
renamed: lib/imap.c -> lib/curl_imap.c
renamed: lib/inet_ntop.c -> lib/curl_inet_ntop.c
renamed: lib/inet_pton.c -> lib/curl_inet_pton.c
renamed: lib/krb4.c -> lib/curl_krb4.c
renamed: lib/krb5.c -> lib/curl_krb5.c
renamed: lib/ldap.c -> lib/curl_ldap.c
renamed: lib/llist.c -> lib/curl_llist.c
renamed: lib/md4.c -> lib/curl_md4.c
renamed: lib/md5.c -> lib/curl_md5.c
renamed: lib/memdebug.c -> lib/curl_memdebug.c
renamed: lib/mprintf.c -> lib/curl_mprintf.c
renamed: lib/multi.c -> lib/curl_multi.c
renamed: lib/netrc.c -> lib/curl_netrc.c
renamed: lib/non-ascii.c -> lib/curl_non_ascii.c
renamed: lib/curl_non-ascii.h -> lib/curl_non_ascii.h
renamed: lib/nonblock.c -> lib/curl_nonblock.c
renamed: lib/nss.c -> lib/curl_nss.c
renamed: lib/nwlib.c -> lib/curl_nwlib.c
renamed: lib/nwos.c -> lib/curl_nwos.c
renamed: lib/openldap.c -> lib/curl_openldap.c
renamed: lib/parsedate.c -> lib/curl_parsedate.c
renamed: lib/pingpong.c -> lib/curl_pingpong.c
renamed: lib/polarssl.c -> lib/curl_polarssl.c
renamed: lib/pop3.c -> lib/curl_pop3.c
renamed: lib/progress.c -> lib/curl_progress.c
renamed: lib/qssl.c -> lib/curl_qssl.c
renamed: lib/rawstr.c -> lib/curl_rawstr.c
renamed: lib/rtsp.c -> lib/curl_rtsp.c
renamed: lib/security.c -> lib/curl_security.c
renamed: lib/select.c -> lib/curl_select.c
renamed: lib/sendf.c -> lib/curl_sendf.c
renamed: lib/share.c -> lib/curl_share.c
renamed: lib/slist.c -> lib/curl_slist.c
renamed: lib/smtp.c -> lib/curl_smtp.c
renamed: lib/socks.c -> lib/curl_socks.c
renamed: lib/socks_gssapi.c -> lib/curl_socks_gssapi.c
renamed: lib/socks_sspi.c -> lib/curl_socks_sspi.c
renamed: lib/speedcheck.c -> lib/curl_speedcheck.c
renamed: lib/splay.c -> lib/curl_splay.c
renamed: lib/ssh.c -> lib/curl_ssh.c
renamed: lib/sslgen.c -> lib/curl_sslgen.c
renamed: lib/ssluse.c -> lib/curl_ssluse.c
renamed: lib/strdup.c -> lib/curl_strdup.c
renamed: lib/strequal.c -> lib/curl_strequal.c
renamed: lib/strerror.c -> lib/curl_strerror.c
renamed: lib/strtok.c -> lib/curl_strtok.c
renamed: lib/strtoofft.c -> lib/curl_strtoofft.c
renamed: lib/telnet.c -> lib/curl_telnet.c
renamed: lib/tftp.c -> lib/curl_tftp.c
renamed: lib/timeval.c -> lib/curl_timeval.c
renamed: lib/transfer.c -> lib/curl_transfer.c
renamed: lib/url.c -> lib/curl_url.c
renamed: lib/version.c -> lib/curl_version.c
renamed: lib/warnless.c -> lib/curl_warnless.c
renamed: lib/wildcard.c -> lib/curl_wildcard.c
----------------------------------------
|
|
76 private header files renamed to use our standard naming scheme.
This change affects 322 files in libcurl's source tree.
|
|
Inclusion of top two most included header files now done in setup_once.h
|
|
Previously the code would create a dummy socket while resolving just to
have curl_multi_fdset() return something but the non-win32 version
doesn't do it this way and the creation and use of a socket that isn't
made with the common create-socket callback can be confusing to apps
using the multi_socket API etc.
This change removes the dummy socket and thus will cause
curl_multi_fdset() to return with maxfd == -1 more often.
|
|
|
|
|
|
|
|
|
|
|
|
compiler warning: variable is initialized but not referenced
|
|
Fix compiler warning: enumerated type mixed with another type
|
|
|
|
There are systems (like NetWare) without its own gai_strerror()
function.
|
|
Now use gai_strerror() to get proper error messages when getaddrinfo()
has failed. Detect the function in configure.
Code based on work and suggestions by Jeff Pohlmeyer and Guenter Knauf
|
|
By the use of a the new lib/checksrc.pl script that checks that our
basic source style rules are followed.
|
|
asyn-ares.c and asyn-thread.c are two separate backends that implement
the same (internal) async resolver API for libcurl to use. Backend is
specified at build time.
The internal resolver API is defined in asyn.h for asynch resolvers.
|
