aboutsummaryrefslogtreecommitdiff
path: root/lib/connect.c
AgeCommit message (Collapse)Author
2014-10-04nonblock: call with (void) to show we ignore the return codeDaniel Stenberg
Coverity pointed out several of these.
2014-08-31low-speed-limit: avoid timeout floodDaniel Stenberg
Introducing Curl_expire_latest(). To be used when we the code flow only wants to get called at a later time that is "no later than X" so that something can be checked (and another timeout be added). The low-speed logic for example could easily be made to set very many expire timeouts if it would be called faster or sooner than what it had set its own timer and this goes for a few other timers too that aren't explictiy checked for timer expiration in the code. If there's no condition the code that says if(time-passed >= TIME), then Curl_expire_latest() is preferred to Curl_expire(). If there exists such a condition, it is on the other hand important that Curl_expire() is used and not the other. Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html Reported-by: Florian Weimer
2014-08-21win32: Fixed WinSock 2 #ifHaris Okanovic
A conditionally compiled block in connect.c references WinSock 2 symbols, but used `#ifdef HAVE_WINSOCK_H` instead of `#ifdef HAVE_WINSOCK2_H`. Bug: http://curl.haxx.se/mail/lib-2014-08/0155.html
2014-07-05compiler warnings: potentially uninitialized variablesMarcel Raad
... pointed out by MSVC2013 Bug: http://curl.haxx.se/bug/view.cgi?id=1391
2014-05-22bits.close: introduce connection close trackingDaniel Stenberg
Make all code use connclose() and connkeep() when changing the "close state" for a connection. These two macros take a string argument with an explanation, and debug builds of curl will include that in the debug output. Helps tracking connection re-use/close issues.
2014-05-15timers: fix timer regression involving redirects / reconnectsDaniel Stenberg
In commit 0b3750b5c23c25f (released in 7.36.0) we fixed a timeout issue but instead broke the timings. To fix this, I introduce a new timestamp to use for the timeouts and restored the previous timestamp and timestamp position so that the old timer functionality is restored. In addition to that, that change also broke connection timeouts for when more than one connect was used (as it would then count the total time from the first connect and not for the most recent one). Now Curl_timeleft() has been modified so that it checks against different start times depending on which timeout it checks. Test 1303 is updated accordingly. Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html Reported-by: Ryan Braud
2014-04-18connect.c: fix multiple possible dereferences of null pointersMarc Hoersken
In case the first address in the tempaddr array is NULL, the code would previously dereference an unchecked null pointer.
2014-03-19trynextip: don't store 'ai' on failed connects...Daniel Stenberg
It leads to the "next family" tries starting from the wrong point and thus fails! Bug: http://curl.haxx.se/bug/view.cgi?id=1337 Reported-by: ricker
2014-01-18win32: Added additional preprocessor check for Version Helper APISteve Holme
A follow up patch to commit d2671340a613 as _WIN32_WINNT_WIN2K and _WIN32_WINNT_WIN2K may not be defined on all systems.
2014-01-17win32: Corrected the preprocessor check for Version Helper APISteve Holme
Following some auto build failures after commit c7a76bb056f31e changed the preprocessor check to use _WIN32_WINNT.
2014-01-16connect.c:942:84: warning: Longer than 79 columnsDaniel Stenberg
2014-01-15connect.c: Corrected version compare in commit c7a76bb056f31eSteve Holme
2014-01-15win32: Fixed use of deprecated function 'GetVersionInfoEx' for VC12Steve Holme
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the GetVersionInfoEx() function has been marked as deprecated and it's return value atered. Updated connect.c and curl_sspi.c to use VerifyVersionInfo() where possible, which has been available since Windows 2000.
2014-01-12multi: remove MULTI_TIMEOUT_INACCURACYDaniel Stenberg
With the recently added timeout "reminder" functionality, there's no reason left for us to execute timeout code before the time is ripe. Simplifies the handling too. This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate again, which probably is most important when the *_MS versions are used. In multi_socket, make sure to update 'now' after having handled activity on a socket.
2014-01-08Curl_updateconninfo: don't do anything for UDP "connections"Daniel Stenberg
getpeername() doesn't work for UDP sockets since they're not connected Reported-by: Priyanka Shah Bug: http://curl.haxx.se/mail/archive-2014-01/0016.html
2014-01-08trynextip: fix build for non-IPV6 capable systemsDaniel Stenberg
AF_INET6 may not exist then Patched-by: Iida Yosiaki Bug: http://curl.haxx.se/bug/view.cgi?id=1322
2013-12-28connect.c: Fixed compilation warningSteve Holme
warning: 'res' may be used uninitialized in this function
2013-12-28connect: Try all addresses in first connection attemptBjörn Stenberg
Fixes a bug when all addresses in the first family fail immediately, due to "Network unreachable" for example, curl would hang and never try the next address family. Iterate through all address families when to trying establish the first connection attempt. Bug: http://curl.haxx.se/bug/view.cgi?id=1315 Reported-by: Michal Górny and Anthony G. Basile
2013-12-20vtls: renamed sslgen.[ch] to vtls.[ch]Daniel Stenberg
2013-12-20vtls: created subdir, moved sslgen.[ch] there, updated all include linesDaniel Stenberg
2013-12-04Curl_is_connected: use proxy name in error message when proxy is usedDaniel Stenberg
(bug introduced in 255826c4, never present in a release) Reported-by: Dima Tisnek Bug: http://curl.haxx.se/mail/lib-2013-12/0006.html
2013-11-27connect: Try next ip directly after immediate connect failBjörn Stenberg
This fixes a rare Happy Eyeballs bug where if the first IP family runs out of addresses before the second-family-timer fires, and the second IP family's first connect fails immediately, no further IPs of the second family are attempted.
2013-11-17connect: Close open but unconnected socket in singleipconnect()Steve Holme
singleipconnect() could return the file descriptor of an open socket even though the function returned a CURLE_COULDNT_CONNECT error code from commit ed1662c374361a and 02fbc26d59c591. This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and Solaris.
2013-11-14connect: Forgot to correct line endings before push in commit ed1662c374361aSteve Holme
2013-11-14connect: Return the socket descriptor even on failBjörn Stenberg
singleipconnect() did not return the open socket descriptor on some errors, thereby sometimes causing a socket leak. This patch ensures the socket is always returned.
2013-11-10connect: Close temporary sockets in conn_free()Björn Stenberg
The temporary sockets used for Happy Eyeballs were not closed properly, if curl exited prematurely, which this patch fixes.
2013-11-04connect: Add connection delay to Happy Eyeballs.Björn Stenberg
This patch adds a 200ms delay between the first and second address family socket connection attempts. It also iterates over IP addresses in the order returned by the system, meaning most dual-stack systems will try IPv6 first. Additionally, it refactors the connect code, removing most code that handled synchronous connects. Since all sockets are now non-blocking, the logic can be made simpler.
2013-11-03connect.c: Code policing on commit 5094bb53f4a027Steve Holme
No need for a rhs condition on a bitwise compare.
2013-11-03connect: Fixed "Whut?" no server connection failuresSteve Holme
Introduced in commit 7d7df831981fee curl would loop displaying "Whut?" if it was trying to connect to an address and port that didn't have anything listening on it.
2013-10-29bugfix: Don't block waiting for socket1 connect.Björn Stenberg
This patch fixes a bug in Happy Eyeballs where curl would wait for a connect response from socket1 before checking socket2. Also, it updates error messages for failed connections, showing the ip addresses that failed rather than just the host name repeatedly. Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html Reported-by: Paul Marks
2013-10-27Typo fix in trynextip().Björn Stenberg
2013-10-27Add "Happy Eyeballs" for IPv4/IPv6.Björn Stenberg
This patch invokes two socket connect()s nearly simultaneously, and the socket that is first connected "wins" and is subsequently used for the connection. The other is terminated. There is a very slight IPv4 preference, in that if both sockets connect simultaneously IPv4 is checked first and thus will win.
2013-10-26FTP: make the data connection work when going through proxyDaniel Stenberg
This is a regression since the switch to always-multi internally c43127414d89c. Test 1316 was modified since we now clearly call the Curl_client_write() function when doing the LIST transfer part and then the handler->protocol says FTP and ftpc.transfertype is 'A' which implies text converting even though that the response is initially a HTTP CONNECT response in this case.
2013-07-24string formatting: fix 25+ printf-style format stringsYang Tse
2013-06-20multi_socket: react on socket close immediatelyDaniel Stenberg
As a remedy to the problem when a socket gets closed and a new one is opened with the same file descriptor number and as a result multi.c:singlesocket() doesn't detect the difference, the new function Curl_multi_closed() gets told when a socket is closed so that it can be removed from the socket hash. When the old one has been removed, a new socket should be detected fine by the singlesocket() on next invoke. Bug: http://curl.haxx.se/bug/view.cgi?id=1248 Reported-by: Erik Johansson
2013-05-01bindlocal: move brace out of #ifdefLars Johannesen
The code within #ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID wrongly had two closing braces when it should only have one, so builds without that define would fail. Bug: http://curl.haxx.se/mail/lib-2013-05/0000.html
2013-04-08tcpkeepalive: Support CURLOPT_TCP_KEEPIDLE on OSXRobert Wruck
MacOS X doesn't have TCP_KEEPIDLE/TCP_KEEPINTVL but only a single TCP_KEEPALIVE (see http://developer.apple.com/library/mac/#DOCUMENTATION/Darwin/Reference/ManPages/man4/tcp.4.html). Here is a patch for CURLOPT_TCP_KEEPIDLE on OSX platforms.
2013-04-06connect: treat an interface bindlocal() problem as a non-fatal errorKim Vandry
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force transfers to use a particular interface but the transfer fails with CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the interface I specify has no IPv6 address. The cause is as follows: The remote hostname resolves successfully and has an IPv6 address and an IPv4 address. cURL attempts to connect to the IPv6 address first. bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an IPv6 address on the interface. This is a fatal error in singleipconnect() This change will make cURL try the next IP address in the list. Also included are two changes related to IPv6 address scope: - Filter the choice of address in Curl_if2ip to only consider addresses with the same scope ID as the connection address (mismatched scope for local and remote address does not result in a working connection). - bindlocal was ignoring the scope ID of addresses returned by Curl_if2ip . Now it uses them. Bug: http://curl.haxx.se/bug/view.cgi?id=1189
2013-04-02SO_SNDBUF: don't set SNDBUF for win32 versions vista or laterDaniel Stenberg
The Microsoft knowledge-base article http://support.microsoft.com/kb/823764 describes how to use SNDBUF to overcome a performance shortcoming in winsock, but it doesn't apply to Windows Vista and later versions. If the described SNDBUF magic is applied when running on those more recent Windows versions, it seems to instead have the reversed effect in many cases and thus make libcurl perform less good on those systems. This fix thus adds a run-time version-check that does the SNDBUF magic conditionally depending if it is deemed necessary or not. Bug: http://curl.haxx.se/bug/view.cgi?id=1188 Reported by: Andrew Kurushin Tested by: Christian Hägele
2013-04-01code-policedDaniel Stenberg
2013-03-31tcpkeepalive: support TCP_KEEPIDLE/TCP_KEEPINTVL on win32Daniel Stenberg
Patch by: Robert Wruck Bug: http://curl.haxx.se/bug/view.cgi?id=1209
2013-02-05singleipconnect: Update *sockp for all CURLE_OKTor Arntsen
The 56b7c87c7 change left a case where a good sockfd was not copied to *sockp before returning with CURLE_OK
2013-02-05singleipconnect: remove dead assignmentDaniel Stenberg
pointed out by clang-analyzer
2013-02-01singleipconnect: simplify and clean upDaniel Stenberg
Remove timeout argument that's never used. Make the actual connection get detected on a single spot to reduce code duplication. Store the IPv6 state already when the connection is attempted.
2013-01-17always-multi: always use non-blocking internalsDaniel Stenberg
Remove internal separated behavior of the easy vs multi intercace. curl_easy_perform() is now using the multi interface itself. Several minor multi interface quirks and bugs have been fixed in the process. Much help with debugging this has been provided by: Yang Tse
2013-01-09build: fix circular header inclusion with other packagesYang Tse
This commit renames lib/setup.h to lib/curl_setup.h and renames lib/setup_once.h to lib/curl_setup_once.h. Removes the need and usage of a header inclusion guard foreign to libcurl. [1] Removes the need and presence of an alarming notice we carried in old setup_once.h [2] ---------------------------------------- 1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H, this single inclusion guard is enough to ensure that inclusion of lib/setup_once.h done from lib/setup.h is only done once. Additionally lib/setup.h has always used __SETUP_ONCE_H macro to protect inclusion of setup_once.h even after commit ec691ca3, this was to avoid a circular header inclusion triggered when building a c-ares enabled version with c-ares sources available which also has a setup_once.h header. Commit ec691ca3 exposes the real nature of __SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard foreign to libcurl belonging to c-ares's setup_once.h The renaming this commit does, fixes the circular header inclusion, and as such removes the need and usage of a header inclusion guard foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl. 2 - Due to the circular interdependency of old lib/setup_once.h and the c-ares setup_once.h header, old file lib/setup_once.h has carried back from 2006 up to now days an alarming and prominent notice about the need of keeping libcurl's and c-ares's setup_once.h in sync. Given that this commit fixes the circular interdependency, the need and presence of mentioned notice is removed. All mentioned interdependencies come back from now old days when the c-ares project lived inside a curl subdirectory. This commit removes last traces of such fact.
2013-01-06Revert changes relative to lib/*.[ch] recent renamingYang Tse
This reverts renaming and usage of lib/*.h header files done 28-12-2012, reverting 2 commits: f871de0... build: make use of 76 lib/*.h renamed files ffd8e12... build: rename 76 lib/*.h files This also reverts removal of redundant include guard (redundant thanks to changes in above commits) done 2-12-2013, reverting 1 commit: c087374... curl_setup.h: remove redundant include guard This also reverts renaming and usage of lib/*.c source files done 3-12-2013, reverting 3 commits: 13606bb... build: make use of 93 lib/*.c renamed files 5b6e792... build: rename 93 lib/*.c files 7d83dff... build: commit 13606bbfde follow-up 1 Start of related discussion thread: http://curl.haxx.se/mail/lib-2013-01/0012.html Asking for confirmation on pushing this revertion commit: http://curl.haxx.se/mail/lib-2013-01/0048.html Confirmation summary: http://curl.haxx.se/mail/lib-2013-01/0079.html NOTICE: The list of 2 files that have been modified by other intermixed commits, while renamed, and also by at least one of the 6 commits this one reverts follows below. These 2 files will exhibit a hole in history unless git's '--follow' option is used when viewing logs. lib/curl_imap.h lib/curl_smtp.h
2013-01-03build: rename 93 lib/*.c filesYang Tse
93 lib/*.c source files renamed to use our standard naming scheme. This commit only does the file renaming. ---------------------------------------- renamed: lib/amigaos.c -> lib/curl_amigaos.c renamed: lib/asyn-ares.c -> lib/curl_asyn_ares.c renamed: lib/asyn-thread.c -> lib/curl_asyn_thread.c renamed: lib/axtls.c -> lib/curl_axtls.c renamed: lib/base64.c -> lib/curl_base64.c renamed: lib/bundles.c -> lib/curl_bundles.c renamed: lib/conncache.c -> lib/curl_conncache.c renamed: lib/connect.c -> lib/curl_connect.c renamed: lib/content_encoding.c -> lib/curl_content_encoding.c renamed: lib/cookie.c -> lib/curl_cookie.c renamed: lib/cyassl.c -> lib/curl_cyassl.c renamed: lib/dict.c -> lib/curl_dict.c renamed: lib/easy.c -> lib/curl_easy.c renamed: lib/escape.c -> lib/curl_escape.c renamed: lib/file.c -> lib/curl_file.c renamed: lib/fileinfo.c -> lib/curl_fileinfo.c renamed: lib/formdata.c -> lib/curl_formdata.c renamed: lib/ftp.c -> lib/curl_ftp.c renamed: lib/ftplistparser.c -> lib/curl_ftplistparser.c renamed: lib/getenv.c -> lib/curl_getenv.c renamed: lib/getinfo.c -> lib/curl_getinfo.c renamed: lib/gopher.c -> lib/curl_gopher.c renamed: lib/gtls.c -> lib/curl_gtls.c renamed: lib/hash.c -> lib/curl_hash.c renamed: lib/hmac.c -> lib/curl_hmac.c renamed: lib/hostasyn.c -> lib/curl_hostasyn.c renamed: lib/hostcheck.c -> lib/curl_hostcheck.c renamed: lib/hostip.c -> lib/curl_hostip.c renamed: lib/hostip4.c -> lib/curl_hostip4.c renamed: lib/hostip6.c -> lib/curl_hostip6.c renamed: lib/hostsyn.c -> lib/curl_hostsyn.c renamed: lib/http.c -> lib/curl_http.c renamed: lib/http_chunks.c -> lib/curl_http_chunks.c renamed: lib/http_digest.c -> lib/curl_http_digest.c renamed: lib/http_negotiate.c -> lib/curl_http_negotiate.c renamed: lib/http_negotiate_sspi.c -> lib/curl_http_negotiate_sspi.c renamed: lib/http_proxy.c -> lib/curl_http_proxy.c renamed: lib/idn_win32.c -> lib/curl_idn_win32.c renamed: lib/if2ip.c -> lib/curl_if2ip.c renamed: lib/imap.c -> lib/curl_imap.c renamed: lib/inet_ntop.c -> lib/curl_inet_ntop.c renamed: lib/inet_pton.c -> lib/curl_inet_pton.c renamed: lib/krb4.c -> lib/curl_krb4.c renamed: lib/krb5.c -> lib/curl_krb5.c renamed: lib/ldap.c -> lib/curl_ldap.c renamed: lib/llist.c -> lib/curl_llist.c renamed: lib/md4.c -> lib/curl_md4.c renamed: lib/md5.c -> lib/curl_md5.c renamed: lib/memdebug.c -> lib/curl_memdebug.c renamed: lib/mprintf.c -> lib/curl_mprintf.c renamed: lib/multi.c -> lib/curl_multi.c renamed: lib/netrc.c -> lib/curl_netrc.c renamed: lib/non-ascii.c -> lib/curl_non_ascii.c renamed: lib/curl_non-ascii.h -> lib/curl_non_ascii.h renamed: lib/nonblock.c -> lib/curl_nonblock.c renamed: lib/nss.c -> lib/curl_nss.c renamed: lib/nwlib.c -> lib/curl_nwlib.c renamed: lib/nwos.c -> lib/curl_nwos.c renamed: lib/openldap.c -> lib/curl_openldap.c renamed: lib/parsedate.c -> lib/curl_parsedate.c renamed: lib/pingpong.c -> lib/curl_pingpong.c renamed: lib/polarssl.c -> lib/curl_polarssl.c renamed: lib/pop3.c -> lib/curl_pop3.c renamed: lib/progress.c -> lib/curl_progress.c renamed: lib/qssl.c -> lib/curl_qssl.c renamed: lib/rawstr.c -> lib/curl_rawstr.c renamed: lib/rtsp.c -> lib/curl_rtsp.c renamed: lib/security.c -> lib/curl_security.c renamed: lib/select.c -> lib/curl_select.c renamed: lib/sendf.c -> lib/curl_sendf.c renamed: lib/share.c -> lib/curl_share.c renamed: lib/slist.c -> lib/curl_slist.c renamed: lib/smtp.c -> lib/curl_smtp.c renamed: lib/socks.c -> lib/curl_socks.c renamed: lib/socks_gssapi.c -> lib/curl_socks_gssapi.c renamed: lib/socks_sspi.c -> lib/curl_socks_sspi.c renamed: lib/speedcheck.c -> lib/curl_speedcheck.c renamed: lib/splay.c -> lib/curl_splay.c renamed: lib/ssh.c -> lib/curl_ssh.c renamed: lib/sslgen.c -> lib/curl_sslgen.c renamed: lib/ssluse.c -> lib/curl_ssluse.c renamed: lib/strdup.c -> lib/curl_strdup.c renamed: lib/strequal.c -> lib/curl_strequal.c renamed: lib/strerror.c -> lib/curl_strerror.c renamed: lib/strtok.c -> lib/curl_strtok.c renamed: lib/strtoofft.c -> lib/curl_strtoofft.c renamed: lib/telnet.c -> lib/curl_telnet.c renamed: lib/tftp.c -> lib/curl_tftp.c renamed: lib/timeval.c -> lib/curl_timeval.c renamed: lib/transfer.c -> lib/curl_transfer.c renamed: lib/url.c -> lib/curl_url.c renamed: lib/version.c -> lib/curl_version.c renamed: lib/warnless.c -> lib/curl_warnless.c renamed: lib/wildcard.c -> lib/curl_wildcard.c ----------------------------------------
2012-12-28build: make use of 76 lib/*.h renamed filesYang Tse
76 private header files renamed to use our standard naming scheme. This change affects 322 files in libcurl's source tree.
2012-12-14setup_once.h: refactor inclusion of <unistd.h> and <sys/socket.h>Yang Tse
Inclusion of top two most included header files now done in setup_once.h