aboutsummaryrefslogtreecommitdiff
path: root/lib/connect.c
AgeCommit message (Collapse)Author
2015-03-07conncontrol: only log changes to the connection bitDaniel Stenberg
2015-03-03mprintf.h: remove #ifdef CURLDEBUGDaniel Stenberg
... and as a consequence, introduce curl_printf.h with that re-define magic instead and make all libcurl code use that instead.
2015-02-23connect: wait for IPv4 connection attemptsKamil Dudka
... even if the last IPv6 connection attempt has failed. Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1187531#c4
2015-02-23connect: avoid skipping an IPv4 addressKamil Dudka
... in case the protocol versions are mixed in a DNS response (IPv6 -> IPv4 -> IPv6). Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1187531#c3
2015-01-20ipv6: enclose AF_INET6 uses with proper #ifdefs for ipv6Daniel Stenberg
Reported-by: Chris Young
2014-12-27code/docs: Use correct case for IPv4 and IPv6Steve Holme
For consistency, as we seem to have a bit of a mixed bag, changed all instances of ipv4 and ipv6 in comments and documentations to use the correct case.
2014-12-16IPV6: address scope != scope idPatrick Monnerat
There was a confusion between these: this commit tries to disambiguate them. - Scope can be computed from the address itself. - Scope id is scope dependent: it is currently defined as 1-based local interface index for link-local scoped addresses, and as a site index(?) for (obsolete) site-local addresses. Linux only supports it for link-local addresses. The URL parser properly parses a scope id as an interface index, but stores it in a field named "scope": confusion. The field has been renamed into "scope_id". Curl_if2ip() used the scope id as it was a scope. This caused failures to bind to an interface. Scope is now computed from the addresses and Curl_if2ip() matches them. If redundantly specified in the URL, scope id is check for mismatch with the interface index. This commit should fix SF bug #1451.
2014-12-16connect: singleipconnect(): properly try other address families after failurePatrick Monnerat
2014-12-04updateconninfo: clear destination struct before getsockname()Daniel Stenberg
Otherwise we may read uninitialized bytes later in the unix-domain sockets case.
2014-11-30lib/connect: restrict IP/TCP options to said socketsPeter Wu
This patch prepares for adding UNIX domain sockets support. TCP_NODELAY and TCP_KEEPALIVE are specific to TCP/IP sockets, so do not apply these to other socket types. bindlocal only works for IP sockets (independent of TCP/UDP), so filter that out too for other types. Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-19multi: inform about closed sockets before they are closedJon Spencer
When the connection code decides to close a socket it informs the multi system via the Curl_multi_closed function. The multi system may, in turn, invoke the CURLMOPT_SOCKETFUNCTION function with CURL_POLL_REMOVE. This happens after the socket has already been closed. Reorder the code so that CURL_POLL_REMOVE is called before the socket is closed.
2014-11-18debug: added new connection cache output, plus fixupsCarlo Wood
Debug output 'typo' fix. Don't print an extra "0x" in * Pipe broke: handle 0x0x2546d88, url = / Add debug output. Print the number of connections in the connection cache when adding one, and not only when one is removed. Fix typos in comments.
2014-11-16connect.c: Fixed compilation warning when no verbose string supportSteve Holme
warning: unused parameter 'reason'
2014-10-30code cleanup: Use 'CURLcode result'Steve Holme
2014-10-28code cleanup: We prefer 'CURLcode result'Steve Holme
2014-10-24code cleanup: we prefer 'CURLcode result'Daniel Stenberg
... for the local variable name in functions holding the return code. Using the same name universally makes code easier to read and follow. Also, unify code for checking for CURLcode errors with: if(result) or if(!result) instead of if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
2014-10-14cleanups: reduce variable scopeDaniel Stenberg
cppcheck pointed these out.
2014-10-14singleipconnect: remove dead assignment never usedDaniel Stenberg
cppcheck pointed this out.
2014-10-04nonblock: call with (void) to show we ignore the return codeDaniel Stenberg
Coverity pointed out several of these.
2014-08-31low-speed-limit: avoid timeout floodDaniel Stenberg
Introducing Curl_expire_latest(). To be used when we the code flow only wants to get called at a later time that is "no later than X" so that something can be checked (and another timeout be added). The low-speed logic for example could easily be made to set very many expire timeouts if it would be called faster or sooner than what it had set its own timer and this goes for a few other timers too that aren't explictiy checked for timer expiration in the code. If there's no condition the code that says if(time-passed >= TIME), then Curl_expire_latest() is preferred to Curl_expire(). If there exists such a condition, it is on the other hand important that Curl_expire() is used and not the other. Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html Reported-by: Florian Weimer
2014-08-21win32: Fixed WinSock 2 #ifHaris Okanovic
A conditionally compiled block in connect.c references WinSock 2 symbols, but used `#ifdef HAVE_WINSOCK_H` instead of `#ifdef HAVE_WINSOCK2_H`. Bug: http://curl.haxx.se/mail/lib-2014-08/0155.html
2014-07-05compiler warnings: potentially uninitialized variablesMarcel Raad
... pointed out by MSVC2013 Bug: http://curl.haxx.se/bug/view.cgi?id=1391
2014-05-22bits.close: introduce connection close trackingDaniel Stenberg
Make all code use connclose() and connkeep() when changing the "close state" for a connection. These two macros take a string argument with an explanation, and debug builds of curl will include that in the debug output. Helps tracking connection re-use/close issues.
2014-05-15timers: fix timer regression involving redirects / reconnectsDaniel Stenberg
In commit 0b3750b5c23c25f (released in 7.36.0) we fixed a timeout issue but instead broke the timings. To fix this, I introduce a new timestamp to use for the timeouts and restored the previous timestamp and timestamp position so that the old timer functionality is restored. In addition to that, that change also broke connection timeouts for when more than one connect was used (as it would then count the total time from the first connect and not for the most recent one). Now Curl_timeleft() has been modified so that it checks against different start times depending on which timeout it checks. Test 1303 is updated accordingly. Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html Reported-by: Ryan Braud
2014-04-18connect.c: fix multiple possible dereferences of null pointersMarc Hoersken
In case the first address in the tempaddr array is NULL, the code would previously dereference an unchecked null pointer.
2014-03-19trynextip: don't store 'ai' on failed connects...Daniel Stenberg
It leads to the "next family" tries starting from the wrong point and thus fails! Bug: http://curl.haxx.se/bug/view.cgi?id=1337 Reported-by: ricker
2014-01-18win32: Added additional preprocessor check for Version Helper APISteve Holme
A follow up patch to commit d2671340a613 as _WIN32_WINNT_WIN2K and _WIN32_WINNT_WIN2K may not be defined on all systems.
2014-01-17win32: Corrected the preprocessor check for Version Helper APISteve Holme
Following some auto build failures after commit c7a76bb056f31e changed the preprocessor check to use _WIN32_WINNT.
2014-01-16connect.c:942:84: warning: Longer than 79 columnsDaniel Stenberg
2014-01-15connect.c: Corrected version compare in commit c7a76bb056f31eSteve Holme
2014-01-15win32: Fixed use of deprecated function 'GetVersionInfoEx' for VC12Steve Holme
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the GetVersionInfoEx() function has been marked as deprecated and it's return value atered. Updated connect.c and curl_sspi.c to use VerifyVersionInfo() where possible, which has been available since Windows 2000.
2014-01-12multi: remove MULTI_TIMEOUT_INACCURACYDaniel Stenberg
With the recently added timeout "reminder" functionality, there's no reason left for us to execute timeout code before the time is ripe. Simplifies the handling too. This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate again, which probably is most important when the *_MS versions are used. In multi_socket, make sure to update 'now' after having handled activity on a socket.
2014-01-08Curl_updateconninfo: don't do anything for UDP "connections"Daniel Stenberg
getpeername() doesn't work for UDP sockets since they're not connected Reported-by: Priyanka Shah Bug: http://curl.haxx.se/mail/archive-2014-01/0016.html
2014-01-08trynextip: fix build for non-IPV6 capable systemsDaniel Stenberg
AF_INET6 may not exist then Patched-by: Iida Yosiaki Bug: http://curl.haxx.se/bug/view.cgi?id=1322
2013-12-28connect.c: Fixed compilation warningSteve Holme
warning: 'res' may be used uninitialized in this function
2013-12-28connect: Try all addresses in first connection attemptBjörn Stenberg
Fixes a bug when all addresses in the first family fail immediately, due to "Network unreachable" for example, curl would hang and never try the next address family. Iterate through all address families when to trying establish the first connection attempt. Bug: http://curl.haxx.se/bug/view.cgi?id=1315 Reported-by: Michal Górny and Anthony G. Basile
2013-12-20vtls: renamed sslgen.[ch] to vtls.[ch]Daniel Stenberg
2013-12-20vtls: created subdir, moved sslgen.[ch] there, updated all include linesDaniel Stenberg
2013-12-04Curl_is_connected: use proxy name in error message when proxy is usedDaniel Stenberg
(bug introduced in 255826c4, never present in a release) Reported-by: Dima Tisnek Bug: http://curl.haxx.se/mail/lib-2013-12/0006.html
2013-11-27connect: Try next ip directly after immediate connect failBjörn Stenberg
This fixes a rare Happy Eyeballs bug where if the first IP family runs out of addresses before the second-family-timer fires, and the second IP family's first connect fails immediately, no further IPs of the second family are attempted.
2013-11-17connect: Close open but unconnected socket in singleipconnect()Steve Holme
singleipconnect() could return the file descriptor of an open socket even though the function returned a CURLE_COULDNT_CONNECT error code from commit ed1662c374361a and 02fbc26d59c591. This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and Solaris.
2013-11-14connect: Forgot to correct line endings before push in commit ed1662c374361aSteve Holme
2013-11-14connect: Return the socket descriptor even on failBjörn Stenberg
singleipconnect() did not return the open socket descriptor on some errors, thereby sometimes causing a socket leak. This patch ensures the socket is always returned.
2013-11-10connect: Close temporary sockets in conn_free()Björn Stenberg
The temporary sockets used for Happy Eyeballs were not closed properly, if curl exited prematurely, which this patch fixes.
2013-11-04connect: Add connection delay to Happy Eyeballs.Björn Stenberg
This patch adds a 200ms delay between the first and second address family socket connection attempts. It also iterates over IP addresses in the order returned by the system, meaning most dual-stack systems will try IPv6 first. Additionally, it refactors the connect code, removing most code that handled synchronous connects. Since all sockets are now non-blocking, the logic can be made simpler.
2013-11-03connect.c: Code policing on commit 5094bb53f4a027Steve Holme
No need for a rhs condition on a bitwise compare.
2013-11-03connect: Fixed "Whut?" no server connection failuresSteve Holme
Introduced in commit 7d7df831981fee curl would loop displaying "Whut?" if it was trying to connect to an address and port that didn't have anything listening on it.
2013-10-29bugfix: Don't block waiting for socket1 connect.Björn Stenberg
This patch fixes a bug in Happy Eyeballs where curl would wait for a connect response from socket1 before checking socket2. Also, it updates error messages for failed connections, showing the ip addresses that failed rather than just the host name repeatedly. Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html Reported-by: Paul Marks
2013-10-27Typo fix in trynextip().Björn Stenberg
2013-10-27Add "Happy Eyeballs" for IPv4/IPv6.Björn Stenberg
This patch invokes two socket connect()s nearly simultaneously, and the socket that is first connected "wins" and is subsequently used for the connection. The other is terminated. There is a very slight IPv4 preference, in that if both sockets connect simultaneously IPv4 is checked first and thus will win.