| Age | Commit message (Collapse) | Author |
|---|
|
Introducing Curl_expire_latest(). To be used when we the code flow only
wants to get called at a later time that is "no later than X" so that
something can be checked (and another timeout be added).
The low-speed logic for example could easily be made to set very many
expire timeouts if it would be called faster or sooner than what it had
set its own timer and this goes for a few other timers too that aren't
explictiy checked for timer expiration in the code.
If there's no condition the code that says if(time-passed >= TIME), then
Curl_expire_latest() is preferred to Curl_expire().
If there exists such a condition, it is on the other hand important that
Curl_expire() is used and not the other.
Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html
Reported-by: Florian Weimer
|
|
A conditionally compiled block in connect.c references WinSock 2
symbols, but used `#ifdef HAVE_WINSOCK_H` instead of `#ifdef
HAVE_WINSOCK2_H`.
Bug: http://curl.haxx.se/mail/lib-2014-08/0155.html
|
|
... pointed out by MSVC2013
Bug: http://curl.haxx.se/bug/view.cgi?id=1391
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
In commit 0b3750b5c23c25f (released in 7.36.0) we fixed a timeout issue
but instead broke the timings.
To fix this, I introduce a new timestamp to use for the timeouts and
restored the previous timestamp and timestamp position so that the old
timer functionality is restored.
In addition to that, that change also broke connection timeouts for when
more than one connect was used (as it would then count the total time
from the first connect and not for the most recent one). Now
Curl_timeleft() has been modified so that it checks against different
start times depending on which timeout it checks.
Test 1303 is updated accordingly.
Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html
Reported-by: Ryan Braud
|
|
In case the first address in the tempaddr array is NULL,
the code would previously dereference an unchecked null pointer.
|
|
It leads to the "next family" tries starting from the wrong point and thus
fails!
Bug: http://curl.haxx.se/bug/view.cgi?id=1337
Reported-by: ricker
|
|
A follow up patch to commit d2671340a613 as _WIN32_WINNT_WIN2K and
_WIN32_WINNT_WIN2K may not be defined on all systems.
|
|
Following some auto build failures after commit c7a76bb056f31e changed
the preprocessor check to use _WIN32_WINNT.
|
|
|
|
|
|
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the
GetVersionInfoEx() function has been marked as deprecated and it's
return value atered. Updated connect.c and curl_sspi.c to use
VerifyVersionInfo() where possible, which has been available since
Windows 2000.
|
|
With the recently added timeout "reminder" functionality, there's no
reason left for us to execute timeout code before the time is
ripe. Simplifies the handling too.
This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate
again, which probably is most important when the *_MS versions are used.
In multi_socket, make sure to update 'now' after having handled activity
on a socket.
|
|
getpeername() doesn't work for UDP sockets since they're not connected
Reported-by: Priyanka Shah
Bug: http://curl.haxx.se/mail/archive-2014-01/0016.html
|
|
AF_INET6 may not exist then
Patched-by: Iida Yosiaki
Bug: http://curl.haxx.se/bug/view.cgi?id=1322
|
|
warning: 'res' may be used uninitialized in this function
|
|
Fixes a bug when all addresses in the first family fail immediately, due
to "Network unreachable" for example, curl would hang and never try the
next address family.
Iterate through all address families when to trying establish the first
connection attempt.
Bug: http://curl.haxx.se/bug/view.cgi?id=1315
Reported-by: Michal Górny and Anthony G. Basile
|
|
|
|
|
|
(bug introduced in 255826c4, never present in a release)
Reported-by: Dima Tisnek
Bug: http://curl.haxx.se/mail/lib-2013-12/0006.html
|
|
This fixes a rare Happy Eyeballs bug where if the first IP family runs
out of addresses before the second-family-timer fires, and the second
IP family's first connect fails immediately, no further IPs of the
second family are attempted.
|
|
singleipconnect() could return the file descriptor of an open socket
even though the function returned a CURLE_COULDNT_CONNECT error code
from commit ed1662c374361a and 02fbc26d59c591.
This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and
Solaris.
|
|
|
|
singleipconnect() did not return the open socket descriptor on some
errors, thereby sometimes causing a socket leak. This patch ensures
the socket is always returned.
|
|
The temporary sockets used for Happy Eyeballs were not closed properly,
if curl exited prematurely, which this patch fixes.
|
|
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
|
|
No need for a rhs condition on a bitwise compare.
|
|
Introduced in commit 7d7df831981fee curl would loop displaying "Whut?"
if it was trying to connect to an address and port that didn't have
anything listening on it.
|
|
This patch fixes a bug in Happy Eyeballs where curl would wait for a
connect response from socket1 before checking socket2.
Also, it updates error messages for failed connections, showing the ip
addresses that failed rather than just the host name repeatedly.
Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html
Reported-by: Paul Marks
|
|
|
|
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
|
|
This is a regression since the switch to always-multi internally
c43127414d89c.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
|
|
|
|
As a remedy to the problem when a socket gets closed and a new one is
opened with the same file descriptor number and as a result
multi.c:singlesocket() doesn't detect the difference, the new function
Curl_multi_closed() gets told when a socket is closed so that it can be
removed from the socket hash. When the old one has been removed, a new
socket should be detected fine by the singlesocket() on next invoke.
Bug: http://curl.haxx.se/bug/view.cgi?id=1248
Reported-by: Erik Johansson
|
|
The code within #ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID wrongly had two
closing braces when it should only have one, so builds without that
define would fail.
Bug: http://curl.haxx.se/mail/lib-2013-05/0000.html
|
|
MacOS X doesn't have TCP_KEEPIDLE/TCP_KEEPINTVL but only a single
TCP_KEEPALIVE (see
http://developer.apple.com/library/mac/#DOCUMENTATION/Darwin/Reference/ManPages/man4/tcp.4.html).
Here is a patch for CURLOPT_TCP_KEEPIDLE on OSX platforms.
|
|
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
|
|
The Microsoft knowledge-base article
http://support.microsoft.com/kb/823764 describes how to use SNDBUF to
overcome a performance shortcoming in winsock, but it doesn't apply to
Windows Vista and later versions. If the described SNDBUF magic is
applied when running on those more recent Windows versions, it seems to
instead have the reversed effect in many cases and thus make libcurl
perform less good on those systems.
This fix thus adds a run-time version-check that does the SNDBUF magic
conditionally depending if it is deemed necessary or not.
Bug: http://curl.haxx.se/bug/view.cgi?id=1188
Reported by: Andrew Kurushin
Tested by: Christian Hägele
|
|
|
|
Patch by: Robert Wruck
Bug: http://curl.haxx.se/bug/view.cgi?id=1209
|
|
The 56b7c87c7 change left a case where a good sockfd was not copied to
*sockp before returning with CURLE_OK
|
|
pointed out by clang-analyzer
|
|
Remove timeout argument that's never used.
Make the actual connection get detected on a single spot to reduce code
duplication.
Store the IPv6 state already when the connection is attempted.
|
|
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
93 lib/*.c source files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: lib/amigaos.c -> lib/curl_amigaos.c
renamed: lib/asyn-ares.c -> lib/curl_asyn_ares.c
renamed: lib/asyn-thread.c -> lib/curl_asyn_thread.c
renamed: lib/axtls.c -> lib/curl_axtls.c
renamed: lib/base64.c -> lib/curl_base64.c
renamed: lib/bundles.c -> lib/curl_bundles.c
renamed: lib/conncache.c -> lib/curl_conncache.c
renamed: lib/connect.c -> lib/curl_connect.c
renamed: lib/content_encoding.c -> lib/curl_content_encoding.c
renamed: lib/cookie.c -> lib/curl_cookie.c
renamed: lib/cyassl.c -> lib/curl_cyassl.c
renamed: lib/dict.c -> lib/curl_dict.c
renamed: lib/easy.c -> lib/curl_easy.c
renamed: lib/escape.c -> lib/curl_escape.c
renamed: lib/file.c -> lib/curl_file.c
renamed: lib/fileinfo.c -> lib/curl_fileinfo.c
renamed: lib/formdata.c -> lib/curl_formdata.c
renamed: lib/ftp.c -> lib/curl_ftp.c
renamed: lib/ftplistparser.c -> lib/curl_ftplistparser.c
renamed: lib/getenv.c -> lib/curl_getenv.c
renamed: lib/getinfo.c -> lib/curl_getinfo.c
renamed: lib/gopher.c -> lib/curl_gopher.c
renamed: lib/gtls.c -> lib/curl_gtls.c
renamed: lib/hash.c -> lib/curl_hash.c
renamed: lib/hmac.c -> lib/curl_hmac.c
renamed: lib/hostasyn.c -> lib/curl_hostasyn.c
renamed: lib/hostcheck.c -> lib/curl_hostcheck.c
renamed: lib/hostip.c -> lib/curl_hostip.c
renamed: lib/hostip4.c -> lib/curl_hostip4.c
renamed: lib/hostip6.c -> lib/curl_hostip6.c
renamed: lib/hostsyn.c -> lib/curl_hostsyn.c
renamed: lib/http.c -> lib/curl_http.c
renamed: lib/http_chunks.c -> lib/curl_http_chunks.c
renamed: lib/http_digest.c -> lib/curl_http_digest.c
renamed: lib/http_negotiate.c -> lib/curl_http_negotiate.c
renamed: lib/http_negotiate_sspi.c -> lib/curl_http_negotiate_sspi.c
renamed: lib/http_proxy.c -> lib/curl_http_proxy.c
renamed: lib/idn_win32.c -> lib/curl_idn_win32.c
renamed: lib/if2ip.c -> lib/curl_if2ip.c
renamed: lib/imap.c -> lib/curl_imap.c
renamed: lib/inet_ntop.c -> lib/curl_inet_ntop.c
renamed: lib/inet_pton.c -> lib/curl_inet_pton.c
renamed: lib/krb4.c -> lib/curl_krb4.c
renamed: lib/krb5.c -> lib/curl_krb5.c
renamed: lib/ldap.c -> lib/curl_ldap.c
renamed: lib/llist.c -> lib/curl_llist.c
renamed: lib/md4.c -> lib/curl_md4.c
renamed: lib/md5.c -> lib/curl_md5.c
renamed: lib/memdebug.c -> lib/curl_memdebug.c
renamed: lib/mprintf.c -> lib/curl_mprintf.c
renamed: lib/multi.c -> lib/curl_multi.c
renamed: lib/netrc.c -> lib/curl_netrc.c
renamed: lib/non-ascii.c -> lib/curl_non_ascii.c
renamed: lib/curl_non-ascii.h -> lib/curl_non_ascii.h
renamed: lib/nonblock.c -> lib/curl_nonblock.c
renamed: lib/nss.c -> lib/curl_nss.c
renamed: lib/nwlib.c -> lib/curl_nwlib.c
renamed: lib/nwos.c -> lib/curl_nwos.c
renamed: lib/openldap.c -> lib/curl_openldap.c
renamed: lib/parsedate.c -> lib/curl_parsedate.c
renamed: lib/pingpong.c -> lib/curl_pingpong.c
renamed: lib/polarssl.c -> lib/curl_polarssl.c
renamed: lib/pop3.c -> lib/curl_pop3.c
renamed: lib/progress.c -> lib/curl_progress.c
renamed: lib/qssl.c -> lib/curl_qssl.c
renamed: lib/rawstr.c -> lib/curl_rawstr.c
renamed: lib/rtsp.c -> lib/curl_rtsp.c
renamed: lib/security.c -> lib/curl_security.c
renamed: lib/select.c -> lib/curl_select.c
renamed: lib/sendf.c -> lib/curl_sendf.c
renamed: lib/share.c -> lib/curl_share.c
renamed: lib/slist.c -> lib/curl_slist.c
renamed: lib/smtp.c -> lib/curl_smtp.c
renamed: lib/socks.c -> lib/curl_socks.c
renamed: lib/socks_gssapi.c -> lib/curl_socks_gssapi.c
renamed: lib/socks_sspi.c -> lib/curl_socks_sspi.c
renamed: lib/speedcheck.c -> lib/curl_speedcheck.c
renamed: lib/splay.c -> lib/curl_splay.c
renamed: lib/ssh.c -> lib/curl_ssh.c
renamed: lib/sslgen.c -> lib/curl_sslgen.c
renamed: lib/ssluse.c -> lib/curl_ssluse.c
renamed: lib/strdup.c -> lib/curl_strdup.c
renamed: lib/strequal.c -> lib/curl_strequal.c
renamed: lib/strerror.c -> lib/curl_strerror.c
renamed: lib/strtok.c -> lib/curl_strtok.c
renamed: lib/strtoofft.c -> lib/curl_strtoofft.c
renamed: lib/telnet.c -> lib/curl_telnet.c
renamed: lib/tftp.c -> lib/curl_tftp.c
renamed: lib/timeval.c -> lib/curl_timeval.c
renamed: lib/transfer.c -> lib/curl_transfer.c
renamed: lib/url.c -> lib/curl_url.c
renamed: lib/version.c -> lib/curl_version.c
renamed: lib/warnless.c -> lib/curl_warnless.c
renamed: lib/wildcard.c -> lib/curl_wildcard.c
----------------------------------------
|
|
76 private header files renamed to use our standard naming scheme.
This change affects 322 files in libcurl's source tree.
|
|
Inclusion of top two most included header files now done in setup_once.h
|
|
A bundle is a list of all persistent connections to the same host.
The connection cache consists of a hash of bundles, with the
hostname as the key.
The benefits may not be obvious, but they are two:
1) Faster search for connections to reuse, since the hash
lookup only finds connections to the host in question.
2) It lays out the groundworks for an upcoming patch,
which will introduce multiple HTTP pipelines.
This patch also removes the awkward list of "closure handles",
which were needed to send QUIT commands to the FTP server
when closing a connection.
Now we allocate a separate closure handle and use that
one to close all connections.
This has been tested in a live system for a few weeks, and of
course passes the test suite.
|
