| Age | Commit message (Collapse) | Author |
|---|
|
It doesn't benefit us much as the connection could get closed at
any time, and also by checking we lose the ability to determine
if the socket was closed by reading zero bytes.
Reported-by: Michael Kaufmann
Closes https://github.com/curl/curl/pull/1134
|
|
Visual C++ now complains about implicitly casting time_t (64-bit) to
long (32-bit). Fix this by changing some variables from long to time_t,
or explicitly casting to long where the public interface would be
affected.
Closes #1131
|
|
CURLDEBUG is for the memory debugging
DEBUGBUILD is for the extra debug stuff
Pointed-out-by: Steve Holme
|
|
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes #941
|
|
|
|
|
|
|
|
For a single-stream download from localhost, we managed to increase
transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of
this single fix.
|
|
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
|
|
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
|
|
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
76 private header files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: amigaos.h -> curl_amigaos.h
renamed: arpa_telnet.h -> curl_arpa_telnet.h
renamed: asyn.h -> curl_asyn.h
renamed: axtls.h -> curl_axtls.h
renamed: bundles.h -> curl_bundles.h
renamed: conncache.h -> curl_conncache.h
renamed: connect.h -> curl_connect.h
renamed: content_encoding.h -> curl_content_encoding.h
renamed: cookie.h -> curl_cookie.h
renamed: cyassl.h -> curl_cyassl.h
renamed: dict.h -> curl_dict.h
renamed: easyif.h -> curl_easyif.h
renamed: escape.h -> curl_escape.h
renamed: file.h -> curl_file.h
renamed: fileinfo.h -> curl_fileinfo.h
renamed: formdata.h -> curl_formdata.h
renamed: ftp.h -> curl_ftp.h
renamed: ftplistparser.h -> curl_ftplistparser.h
renamed: getinfo.h -> curl_getinfo.h
renamed: gopher.h -> curl_gopher.h
renamed: gtls.h -> curl_gtls.h
renamed: hash.h -> curl_hash.h
renamed: hostcheck.h -> curl_hostcheck.h
renamed: hostip.h -> curl_hostip.h
renamed: http.h -> curl_http.h
renamed: http_chunks.h -> curl_http_chunks.h
renamed: http_digest.h -> curl_http_digest.h
renamed: http_negotiate.h -> curl_http_negotiate.h
renamed: http_proxy.h -> curl_http_proxy.h
renamed: if2ip.h -> curl_if2ip.h
renamed: imap.h -> curl_imap.h
renamed: inet_ntop.h -> curl_inet_ntop.h
renamed: inet_pton.h -> curl_inet_pton.h
renamed: krb4.h -> curl_krb4.h
renamed: llist.h -> curl_llist.h
renamed: memdebug.h -> curl_memdebug.h
renamed: multiif.h -> curl_multiif.h
renamed: netrc.h -> curl_netrc.h
renamed: non-ascii.h -> curl_non-ascii.h
renamed: nonblock.h -> curl_nonblock.h
renamed: nssg.h -> curl_nssg.h
renamed: parsedate.h -> curl_parsedate.h
renamed: pingpong.h -> curl_pingpong.h
renamed: polarssl.h -> curl_polarssl.h
renamed: pop3.h -> curl_pop3.h
renamed: progress.h -> curl_progress.h
renamed: qssl.h -> curl_qssl.h
renamed: rawstr.h -> curl_rawstr.h
renamed: rtsp.h -> curl_rtsp.h
renamed: select.h -> curl_select.h
renamed: sendf.h -> curl_sendf.h
renamed: setup.h -> curl_setup.h
renamed: setup_once.h -> curl_setup_once.h
renamed: share.h -> curl_share.h
renamed: slist.h -> curl_slist.h
renamed: smtp.h -> curl_smtp.h
renamed: sockaddr.h -> curl_sockaddr.h
renamed: socks.h -> curl_socks.h
renamed: speedcheck.h -> curl_speedcheck.h
renamed: splay.h -> curl_splay.h
renamed: ssh.h -> curl_ssh.h
renamed: sslgen.h -> curl_sslgen.h
renamed: ssluse.h -> curl_ssluse.h
renamed: strdup.h -> curl_strdup.h
renamed: strequal.h -> curl_strequal.h
renamed: strerror.h -> curl_strerror.h
renamed: strtok.h -> curl_strtok.h
renamed: strtoofft.h -> curl_strtoofft.h
renamed: telnet.h -> curl_telnet.h
renamed: tftp.h -> curl_tftp.h
renamed: timeval.h -> curl_timeval.h
renamed: transfer.h -> curl_transfer.h
renamed: url.h -> curl_url.h
renamed: urldata.h -> curl_urldata.h
renamed: warnless.h -> curl_warnless.h
renamed: wildcard.h -> curl_wildcard.h
----------------------------------------
|
|
76 private header files renamed to use our standard naming scheme.
This change affects 322 files in libcurl's source tree.
|
|
First off the timeout for accepting a server connect back must of course
respect a global timeout. Then the timeleft function is only used by ftp
code so it was moved to ftp.c and made static.
|
|
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
|
|
Moved out into a separate function to work as a "generic" socket()
replacement.
|
|
|
|
lwIP library initialization.
|
|
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
|
|
As the function doesn't really use the connectdata struct but only the
SessionHanadle struct I modified what argument it wants.
|
|
|
|
Curl_getconnectinfo() is changed to return a proper curl_socket_t for
the last socket so that it'll work more portably (and cause less
compiler warnings).
|
|
|
|
|
|
|
|
setting a file descriptor non-blocking. Used by the functionality Eric
himself brough on June 15th.
|
|
well. See change 28 Apr 2009.
|
|
problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL
pointer read. I also took the opportunity to clean up this logic (storing of
the connection's IP address) somewhat as we had it stored in two different
places and ways previously and they are now unified.
|
|
and receive data over a connection previously setup with curl_easy_perform()
and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to
show how they can be used.
|
|
them all use the same (hopefully correct) logic to make it less error-prone
and easier to introduce library-wide where it should be used.
|
|
|
|
|
|
(http://curl.haxx.se/bug/view.cgi?id=1481217), with follow-ups by Michele Bini
and David Byron. libcurl previously wrongly used GetLastError() on windows to
get error details after socket-related function calls, when it really should
use WSAGetLastError() instead.
When changing to this, the former function Curl_ourerrno() is now instead
called Curl_sockerrno() as it is necessary to only use it to get errno from
socket-related functions as otherwise it won't work as intended on Windows.
|
|
|
|
generic connect uses
|
|
|
|
linked list for name resolved data, even on hosts/systems with only IPv4
stacks as this simplifies a lot of code.
|
|
defines are in setup.h.
|
|
|
|
|
|
|
|
|
|
counter so that the caller needs to decrease that counter when done with
the returned data.
If compiled with MALLOCDEBUG I've added some extra checking that the counter
is decreased before a handle is closed etc.
|
|
|
|
the initial connect to "come through".
This should work fine for connect and for FTP-PASV connects. Needs massive
testing.
|
|
|
