| Age | Commit message (Collapse) | Author |
|---|
|
Prior to this change it was possible for libcurl to be built with both
Windows' native IDN lib (normaliz) and libidn2 enabled. It appears that
doesn't offer any benefit --and could cause a bug-- since libcurl's IDN
handling is written to use either one but not both.
Bug: https://github.com/curl/curl/issues/1441#issuecomment-297689856
Reported-by: Gisle Vanem
|
|
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
|
|
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes #1373
|
|
|
|
CVE-2016-8625
Bug: https://curl.haxx.se/docs/adv_20161102K.html
Reported-by: Christian Heimes
|
|
NTLM support with mbedTLS was added in 497e7c9 but requires that mbedTLS
is built with the MD4 functions available, which it isn't in default
builds. This now adapts if the funtion isn't there and builds libcurl
without NTLM support if so.
Fixes #1004
|
|
Closes #820
|
|
|
|
Use getaddrinfo() to resolve the IPv4 address literal on iOS/Mac OS X.
If the current network interface doesn’t support IPv4, but supports
IPv6, NAT64, and DNS64.
Closes #866
Fixes #863
|
|
WinSock destroys recv() buffer if send() is failed. As result - server
response may be lost if server sent it while curl is still sending
request. This behavior noticeable on HTTP server short replies if
libcurl use several send() for request (usually for POST request).
To workaround this problem, libcurl use recv() before every send() and
keeps received data in intermediate buffer for further processing.
Fixes: #657
Closes: #668
|
|
|
|
As of https://boringssl-review.googlesource.com/#/c/6980/, almost all of
BoringSSL #ifdefs in cURL should be unnecessary:
- BoringSSL provides no-op stubs for compatibility which replaces most
#ifdefs.
- DES_set_odd_parity has been in BoringSSL for nearly a year now. Remove
the compatibility codepath.
- With a small tweak to an extend_key_56_to_64 call, the NTLM code
builds fine.
- Switch OCSP-related #ifdefs to the more generally useful
OPENSSL_NO_OCSP.
The only #ifdefs which remain are Curl_ossl_version and the #undefs to
work around OpenSSL and wincrypt.h name conflicts. (BoringSSL leaves
that to the consumer. The in-header workaround makes things sensitive to
include order.)
This change errs on the side of removing conditionals despite many of
the restored codepaths being no-ops. (BoringSSL generally adds no-op
compatibility stubs when possible. OPENSSL_VERSION_NUMBER #ifdefs are
bad enough!)
Closes #640
|
|
Closes #632
|
|
|
|
The name of the header guard in lwIP's <lwip/opt.h> has changed from
'__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015).
Other fixes:
- In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is
used.
- In memdebug.h, the 'socket' should be undefined first due to lwIP's
lwip_socket() macro.
- In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need
special handling because they were undef'ed in memdebug.h.
- In select.c we can't use preprocessor conditionals inside select if
MSVC and select is a macro, as it is with lwIP.
http://curl.haxx.se/mail/lib-2015-12/0023.html
http://curl.haxx.se/mail/lib-2015-12/0024.html
|
|
Fixes warnings 78c25c854a added.
|
|
|
|
closes #496
|
|
Bug: https://github.com/bagder/curl/pull/411
Reported-by: Viktor Szakats
|
|
Bug: https://github.com/bagder/curl/pull/258#issuecomment-107915198
Reported-by: Gisle Vanem
|
|
- Change fopen calls to use FOPEN_READTEXT instead of "r" or "rt"
- Change fopen calls to use FOPEN_WRITETEXT instead of "w" or "wt"
This change is to explicitly specify when we need to read/write text.
Unfortunately 't' is not part of POSIX fopen so we can't specify it
directly. Instead we now have FOPEN_READTEXT, FOPEN_WRITETEXT.
Prior to this change we had an issue on Windows if an application that
uses libcurl overrides the default file mode to binary. The default file
mode in Windows is normally text mode (translation mode) and that's what
libcurl expects.
Bug: https://github.com/bagder/curl/pull/258#issuecomment-107093055
Reported-by: Orgad Shaneh
|
|
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
|
|
|
|
HAVE_BORINGSSL gets defined now by configure and should be defined by
other build systems in case a BoringSSL build is desired.
|
|
|
|
|
|
Allow the use of the Windows Crypt API for NTLMv1 functions.
|
|
|
|
|
|
For consistency renamed USE_KRB5 to USE_KERBEROS5.
|
|
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and
cryptography weren't disabled, and either a supporting cryptography
library or Windows SSPI was being compiled against.
This means it was not possible to build libcurl without HTTP support
and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather
than introduce a new SASL pre-processor definition, removed the HTTP
prerequisite just like USE_SPNEGO and USE_KRB5.
Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP
as it is only available to HTTP at present.
This bug dates back to August 2011 when I started to add support for
NTLM to SMTP.
|
|
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
|
|
|
|
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
|
|
|
|
It now disables NTLM and GSS authentication methods, and produces
compilable code when SSL is enabled.
|
|
Following commit 0aafd77fa4c6f2, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
|
|
|
|
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
|
|
|
|
|
|
This reverts commit 8ec2cb5544b86306b702484ea785b6b9596562ab.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
|
|
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in
WIN32 specific code, so tracking of these has not been extended for
other build targets. Without this fix, memory tracking system on
WIN32 builds, when using these functions, would provide misleading
results.
In order to properly extend this support for all targets curl.h
would have to define curl_wcsdup_callback prototype and consequently
wchar_t should be visible before that in curl.h. IOW curl_wchar_t
defined in curlbuild.h and this pulling whatever system header is
required to get wchar_t definition.
Additionally a new curl_global_init_mem() function that also receives
user defined wcsdup() callback would be required.
|
|
Commit 26eaa8383001 introduces the use of S_ISDIR() yet some compilers,
such as MSVC don't support it, so we must define a substitute using
file flags and mask.
|
|
- rename post-config-vms.h to setup-vms.h
- move its inclusion into proper location in curl_setup.h
|
|
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
|
|
76 private header files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: amigaos.h -> curl_amigaos.h
renamed: arpa_telnet.h -> curl_arpa_telnet.h
renamed: asyn.h -> curl_asyn.h
renamed: axtls.h -> curl_axtls.h
renamed: bundles.h -> curl_bundles.h
renamed: conncache.h -> curl_conncache.h
renamed: connect.h -> curl_connect.h
renamed: content_encoding.h -> curl_content_encoding.h
renamed: cookie.h -> curl_cookie.h
renamed: cyassl.h -> curl_cyassl.h
renamed: dict.h -> curl_dict.h
renamed: easyif.h -> curl_easyif.h
renamed: escape.h -> curl_escape.h
renamed: file.h -> curl_file.h
renamed: fileinfo.h -> curl_fileinfo.h
renamed: formdata.h -> curl_formdata.h
renamed: ftp.h -> curl_ftp.h
renamed: ftplistparser.h -> curl_ftplistparser.h
renamed: getinfo.h -> curl_getinfo.h
renamed: gopher.h -> curl_gopher.h
renamed: gtls.h -> curl_gtls.h
renamed: hash.h -> curl_hash.h
renamed: hostcheck.h -> curl_hostcheck.h
renamed: hostip.h -> curl_hostip.h
renamed: http.h -> curl_http.h
renamed: http_chunks.h -> curl_http_chunks.h
renamed: http_digest.h -> curl_http_digest.h
renamed: http_negotiate.h -> curl_http_negotiate.h
renamed: http_proxy.h -> curl_http_proxy.h
renamed: if2ip.h -> curl_if2ip.h
renamed: imap.h -> curl_imap.h
renamed: inet_ntop.h -> curl_inet_ntop.h
renamed: inet_pton.h -> curl_inet_pton.h
renamed: krb4.h -> curl_krb4.h
renamed: llist.h -> curl_llist.h
renamed: memdebug.h -> curl_memdebug.h
renamed: multiif.h -> curl_multiif.h
renamed: netrc.h -> curl_netrc.h
renamed: non-ascii.h -> curl_non-ascii.h
renamed: nonblock.h -> curl_nonblock.h
renamed: nssg.h -> curl_nssg.h
renamed: parsedate.h -> curl_parsedate.h
renamed: pingpong.h -> curl_pingpong.h
renamed: polarssl.h -> curl_polarssl.h
renamed: pop3.h -> curl_pop3.h
renamed: progress.h -> curl_progress.h
renamed: qssl.h -> curl_qssl.h
renamed: rawstr.h -> curl_rawstr.h
renamed: rtsp.h -> curl_rtsp.h
renamed: select.h -> curl_select.h
renamed: sendf.h -> curl_sendf.h
renamed: setup.h -> curl_setup.h
renamed: setup_once.h -> curl_setup_once.h
renamed: share.h -> curl_share.h
renamed: slist.h -> curl_slist.h
renamed: smtp.h -> curl_smtp.h
renamed: sockaddr.h -> curl_sockaddr.h
renamed: socks.h -> curl_socks.h
renamed: speedcheck.h -> curl_speedcheck.h
renamed: splay.h -> curl_splay.h
renamed: ssh.h -> curl_ssh.h
renamed: sslgen.h -> curl_sslgen.h
renamed: ssluse.h -> curl_ssluse.h
renamed: strdup.h -> curl_strdup.h
renamed: strequal.h -> curl_strequal.h
renamed: strerror.h -> curl_strerror.h
renamed: strtok.h -> curl_strtok.h
renamed: strtoofft.h -> curl_strtoofft.h
renamed: telnet.h -> curl_telnet.h
renamed: tftp.h -> curl_tftp.h
renamed: timeval.h -> curl_timeval.h
renamed: transfer.h -> curl_transfer.h
renamed: url.h -> curl_url.h
renamed: urldata.h -> curl_urldata.h
renamed: warnless.h -> curl_warnless.h
renamed: wildcard.h -> curl_wildcard.h
----------------------------------------
|
