aboutsummaryrefslogtreecommitdiff
path: root/lib/curl_setup.h
AgeCommit message (Collapse)Author
2015-06-01curl_setup: Add macros for FOPEN_READTEXT, FOPEN_WRITETEXTJay Satiro
- Change fopen calls to use FOPEN_READTEXT instead of "r" or "rt" - Change fopen calls to use FOPEN_WRITETEXT instead of "w" or "wt" This change is to explicitly specify when we need to read/write text. Unfortunately 't' is not part of POSIX fopen so we can't specify it directly. Instead we now have FOPEN_READTEXT, FOPEN_WRITETEXT. Prior to this change we had an issue on Windows if an application that uses libcurl overrides the default file mode to binary. The default file mode in Windows is normally text mode (translation mode) and that's what libcurl expects. Bug: https://github.com/bagder/curl/pull/258#issuecomment-107093055 Reported-by: Orgad Shaneh
2015-03-05openssl: remove all uses of USE_SSLEAYDaniel Stenberg
SSLeay was the name of the library that was subsequently turned into OpenSSL many moons ago (1999). curl does not work with the old SSLeay library since years. This is now reflected by only using USE_OPENSSL in code that depends on OpenSSL.
2015-01-26curl_setup: Disable SMB/CIFS support when HTTP onlyBrad Spencer
2015-01-22BoringSSL: fix build for non-configure buildsDaniel Stenberg
HAVE_BORINGSSL gets defined now by configure and should be defined by other build systems in case a BoringSSL build is desired.
2015-01-22BoringSSL: detected by configure, switches off NTLMDaniel Stenberg
2014-12-08compile: warn on unused return code from Curl_client_write()Daniel Stenberg
2014-12-07ntlm: Use Windows Crypt APIBill Nagel
Allow the use of the Windows Crypt API for NTLMv1 functions.
2014-12-05OS400: enable NTLM authenticationPatrick Monnerat
2014-12-03sasl_gssapi: Enable USE_KERBEROS5 for GSS-API based buildsSteve Holme
2014-11-16kerberos: Use symbol qualified with _KERBEROS5Michael Osipov
For consistency renamed USE_KRB5 to USE_KERBEROS5.
2014-11-09build: Fixed no NTLM support for email when CURL_DISABLE_HTTP is definedSteve Holme
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and cryptography weren't disabled, and either a supporting cryptography library or Windows SSPI was being compiled against. This means it was not possible to build libcurl without HTTP support and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather than introduce a new SASL pre-processor definition, removed the HTTP prerequisite just like USE_SPNEGO and USE_KRB5. Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP as it is only available to HTTP at present. This bug dates back to August 2011 when I started to add support for NTLM to SMTP.
2014-11-02sasl: Fixed Kerberos V5 inclusion when CURL_DISABLE_CRYPTO_AUTH is usedSteve Holme
Typically the USE_WINDOWS_SSPI definition would not be used when the CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication data structures and functions would incorrectly be used when they shouldn't be. Introduced a new USE_KRB5 definition that takes into account the use of CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
2014-10-13vtls: remove QsoSSLPatrick Monnerat
2014-07-23curl.h/features: Deprecate GSS-Negotiate macros due to bad namingMichael Osipov
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE - CURL_VERSION_GSSNEGOTIATE is deprecated which is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and CURUL_VERSION_SPNEGO now. - Remove display of feature 'GSS-Negotiate'
2014-07-14build: set _POSIX_PTHREAD_SEMANTICS on Solaris to get proper getpwuid_rDan Fandrich
2014-02-17configure: Fix the --disable-crypto-auth optionDan Fandrich
It now disables NTLM and GSS authentication methods, and produces compilable code when SSL is enabled.
2013-12-31mprintf: Replaced internal usage of FORMAT_OFF_T and FORMAT_OFF_TUSteve Holme
Following commit 0aafd77fa4c6f2, replaced the internal usage of FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we expect API programmers to use. This negates the need for separate definitions which were subtly different under different platforms/compilers.
2013-07-19WIN32 MemoryTracking: require UNICODE for wide strdup code supportYang Tse
2013-07-18Reinstate "WIN32 MemoryTracking: track wcsdup() _wcsdup() and _tcsdup() usage".Yang Tse
This reverts commit 7ed25cc, reinstating commit 8ec2cb5. As of 18-jul-2013 we still do have code in libcurl that makes use of these memory functions. Commit 8ec2cb5 comment still applies and is yet valid. These memory functions are solely used in Windows builds, so all related code is protected with '#ifdef WIN32' preprocessor conditional compilation directives. Specifically, wcsdup() _wcsdup() are used when building a Windows target with UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case when building a Windows UNICODE target with Windows native SSL/TLS support enabled. Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage of these is hidden behind _tcsdup() which is MS way of dealing with code that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS header files and those compatible from other compilers use this preprocessor conditional compilation directive in order to select at compilation time whether 'wide' or 'ansi' MS API functions are used. Without this code, Windows build targets with Windows native SSL/TLS support enabled and MemoryTracking support enabled misbehave in tracking memory usage, regardless of being a UNICODE enabled build or not.
2013-07-15OS400: new SSL backend GSKitPatrick Monnerat
2013-06-02curl_setup.h: Fixed redefinition warning using mingw-w64Marc Hoersken
2013-05-12Revert "WIN32 MemoryTracking: track wcsdup() _wcsdup() and _tcsdup() usage"Daniel Stenberg
This reverts commit 8ec2cb5544b86306b702484ea785b6b9596562ab. We don't have any code anywhere in libcurl (or the curl tool) that use wcsdup so there's no such memory use to track. It seems to cause mild problems with the Borland compiler though that we may avoid by reverting this change again. Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
2013-03-25WIN32 MemoryTracking: track wcsdup() _wcsdup() and _tcsdup() usageYang Tse
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in WIN32 specific code, so tracking of these has not been extended for other build targets. Without this fix, memory tracking system on WIN32 builds, when using these functions, would provide misleading results. In order to properly extend this support for all targets curl.h would have to define curl_wcsdup_callback prototype and consequently wchar_t should be visible before that in curl.h. IOW curl_wchar_t defined in curlbuild.h and this pulling whatever system header is required to get wchar_t definition. Additionally a new curl_global_init_mem() function that also receives user defined wcsdup() callback would be required.
2013-03-05curl_setup.h: Added S_IRDIR() macro for compilers that don't support itSteve Holme
Commit 26eaa8383001 introduces the use of S_ISDIR() yet some compilers, such as MSVC don't support it, so we must define a substitute using file flags and mask.
2013-02-06setup-vms.h: post VMS patch cleanup - IIIYang Tse
- rename post-config-vms.h to setup-vms.h - move its inclusion into proper location in curl_setup.h
2013-02-05VMS: fix and generate the VMS build configJohn E. Malmberg
config_h.com is a new file that generates a config.h file based on the curl_config.h.in file and a quick scan of the configure script. This is actually a generic procedure that is shared with other VMS packages. The existing pre-built config-vms.h had over 100 entries that were not correct and in some cases conflicted with the build options available in the build_vms.com. generate_config_vms_h_curl.com is a helper procedure to the config_h.com. It covers the cases that the generic config_h.com is not able to figure out, and accepts input from the build_vms.com procedure. build_curlbuild_h.com is a new file to generate the curlbuild.h file that Curl is now using when it is using a curl_config.h file. post-config-vms.h is a new file that is needed to provide VMS specific definitions, and most of them need to be set before the system header files are included. The VMS build procedure is fixed: 1. Fixed to link in the correct HP ssl library. 2. Fixed to detect if HP Kerberos is installed. 3. Fixed to detect if HP LDAP is installed. 4. Fixed to detect if gnv$libzshr is installed. 5. Simplified the input parameter parsing to not use a loop. 6. Warn that 64 bit pointer option support is not complete in comments. 7. Default to IEEE floating if platform supports it so resulting libcurl will be compatible with other open source projects on VMS. 8. Default to LARGEFILE if platform supports it. 9. Default to enable SSL, LDAP, Kerberos, libz if the libraries are present. 10. Build with exact case global symbols for libcurl. 11. Generate linker option file needed. 12. Compiler list option only commonly needed items. 13. fulllist option for those who really want it. 14. Create debug symbol file on Alpha, IA64.
2013-01-09build: fix circular header inclusion with other packagesYang Tse
This commit renames lib/setup.h to lib/curl_setup.h and renames lib/setup_once.h to lib/curl_setup_once.h. Removes the need and usage of a header inclusion guard foreign to libcurl. [1] Removes the need and presence of an alarming notice we carried in old setup_once.h [2] ---------------------------------------- 1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H, this single inclusion guard is enough to ensure that inclusion of lib/setup_once.h done from lib/setup.h is only done once. Additionally lib/setup.h has always used __SETUP_ONCE_H macro to protect inclusion of setup_once.h even after commit ec691ca3, this was to avoid a circular header inclusion triggered when building a c-ares enabled version with c-ares sources available which also has a setup_once.h header. Commit ec691ca3 exposes the real nature of __SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard foreign to libcurl belonging to c-ares's setup_once.h The renaming this commit does, fixes the circular header inclusion, and as such removes the need and usage of a header inclusion guard foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl. 2 - Due to the circular interdependency of old lib/setup_once.h and the c-ares setup_once.h header, old file lib/setup_once.h has carried back from 2006 up to now days an alarming and prominent notice about the need of keeping libcurl's and c-ares's setup_once.h in sync. Given that this commit fixes the circular interdependency, the need and presence of mentioned notice is removed. All mentioned interdependencies come back from now old days when the c-ares project lived inside a curl subdirectory. This commit removes last traces of such fact.
2013-01-06Revert changes relative to lib/*.[ch] recent renamingYang Tse
This reverts renaming and usage of lib/*.h header files done 28-12-2012, reverting 2 commits: f871de0... build: make use of 76 lib/*.h renamed files ffd8e12... build: rename 76 lib/*.h files This also reverts removal of redundant include guard (redundant thanks to changes in above commits) done 2-12-2013, reverting 1 commit: c087374... curl_setup.h: remove redundant include guard This also reverts renaming and usage of lib/*.c source files done 3-12-2013, reverting 3 commits: 13606bb... build: make use of 93 lib/*.c renamed files 5b6e792... build: rename 93 lib/*.c files 7d83dff... build: commit 13606bbfde follow-up 1 Start of related discussion thread: http://curl.haxx.se/mail/lib-2013-01/0012.html Asking for confirmation on pushing this revertion commit: http://curl.haxx.se/mail/lib-2013-01/0048.html Confirmation summary: http://curl.haxx.se/mail/lib-2013-01/0079.html NOTICE: The list of 2 files that have been modified by other intermixed commits, while renamed, and also by at least one of the 6 commits this one reverts follows below. These 2 files will exhibit a hole in history unless git's '--follow' option is used when viewing logs. lib/curl_imap.h lib/curl_smtp.h
2013-01-02curl_setup.h: remove redundant include guardYang Tse
2012-12-28build: rename 76 lib/*.h filesYang Tse
76 private header files renamed to use our standard naming scheme. This commit only does the file renaming. ---------------------------------------- renamed: amigaos.h -> curl_amigaos.h renamed: arpa_telnet.h -> curl_arpa_telnet.h renamed: asyn.h -> curl_asyn.h renamed: axtls.h -> curl_axtls.h renamed: bundles.h -> curl_bundles.h renamed: conncache.h -> curl_conncache.h renamed: connect.h -> curl_connect.h renamed: content_encoding.h -> curl_content_encoding.h renamed: cookie.h -> curl_cookie.h renamed: cyassl.h -> curl_cyassl.h renamed: dict.h -> curl_dict.h renamed: easyif.h -> curl_easyif.h renamed: escape.h -> curl_escape.h renamed: file.h -> curl_file.h renamed: fileinfo.h -> curl_fileinfo.h renamed: formdata.h -> curl_formdata.h renamed: ftp.h -> curl_ftp.h renamed: ftplistparser.h -> curl_ftplistparser.h renamed: getinfo.h -> curl_getinfo.h renamed: gopher.h -> curl_gopher.h renamed: gtls.h -> curl_gtls.h renamed: hash.h -> curl_hash.h renamed: hostcheck.h -> curl_hostcheck.h renamed: hostip.h -> curl_hostip.h renamed: http.h -> curl_http.h renamed: http_chunks.h -> curl_http_chunks.h renamed: http_digest.h -> curl_http_digest.h renamed: http_negotiate.h -> curl_http_negotiate.h renamed: http_proxy.h -> curl_http_proxy.h renamed: if2ip.h -> curl_if2ip.h renamed: imap.h -> curl_imap.h renamed: inet_ntop.h -> curl_inet_ntop.h renamed: inet_pton.h -> curl_inet_pton.h renamed: krb4.h -> curl_krb4.h renamed: llist.h -> curl_llist.h renamed: memdebug.h -> curl_memdebug.h renamed: multiif.h -> curl_multiif.h renamed: netrc.h -> curl_netrc.h renamed: non-ascii.h -> curl_non-ascii.h renamed: nonblock.h -> curl_nonblock.h renamed: nssg.h -> curl_nssg.h renamed: parsedate.h -> curl_parsedate.h renamed: pingpong.h -> curl_pingpong.h renamed: polarssl.h -> curl_polarssl.h renamed: pop3.h -> curl_pop3.h renamed: progress.h -> curl_progress.h renamed: qssl.h -> curl_qssl.h renamed: rawstr.h -> curl_rawstr.h renamed: rtsp.h -> curl_rtsp.h renamed: select.h -> curl_select.h renamed: sendf.h -> curl_sendf.h renamed: setup.h -> curl_setup.h renamed: setup_once.h -> curl_setup_once.h renamed: share.h -> curl_share.h renamed: slist.h -> curl_slist.h renamed: smtp.h -> curl_smtp.h renamed: sockaddr.h -> curl_sockaddr.h renamed: socks.h -> curl_socks.h renamed: speedcheck.h -> curl_speedcheck.h renamed: splay.h -> curl_splay.h renamed: ssh.h -> curl_ssh.h renamed: sslgen.h -> curl_sslgen.h renamed: ssluse.h -> curl_ssluse.h renamed: strdup.h -> curl_strdup.h renamed: strequal.h -> curl_strequal.h renamed: strerror.h -> curl_strerror.h renamed: strtok.h -> curl_strtok.h renamed: strtoofft.h -> curl_strtoofft.h renamed: telnet.h -> curl_telnet.h renamed: tftp.h -> curl_tftp.h renamed: timeval.h -> curl_timeval.h renamed: transfer.h -> curl_transfer.h renamed: url.h -> curl_url.h renamed: urldata.h -> curl_urldata.h renamed: warnless.h -> curl_warnless.h renamed: wildcard.h -> curl_wildcard.h ----------------------------------------