aboutsummaryrefslogtreecommitdiff
path: root/lib/easy.c
AgeCommit message (Collapse)Author
2017-03-13Improve code readbilitySylvestre Ledru
... by removing the else branch after a return, break or continue. Closes #1310
2017-03-11curl_easy_reset: Also reset the authentication stateMichael Kaufmann
Follow-up to 5278462 See https://github.com/curl/curl/issues/1095
2017-01-19CURLOPT_BUFFERSIZE: support enlarging receive bufferRichy Kim
Replace use of fixed macro BUFSIZE to define the size of the receive buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive buffer size. Upon setting, resize buffer if larger than the current default size up to a MAX_BUFSIZE (512KB). This can benefit protocols like SFTP. Closes #1222
2016-11-05easy: Initialize info variables on easy init and duphandleJay Satiro
- Call Curl_initinfo on init and duphandle. Prior to this change the statistical and informational variables were simply zeroed by calloc on easy init and duphandle. While zero is the correct default value for almost all info variables, there is one where it isn't (filetime initializes to -1). Bug: https://github.com/curl/curl/issues/1103 Reported-by: Neal Poole
2016-10-31strcasecompare: is the new name for strequal()Daniel Stenberg
... to make it less likely that we forget that the function actually does case insentive compares. Also replaced several invokes of the function with a plain strcmp when case sensitivity is not an issue (like comparing with "-").
2016-10-31idn: switch to libidn2 use and IDNA2008 supportDaniel Stenberg
CVE-2016-8625 Bug: https://curl.haxx.se/docs/adv_20161102K.html Reported-by: Christian Heimes
2016-10-18s/cURL/curlDaniel Stenberg
The tool was never called cURL, only the project. But even so, we have more and more over time switched to just use lower case.
2016-09-20easy: Reset all statistical session info in curl_easy_resetJay Satiro
Bug: https://github.com/curl/curl/issues/1017 Reported-by: Jeroen Ooms
2016-08-04multi: make Curl_expire() work with 0 ms timeoutsDaniel Stenberg
Previously, passing a timeout of zero to Curl_expire() was a magic code for clearing all timeouts for the handle. That is now instead made with the new Curl_expire_clear() function and thus a 0 timeout is fine to set and will trigger a timeout ASAP. This will help removing short delays, in particular notable when doing HTTP/2.
2016-07-18curl_global_init: Check if IPv6 worksBrian Prodoehl
- Curl_ipv6works() is not thread-safe until after the first call, so call it once during global init to avoid a possible race condition. Bug: https://github.com/curl/curl/issues/915 PR: https://github.com/curl/curl/pull/918
2016-06-22typedefs: use the full structs in internal code...Daniel Stenberg
... and save the typedef'ed names for headers and external APIs.
2016-06-22internals: rename the SessionHandle struct to Curl_easyDaniel Stenberg
2016-04-29lib: include curl_printf.h as one of the last headersDaniel Stenberg
curl_printf.h defines printf to curl_mprintf, etc. This can cause problems with external headers which may use __attribute__((format(printf, ...))) markers etc. To avoid that they cause problems with system includes, we include curl_printf.h after any system headers. That makes the three last headers to always be, and we keep them in this order: curl_printf.h curl_memory.h memdebug.h None of them include system headers, they all do funny #defines. Reported-by: David Benjamin Fixes #743
2016-04-03code: style updatesDaniel Stenberg
2016-03-19easy: Minor coding standard and style updatesSteve Holme
Following commit c5744340db. Additionally removes the need for a second 'result code' variable as well.
2016-03-19easy: Remove poll failure check in easy_transferJay Satiro
.. because curl_multi_wait can no longer signal poll failure. follow-up to 77e1726 Bug: https://github.com/curl/curl/issues/707
2016-03-17version: init moved to private name space, added protosDaniel Stenberg
follow-up to 80015cdd52145
2016-03-16version: thread safetyJay Satiro
2016-03-16easy: Removed redundant HTTP authentication include filesSteve Holme
2016-03-14easy: add check to malloc() when running event-basedDaniel Stenberg
... to allow torture tests then too.
2016-02-03URLs: change all http:// URLs to https://Daniel Stenberg
2015-11-24Revert "cleanup: general removal of TODO (and similar) comments"Daniel Stenberg
This reverts commit 64e959ffe37c436503f9fed1ce2d6ee6ae50bd9a. Feedback-by: Dan Fandrich URL: http://curl.haxx.se/mail/lib-2015-11/0062.html
2015-11-13cleanup: general removal of TODO (and similar) commentsDaniel Stenberg
They tend to never get updated anyway so they're frequently inaccurate and we never go back to revisit them anyway. We document issues to work on properly in KNOWN_BUGS and TODO instead.
2015-10-09curl_global_init: set the memory function pointers correctDaniel Stenberg
follow-up from 6f8ecea0
2015-10-09curl_global_init_mem: set function pointers before doing initDaniel Stenberg
... as in the polarssl TLS backend for example it uses memory functions.
2015-03-24curl_memory: make curl_memory.h the second-last header file loadedDan Fandrich
This header file must be included after all header files except memdebug.h, as it does similar memory function redefinitions and can be similarly affected by conflicting definitions in system or dependent library headers.
2015-03-03mprintf.h: remove #ifdef CURLDEBUGDaniel Stenberg
... and as a consequence, introduce curl_printf.h with that re-define magic instead and make all libcurl code use that instead.
2014-12-09Curl_client_write() & al.: chop long data, convert data only once.Patrick Monnerat
2014-11-16easy.c: Fixed compilation warning when no verbose string supportSteve Holme
warning: unused parameter 'easy'
2014-11-09libssh2: detect features based on version, not configure checksDaniel Stenberg
... so that non-configure builds get the correct functions too based on the libssh2 version used.
2014-10-24code cleanup: we prefer 'CURLcode result'Daniel Stenberg
... for the local variable name in functions holding the return code. Using the same name universally makes code easier to read and follow. Also, unify code for checking for CURLcode errors with: if(result) or if(!result) instead of if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
2014-10-02wait_or_timeout: return failure when Curl_poll() failsDaniel Stenberg
Coverity detected this. CID 1241954. When Curl_poll() returns a negative value 'mcode' was uninitialized. Pretty harmless since this is debug code only and would at worst cause an error to _not_ be returned...
2014-07-05compiler warnings: potentially uninitialized variablesMarcel Raad
... pointed out by MSVC2013 Bug: http://curl.haxx.se/bug/view.cgi?id=1391
2014-05-03easy_perform: spelling mistake in error messageDaniel Stenberg
2014-04-22curl_global_init_mem: bump initialized even if already initializedDaniel Stenberg
As this makes curl_global_init_mem() behave the same way as curl_global_init() already does in that aspect - the same number of curl_global_cleanup() calls is then required to again decrease the counter and then eventually do the cleanup. Bug: http://curl.haxx.se/bug/view.cgi?id=1362 Reported-by: Tristan
2014-02-22easy: Fixed a memory leak on OOM conditionDan Fandrich
2013-12-20vtls: renamed sslgen.[ch] to vtls.[ch]Daniel Stenberg
2013-12-20vtls: created subdir, moved sslgen.[ch] there, updated all include linesDaniel Stenberg
2013-11-27sigpipe: factor out sigpipe_reset from easy.cJeff King
Commit 7d80ed64e43515 introduced some helpers to handle sigpipe in easy.c. However, that fix was incomplete, and we need to add more callers in other files. The first step is making the helpers globally accessible. Since the functions are small and should generally end up inlined anyway, we simply define them in the header as static functions. Signed-off-by: Jeff King <peff@peff.net>
2013-09-01easy.c: Fixed compilation warningSteve Holme
warning: `code' might be used uninitialized in this function
2013-08-29easy: rename struct monitor to socketmonitorDaniel Stenberg
'struct monitor', introduced in 6cf8413e, already exists in an IRIX header file (sys/mon.h) which gets included via various standard headers by lib/easy.c cc-1101 cc: ERROR File = ../../curl/lib/easy.c, Line = 458 "monitor" has already been declared in the current scope. Reported-by: Tor Arntsen
2013-08-28multi_socket: improved 100-continue timeout handlingDaniel Stenberg
When waiting for a 100-continue response from the server, the Curl_readwrite() will refuse to run if called until the timeout has been reached. We timeout code in multi_socket() allows code to run slightly before the actual timeout time, so for test 154 it could lead to the function being executed but refused in Curl_readwrite() and then the application would just sit idling forever. This was detected with runtests.pl -e on test 154.
2013-08-25easy: define away easy_events() for non-debug buildsDaniel Stenberg
2013-08-20curl_easy_perform_ev: debug/test functionDaniel Stenberg
This function is meant to work *exactly* as curl_easy_perform() but will use the event-based libcurl API internally instead of curl_multi_perform(). To avoid relying on an actual event-based library and to not use non-portable functions (like epoll or similar), there's a rather inefficient emulation layer implemented on top of Curl_poll() instead. There's currently some convenience logging done in curl_easy_perform_ev which helps when tracking down problems. They may be suitable to remove or change once things seem to be fine enough. curl has a new --test-event option when built with debug enabled that then uses curl_easy_perform_ev() instead of curl_easy_perform(). If built without debug, using --test-event will only output a warning message. NOTE: curl_easy_perform_ev() is not part if the public API on purpose. It is only present in debug builds of libcurl and MUST NOT be considered stable even then. Use it for libcurl-testing purposes only. runtests.pl now features an -e command line option that makes it use --test-event for all curl command line tests. The man page is updated.
2013-08-12cleanup: removed one function, made one staticDaniel Stenberg
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to easy_addmulti and made it static. Removed Curl_easy_initHandleData() and uses of it since it was emptied in commit cdda92ab67b47d74a.
2013-08-12SessionHandle: the protocol specific pointer is now a void *Daniel Stenberg
All protocol handler structs are now opaque (void *) in the SessionHandle struct and moved in the request-specific sub-struct 'SingleRequest'. The intension is to keep the protocol specific knowledge in their own dedicated source files [protocol].c etc. There's some "leakage" where this policy is violated, to be addressed at a later point in time.
2013-08-12urldata: clean up the use of the protocol specific structsDaniel Stenberg
1 - always allocate the struct in protocol->setup_connection. Some protocol handlers had to get this function added. 2 - always free at the end of a request. This is also an attempt to keep less memory in the handle after it is completed.
2013-08-03multi: remove data->state.current_conn struct fieldDaniel Stenberg
Not needed
2013-07-29curl_easy_pause: on unpause, trigger mulit-socket handlingDaniel Stenberg
When the multi-socket API is used, we need the handle to be checked again when it gets unpaused. Bug: http://curl.haxx.se/mail/lib-2013-07/0239.html Reported-by: Justin Karneges
2013-07-24easy.c: curl_easy_getinfo() fix va_start/va_end matchingYang Tse