| Age | Commit message (Collapse) | Author |
|---|
|
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
|
|
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
|
|
... and as a consequence, introduce curl_printf.h with that re-define
magic instead and make all libcurl code use that instead.
|
|
|
|
... instead of trying PASV, since PASV can't work with IPv6.
Reported-by: Vojtěch Král
|
|
... and make sure we can connect the data connection to a host name that
is longer than 48 bytes.
Also simplifies the code somewhat by re-using the original host name
more, as it is likely still in the DNS cache.
Original-Patch-by: Vojtěch Král
Bug: http://curl.haxx.se/bug/view.cgi?id=1468
|
|
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
|
|
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
|
|
ftp.c:819: warning: unused parameter 'lineno'
|
|
ftp.c:1827 warning: unused parameter 'newhost'
ftp.c:1827 warning: unused parameter 'newport'
|
|
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
|
|
Coverity pointed out several of these.
|
|
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
|
|
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
|
|
When doing passive FTP, the multi state function needs to extract and
use the happy eyeballs sockets to wait for to check for completion!
Bug: http://curl.haxx.se/mail/lib-2014-02/0135.html (ruined)
Reported-by: Alan
|
|
Following commit 0aafd77fa4c6f2, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
|
|
|
|
|
|
The temporary sockets used for Happy Eyeballs were not closed properly,
if curl exited prematurely, which this patch fixes.
|
|
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
|
|
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
|
|
warning: 'result' may be used uninitialized in this function
|
|
This is a regression since the switch to always-multi internally
c43127414d89c.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
|
|
There is an implicit conversion from "unsigned long" to "long"
|
|
... when doing upload it would return the wrong values at times. This
commit attempts to cleanup the mess.
Bug: http://curl.haxx.se/mail/lib-2013-08/0109.html
Reported-by: Mike Mio
|
|
I brought back security.h in commit bb5529331334e. As we actually
already found out back in 2005 in commit 62970da675249, the file name
security.h causes problems so I renamed it curl_sec.h instead.
|
|
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
|
|
... just to make them easier to print in debug ouputs while debugging.
They are still within #ifdef [debugbuild].
|
|
This makes the socket callback get called with the proper bitmask as
otherwise the application could be left hanging waiting for reading on
an upload connection!
Bug: http://curl.haxx.se/mail/lib-2013-08/0043.html
Reported-by: Bill Doyle
|
|
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
|
|
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
|
|
|
|
The previous naming scheme ftp_state_post_XXXX() wasn't really helpful
as it wasn't always immediately after 'xxxx' and it wasn't easy to
understand what it does based on such a name.
This new one is instead ftp_state_yyyy() where yyyy describes what it
does or sends.
|
|
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
|
|
|
|
|
|
In the case of an active connection when ftp_do_more() detects that the
server has connected back, it must make sure to mark it as complete so
that the multi_runsingle() function will detect this and move on to the
next state.
Bug: http://curl.haxx.se/mail/lib-2013-07/0115.html
Reported-by: Clemens Gruber
|
|
When connecting back to an FTP server after having sent PASV/EPSV,
libcurl sometimes didn't use the proxy properly even though the proxy
was used for the initial connect.
The function wrongly checked for the CURLOPT_PROXY variable to be set,
which made it act wrongly if the proxy information was set with an
environment variable.
Added test case 711 to verify (based on 707 which uses --socks5). Also
added test712 to verify another variation of setting the proxy: with
--proxy socks5://
Bug: http://curl.haxx.se/bug/view.cgi?id=1218
Reported-by: Zekun Ni
|
|
...instead of the 220 we otherwise expect.
Made the ftpserver.pl support sending a custom "welcome" and then
created test 1219 to verify this fix with such a 230 welcome.
Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html
Reported by: Anders Havn
|
|
Accessing a file with an absolute path in the root dir but with no
directory specified was not handled correctly. This fix comes with four
new test cases that verify it.
Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html
Reported by: Sam Deane
|
|
When doing PWD, there's a 257 response which apparently some servers
prefix with a comment before the path instead of after it as is
otherwise the norm.
Failing to parse this, several otherwise legitimate use cases break.
Bug: http://curl.haxx.se/mail/lib-2013-04/0113.html
|
|
|
|
When doing PORT and upload (STOR), this function needs to extract the
file descriptor for both connections so that it will respond immediately
when the server eventually connects back.
This flaw caused active connections to become unnecessary slow but they
would still often work due to the normal polling on a timeout. The bug
also would not occur if the server connected back very fast, like when
testing on local networks.
Bug: http://curl.haxx.se/bug/view.cgi?id=1183
Reported by: Daniel Theron
|
|
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
|
|
The last remaining code piece that still used FTPSENDF now uses PPSENDF.
In the problematic case, a PREQUOTE series was done on a re-used
connection when Curl_pp_init() hadn't been called so it had messed up
pointers. The init call is done properly from Curl_pp_sendf() so this
change fixes this particular crash.
Bug: http://curl.haxx.se/mail/lib-2013-03/0319.html
Reported by: Sam Deane
|
|
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
|
|
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
|
|
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
|
