| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
remain in use as internal curl_off_t print formatting strings for the internal
*printf functions which still cannot handle print formatting string directives
such as "I64d", "I64u", and others available on MSVC, MinGW, Intel's ICC, and
other DOS/Windows compilers.
This reverts previous commit part which did:
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
|
|
the names of the curl_off_t formatting string directives now become
CURL_FORMAT_CURL_OFF_T and CURL_FORMAT_CURL_OFF_TU.
CURL_FMT_OFF_T -> CURL_FORMAT_CURL_OFF_T
CURL_FMT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
Remove the use of an internal name for the curl_off_t formatting string directives
and use the common one available from the inside and outside of the library.
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
|
|
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
|
|
|
|
connection with the multi interface even if a previous use of it caused a
CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed
SSL connections properly close the connections.
|
|
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
|
|
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
|
|
|
|
response codes. Previously libcurl would hang on such occurances. I added
test case 1033 to verify.
|
|
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
|
|
handler functions didn't return that the socket should be waited for writing,
but instead it was treated as if no socket was needing monitoring so REMOVE
was called prematurely
|
|
that closes the connection somewhat faster when perhapsrewind() has marked
the connection for closure.
|
|
|
|
|
|
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
|
|
the progress callback for the first (potentially huge) piece of body data
sent together with the POST request headers in the initial send().
|
|
a re-used connection where both requests used Negotiate.
|
|
|
|
|
|
premature set TRUE, which means it was done before the request comleted. It
could then very well not have received any data.
|
|
http request and then you'd reuse the handle and replace the Accept: header,
as then libcurl would send two Accept: headers!
|
|
the SingleRequest one to make pipelining better. It is a bit tricky to keep
them in the right place, to keep things related to the actual request or to
the actual connection in the right place.
|
|
(http://curl.haxx.se/bug/view.cgi?id=1879375) which describes how libcurl
got lost in this scenario: proxy tunnel (or HTTPS over proxy), ask to do any
proxy authentication and the proxy replies with an auth (like NTLM) and then
closes the connection after that initial informational response.
libcurl would not properly re-initialize the connection to the proxy and
continue the auth negotiation like supposed. It does now however, as it will
now detect if one or more authentication methods were available and asked
for, and will thus retry the connection and continue from there.
- I made the progress callback get called properly during proxy CONNECT.
|
|
did "SESS". Fixed now.
|
|
(http://curl.haxx.se/bug/view.cgi?id=1871269) and we could fix his hang-
problem that occurred when doing a large HTTP POST request with the
response-body read from a callback.
|
|
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
|
|
(http://curl.haxx.se/bug/view.cgi?id=1849764) with an included fix. He
identified a problem for re-used connections that previously had sent
Expect: 100-continue and in some situations the subsequent POST (that didn't
use Expect:) still had the internal flag set for its use. David's fix (that
makes the setting of the flag in every single request unconditionally) is
fine and is now used!
|
|
use that prefix as we use that prefix only for library-wide internal global
symbols.
|
|
callback) over a proxy when NTLM is used as auth with the proxy. The bug
also concerned Digest and was limited to using callback only. Spacen worked
with us to provide a useful patch. I added the test case 547 and 548 to
verify two variations of POST over proxy with NTLM.
|
|
the appending of the "type=" thing on FTP URLs when they are passed to a
HTTP proxy. Some proxies just don't like that appending (which is done
unconditionally in 7.17.1), and some proxies treat binary/ascii transfers
better with the appending done!
|
|
is inited at the start of the DO action. I removed the Curl_transfer_keeper
struct completely, and I had to move out a few struct members (that had to
be set before DO or used after DONE) to the UrlState struct. The SingleRequest
struct is accessed with SessionHandle->req.
One of the biggest reasons for doing this was the bunch of duplicate struct
members in HandleData and Curl_transfer_keeper since it was really messy to
keep track of two variables with the same name and basically the same purpose!
|
|
|
|
|
|
callback was used, as it could wrongly pass on a bad size for the outgoing
HTTP header. The bad size would be a very large value as it was a wrapped
size_t content. This happened when the whole HTTP request failed to get sent
in one single send. http://curl.haxx.se/mail/lib-2007-11/0165.html
|
|
#ifdef CURL_DOES_CONVERSIONS anyway! I turned it into a DEBUGASSERT() instead.
|
|
huge send buffer sizes
|
|
consistency
|
|
|
|
https://bugzilla.novell.com/show_bug.cgi?id=332917 about a HTTP redirect to
FTP that caused memory havoc. His work together with my efforts created two
fixes:
#1 - FTP::file was moved to struct ftp_conn, because is has to be dealt with
at connection cleanup, at which time the struct HandleData could be
used by another connection.
Also, the unused char *urlpath member is removed from struct FTP.
#2 - provide a Curl_reset_reqproto() function that frees
data->reqdata.proto.* on connection setup if needed (that is if the
SessionHandle was used by a different connection).
|
|
when assigning a NULL pointer to a function pointer var.
|
|
CURLOPT_COPYPOSTFIELDS option added for dynamic.
Fix some OS400 features.
|
|
|
|
in the connectdata structure by a single handler table ptr.
|
|
a response that was larger than 16KB is now improved slightly so that now
the restriction at 16KB is for the headers only and it should be a rare
situation where the response-headers exceed 16KB. Thus, I consider #47 fixed
and the header limitation is now known as known bug #48.
|
|
Added test case 1008 to verify. Note that #47 is still there.
|
|
the --proxy-negotiate command line option to allow a user to explicitly
select it.
|
|
proxies for FTP urls.
|
|
|
