Age | Commit message (Collapse) | Author |
|
|
|
Closes #4200
|
|
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes #4199
|
|
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes #4197
|
|
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
|
|
- enable debug log
- fix use of quiche API
- use download buffer
- separate header/body
Closes #4193
|
|
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes #4169
|
|
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes #4138
|
|
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes #3500
|
|
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes #4103
Closes #4109
|
|
There were a leftover few prototypes of Curl_ functions that we used to
export but no longer do, this removes those prototypes and cleans up any
comments still referring to them.
Curl_write32_le(), Curl_strcpy_url(), Curl_strlen_url(), Curl_up_free()
Curl_concat_url(), Curl_detach_connnection(), Curl_http_setup_conn()
were made static in 05b100aee247bb9bec8e9a1b0166496aa4248d1c.
Curl_http_perhapsrewind() made static in 574aecee208f79d391f10d57520b3.
For the remainder, I didn't trawl the Git logs hard enough to capture
their exact time of deletion, but they were all gone: Curl_splayprint(),
Curl_http2_send_request(), Curl_global_host_cache_dtor(),
Curl_scan_cache_used(), Curl_hostcache_destroy(), Curl_second_connect(),
Curl_http_auth_stage() and Curl_close_connections().
Closes #4096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
The header buffer size calculation can from static analysis seem to
overlow as it performs an addition between two size_t variables and
stores the result in a size_t variable. Overflow is however guarded
against elsewhere since the input to the addition is regulated by
the maximum read buffer size. Clarify this with a comment since the
question was asked.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
To make sure a HTTP/2 stream registers the end of stream.
Bug #4043 made me find this problem but this fix doesn't correct the
reported issue.
Closes #4068
|
|
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes #3702
Fixes #3968
Closes #3977
|
|
|
|
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876
Closes #3883
|
|
This brings the code inline with the other HTTP authentication mechanisms.
Closes #3890
|
|
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
Closes #3882
|
|
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
|
|
|
|
|
|
|
|
|
|
- Do not switch to HTTP/2 for an HTTP proxy that is not tunnelling to
the destination host.
We already do something similar for HTTPS proxies by not sending h2. [1]
Prior to this change setting CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE would
incorrectly use HTTP/2 to talk to the proxy, which is not something we
support (yet?). Also it's debatable whether or not that setting should
apply to HTTP/2 proxies.
[1]: https://github.com/curl/curl/commit/17c5d05
Bug: https://github.com/curl/curl/issues/3570
Bug: https://github.com/curl/curl/issues/3832
Closes https://github.com/curl/curl/pull/3853
|
|
Fixes #3813
Closes #3815
|
|
As previously planned and documented in DEPRECATE.md, all pipelining
code is removed.
Closes #3651
|
|
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes #1261
Closes #1975
|
|
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes #2431
Closes #3669
|
|
|
|
|
|
- no need to have them protocol specific
- no need to set pointers to them with the Curl_setup_transfer() call
- make Curl_setup_transfer() operate on a transfer pointer, not
connection
- switch some counters from long to the more proper curl_off_t type
Closes #3627
|
|
Without it set, we would unwillingly triger the "HTTP error before end
of send, stop sending" condition even if the entire POST body had been
sent (since it wouldn't know the expected size) which would
unnecessarily log that message and close the connection when it didn't
have to.
Reported-by: Matt McClure
Bug: https://curl.haxx.se/mail/archive-2019-02/0023.html
Closes #3624
|
|
This allows the compiler to pack and align the structs better in
memory. For a rather feature-complete build on x86_64 Linux, gcc 8.1.2
makes the Curl_easy struct 4.9% smaller. From 6312 bytes to 6000.
Removed an unused struct field.
No functionality changes.
Closes #3610
|
|
Previously the function would edit the provided header in-place when a
semicolon is used to signify an empty header. This made it impossible to
use the same set of custom headers in multiple threads simultaneously.
This approach now makes a local copy when it needs to edit the string.
Reported-by: d912e3 on github
Fixes #3578
Closes #3579
|
|
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
|
|
Closes #3417
|
|
This reverts commit 07ebaf837843124ee670e5b8c218b80b92e06e47.
This also reopens PR #3275 which brought the change now reverted.
Fixes #3384
Closes #3439
|
|
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes #2873
Closes #3383
|
|
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes #3350
|
|
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes #2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353
Closes #3356
|
|
The http status code 204 (No Content) should not change the "condition
unmet" flag. Only the http status code 304 (Not Modified) should do
this.
Closes #359
|
|
Since v7.62.0, cURL tries to use HTTP/2 whenever the server announces
the capability. However, NTLM authentication only works with HTTP/1.1,
and will likely remain in that boat (for details, see
https://docs.microsoft.com/en-us/iis/get-started/whats-new-in-iis-10/http2-on-iis#when-is-http2-not-supported).
When we just found out that we want to use NTLM, and when the current
connection runs in HTTP/2 mode, let's force the connection to be closed
and to be re-opened using HTTP/1.1.
Fixes https://github.com/curl/curl/issues/3341.
Closes #3345
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes #3296
Closes #3297
|
|
Fix HTTP POST using CURLAUTH_NEGOTIATE.
Closes #3275
|
|
as detected by codespell 1.14.0
Closes https://github.com/curl/curl/pull/3114
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
|
|
If the rewind would fail, a strdup() would not get freed.
Detected by OSS-Fuzz
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10665
Closes #3044
|
|
Detected by Coverity. CID 1439610.
Follow-up from 46e164069d1a523
Closes #3034
|
|
... to make it a truly unified URL parser.
Closes #3017
|
|
... so that they can clear the original pointer on failure, which makes
the error-paths and their cleanups easier.
Closes #2992
|