| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Don't clobber the receive buffer.
|
|
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
|
|
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -U bob:b -x http://localhost:8181 http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6d42ca0780f8e0a747cecf9ba45f151
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -x http://localhost:8181 http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
|
|
Closes #1356
|
|
... by removing the else branch after a return, break or continue.
Closes #1310
|
|
This prevents a "Descriptor is not a socket" error for WinSSL.
Reported-by: Antony74@users.noreply.github.com
Reviewed-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1239
|
|
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
|
|
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes #1286
Closes #1302
|
|
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
|
|
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes #1222
|
|
Before:
```
% src/curl https://sigsegv.ninja/ -v --http2
...
> GET / HTTP/1.1
> Host: sigsegv.ninja
> User-Agent: curl/7.52.2-DEV
> Accept: */*
>
...
```
After:
```
% src/curl https://sigsegv.ninja/ -v --http2
...
> GET / HTTP/2
> Host: sigsegv.ninja
> User-Agent: curl/7.52.2-DEV
> Accept: */*
>
```
|
|
... it only confuses people.
|
|
... they're already frowned upon in our source code style guide, this
now enforces the rule harder.
|
|
In order to make the code style more uniform everywhere
|
|
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
|
|
Discussed: https://curl.haxx.se/mail/lib-2016-11/0087.html
|
|
We had some confusions on when each function was used. We should not act
differently on different locales anyway.
|
|
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
|
|
Previously it only held references to them, which was reckless as the
thread lock was released so the cookies could get modified by other
handles that share the same cookie jar over the share interface.
CVE-2016-8623
Bug: https://curl.haxx.se/docs/adv_20161102I.html
Reported-by: Cure53
|
|
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
|
|
... but don't send the actual header over the wire as it isn't accepted.
Chunked uploading is still triggered using this method.
Fixes #1013
Fixes #662
|
|
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes #941
|
|
- unknown protocols probably won't send more headers (e.g. WebSocket)
- improved comments and moved them to the correct case statements
Closes #899
|
|
From commit 2708d4259b.
|
|
Made by Visual Studio's auto-correct feature and missed by me in my own
code reviews!
|
|
Hooked up the HTTP authentication layer to query the new 'is mechanism
supported' functions when deciding what mechanism to use.
As per commit 00417fd66c existing functionality is maintained for now.
|
|
This reverts commit 113f04e664b16b944e64498a73a4dab990fe9a68.
|
|
- the expression of an 'if' was always true
- a 'while' contained a condition that was always true
- use 'if(k->exp100 > EXP100_SEND_DATA)' instead of 'if(k->exp100)'
- fixed a typo
Closes #889
|
|
|
|
Closes #887
|
|
- Change the parser to not require a minor version for HTTP/2.
HTTP/2 connection reuse broke when we changed from HTTP/2.0 to HTTP/2
in 8243a95 because the parser still expected a minor version.
Bug: https://github.com/curl/curl/issues/855
Reported-by: Andrew Robbins, Frank Gevaerts
|
|
Only protocols that actually have a protocol registered for ALPN and NPN
should try to get that negotiated in the TLS handshake. That is only
HTTPS (well, http/1.1 and http/2) right now. Previously ALPN and NPN
would wrongly be used in all handshakes if libcurl was built with it
enabled.
Reported-by: Jay Satiro
Fixes #789
|
|
Reported-by: rcanavan
Assisted-by: Isaac Boukris
Closes #785
|
|
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes #743
|
|
Previously, connections were closed immediately before the user had a
chance to extract the socket when the proxy required Negotiate
authentication.
This regression was brought in with the security fix in commit
79b9d5f1a42578f
Closes #655
|
|
Makes curl connect to the given host+port instead of the host+port found
in the URL.
|
|
|
|
Supports HTTP/2 over clear TCP
- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.
- Supports new version to “force” the use of HTTP/2 over clean TCP
- Add common line parameter “--http2-prior-knowledge” to the Curl
command line tool.
|
|
|
|
... as we check for a NULL pointer below, we move the derefence to after
the check. Detected by PVS Studio.
Reported-by: Alexis La Goutte
|
|
... as it now is used by multi.c only.
|
|
Renamed the header and source files for this module as they are HTTP
specific and as such, they should use the naming convention as other
HTTP authentication source files do - this revert commit 260ee6b7bf.
Note: We could also rename curl_ntlm_wb.[c|h], however, the Winbind
code needs separating from the HTTP protocol and migrating into the
vauth directory, thus adding support for Winbind to the SASL based
protocols such as IMAP, POP3 and SMTP.
|
|
Part 1 of 2 - Moved the SSPI based Negotiate authentication code.
|
|
|
|
warning C4189: 'data': local variable is initialized but not referenced
|
|
At one point during the development of HTTP/2, the commit 133cdd29ea0
introduced automatic decompression of Content-Encoding as that was what
the spec said then. Now however, HTTP/2 should work the same way as
HTTP/1 in this regard.
Reported-by: Kazuho Oku
Closes #661
|
|
nghttp2 callback deals with TLS layer and therefore the header does not
need to be broken into chunks.
Bug: https://github.com/curl/curl/issues/659
Reported-by: Kazuho Oku
|
|
RFC 7230 says we should stop. Firefox already stopped.
Bug: https://github.com/curl/curl/issues/633
Reported-By: Brad Fitzpatrick
Closes #633
|
|
|
