aboutsummaryrefslogtreecommitdiff
path: root/lib/http2.c
AgeCommit message (Collapse)Author
2019-06-11http2: remove CURL_DISABLE_TYPECHECK defineDaniel Stenberg
... in http2-less builds as it served no use.
2019-05-30http2: Stop drain from being permanently set onJosie Huddleston
Various functions called within Curl_http2_done() can have the side-effect of setting the Easy connection into drain mode (by calling drain_this()). However, the last time we unset this for a transfer (by calling drained_transfer()) is at the beginning of Curl_http2_done(). If the Curl_easy is reused for another transfer, it is then stuck in drain mode permanently, which in practice makes it unable to write any data in the new transfer. This fix moves the last call to drained_transfer() to later in Curl_http2_done(), after the functions that could potentially call for a drain. Fixes #3966 Closes #3967 Reported-by: Josie-H
2019-05-16cleanup: remove FIXME and TODO commentsDaniel Stenberg
They serve very little purpose and mostly just add noise. Most of them have been around for a very long time. I read them all before removing or rephrasing them. Ref: #3876 Closes #3883
2019-04-06pipelining: removedDaniel Stenberg
As previously planned and documented in DEPRECATE.md, all pipelining code is removed. Closes #3651
2019-04-03documentation: Fix several typosTim Rühsen
Closes #3724 Reviewed-by: Jakub Zakrzewski Reviewed-by: Daniel Gustafsson
2019-02-20http2: verify :athority in push promise requestsDaniel Stenberg
RFC 7540 says we should verify that the push is for an "authoritative" server. We make sure of this by only allowing push with an :athority header that matches the host that was asked for in the URL. Fixes #3577 Reported-by: Nicolas Grekas Bug: https://curl.haxx.se/mail/lib-2019-02/0057.html Closes #3581
2019-02-12http2: multi_connchanged() moved from multi.c, only used for h2Daniel Stenberg
Closes #3557
2019-02-10cleanup: make local functions staticDaniel Stenberg
urlapi: turn three local-only functions into statics conncache: make conncache_find_first_connection static multi: make detach_connnection static connect: make getaddressinfo static curl_ntlm_core: make hmac_md5 static http2: make two functions static http: make http_setup_conn static connect: make tcpnodelay static tests: make UNITTEST a thing to mark functions with, so they can be static for normal builds and non-static for unit test builds ... and mark Curl_shuffle_addr accordingly. url: make up_free static setopt: make vsetopt static curl_endian: make write32_le static rtsp: make rtsp_connisdead static warnless: remove unused functions memdebug: remove one unused function, made another static
2019-01-11urldata: rename easy_conn to just connDaniel Stenberg
We use "conn" everywhere to be a pointer to the connection. Introduces two functions that "attaches" and "detaches" the connection to and from the transfer. Going forward, we should favour using "data->conn" (since a transfer always only has a single connection or none at all) to "conn->data" (since a connection can have none, one or many transfers associated with it and updating conn->data to be correct is error prone and a frequent reason for internal issues). Closes #3442
2018-12-20http2: clear pause stream id if it gets closedDaniel Stenberg
Reported-by: Florian Pritz Fixes #3392 Closes #3399
2018-12-08Upon HTTP_1_1_REQUIRED, retry the request with HTTP/1.1Johannes Schindelin
This is a companion patch to cbea2fd2c (NTLM: force the connection to HTTP/1.1, 2018-12-06): with NTLM, we can switch to HTTP/1.1 preemptively. However, with other (Negotiate) authentication it is not clear to this developer whether there is a way to make it work with HTTP/2, so let's try HTTP/2 first and fall back in case we encounter the error HTTP_1_1_REQUIRED. Note: we will still keep the NTLM workaround, as it avoids an extra round trip. Daniel Stenberg helped a lot with this patch, in particular by suggesting to introduce the Curl_h2_http_1_1_error() function. Closes #3349 Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2018-11-23snprintf: renamed and we now only use msnprintf()Daniel Stenberg
The function does not return the same value as snprintf() normally does, so readers may be mislead into thinking the code works differently than it actually does. A different function name makes this easier to detect. Reported-by: Tomas Hoger Assisted-by: Daniel Gustafsson Fixes #3296 Closes #3297
2018-10-18travis: add build for "configure --disable-verbose"Daniel Stenberg
Closes #3144
2018-10-03memory: ensure to check allocation resultsDaniel Gustafsson
The result of a memory allocation should always be checked, as we may run under memory pressure where even a small allocation can fail. This adds checking and error handling to a few cases where the allocation wasn't checked for success. In the ftp case, the freeing of the path variable is moved ahead of the allocation since there is little point in keeping it around across the strdup, and the separation makes for more readable code. In nwlib, the lock is aslo freed in the error path. Also bumps the copyright years on affected files. Closes #3084 Reviewed-by: Jay Satiro <raysatiro@yahoo.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-09-25Curl_http2_done: fix memleak in error pathDaniel Stenberg
Free 'header_recvbuf' unconditionally even if 'h2' isn't (yet) set, for early failures. Detected by OSS-Fuzz Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10669 Closes #3046
2018-09-16http: made Curl_add_buffer functions take a pointer-pointerDaniel Stenberg
... so that they can clear the original pointer on failure, which makes the error-paths and their cleanups easier. Closes #2992
2018-09-16http2: fix memory leaks on error-pathDaniel Stenberg
2018-09-10misc: fix typos in commentsDaniel Gustafsson
Closes #2963
2018-09-07upkeep: add a connection upkeep API: curl_easy_conn_upkeep()Max Dymond
Add functionality so that protocols can do custom keepalive on their connections, when an external API function is called. Add docs for the new options in 7.62.0 Closes #1641
2018-09-02http2: Use correct format identifier for stream_idRikard Falkeborn
Closes #2928
2018-08-22http2: abort the send_callback if not setup yetDaniel Stenberg
When Curl_http2_done() gets called before the http2 data is setup all the way, we cannot send anything and this should just return an error. Detected by OSS-Fuzz Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10012
2018-08-21http2: remove four unused nghttp2 callbacksDaniel Stenberg
Closes #2903
2018-08-21http2: avoid set_stream_user_data() before stream is assignedDaniel Stenberg
... before the stream is started, we have it set to -1. Fixes #2894 Closes #2898
2018-08-17http2: make sure to send after RST_STREAMDaniel Stenberg
If this is the last stream on this connection, the RST_STREAM might not get pushed to the wire otherwise. Fixes #2882 Closes #2887 Researched-by: Michael Kaufmann
2018-08-15http2: check nghttp2_session_set_stream_user_data return codeDaniel Stenberg
Might help bug #2688 debugging Closes #2880
2018-08-13http: fix for tiny "HTTP/0.9" responseDaniel Stenberg
Deal with tiny "HTTP/0.9" (header-less) responses by checking the status-line early, even before a full "HTTP/" is received to allow detecting 0.9 properly. Test 1266 and 1267 added to verify. Fixes #2420 Closes #2872
2018-07-30http2: clear the drain counter in Curl_http2_doneDaniel Stenberg
Reported-by: Andrei Virtosu Fixes #2800 Closes #2809
2018-07-20http2: several cleanupsDaniel Stenberg
- separate easy handle from connections better - added asserts on a number of places - added sanity check of pipelines for debug builds Closes #2751
2018-05-31strictness: correct {infof, failf} format specifiersRikard Falkeborn
Closes #2623
2018-05-21checksrc: make sure sizeof() is used *with* parenthesesDaniel Stenberg
... and unify the source code to adhere. Closes #2563
2018-05-14http2: remove unused variablesteini2000
Closes #2570
2018-05-14http2: use easy handle of stream for loggingsteini2000
2018-05-14http2: use the correct function pointer typedefDaniel Stenberg
Fixes gcc-8 picky compiler warnings Reported-by: Rikard Falkeborn Bug: #2560 Closes #2568
2018-05-14http2: getsock fix for uploadsDaniel Stenberg
When there's an upload in progress, make sure to wait for the socket to become writable. Detected-by: steini2000 on github Bug: #2520 Closes #2567
2018-04-26http2: fix null pointer dereference in http2_connisdeadDaniel Stenberg
This function can get called on a connection that isn't setup enough to have the 'recv_underlying' function pointer initialized so it would try to call the NULL pointer. Reported-by: Dario Weisser Follow-up to db1b2c7fe9b093f8 (never shipped in a release) Closes #2536
2018-04-26http2: get rid of another strstr()Daniel Stenberg
Follow-up to 1514c44655e12e: replace another strstr() call done on a buffer that might not be zero terminated - with a memchr() call, even if we know the substring will be found. Assisted-by: Max Dymond Detected by OSS-Fuzz Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8021 Closes #2534
2018-04-23http2: convert an assert to run-time checkDaniel Stenberg
Fuzzing has proven we can reach code in on_frame_recv with status_code not having been set, so let's detect that in run-time (instead of with assert) and error error accordingly. (This should no longer happen with the latest nghttp2) Detected by OSS-Fuzz Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=7903 Closes #2514
2018-04-20http2: handle GOAWAY properlyDaniel Stenberg
When receiving REFUSED_STREAM, mark the connection for close and retry streams accordingly on another/fresh connection. Reported-by: Terry Wu Fixes #2416 Fixes #1618 Closes #2510
2018-04-20http2: clear the "drain counter" when a stream is closedDaniel Stenberg
This fixes the notorious "httpc->drain_total >= data->state.drain" assert. Reported-by: Anders Bakken Fixes #1680 Closes #2509
2018-04-20http2: avoid strstr() on data not zero terminatedDaniel Stenberg
It's not strictly clear if the API contract allows us to call strstr() on a string that isn't zero terminated even when we know it will find the substring, and clang's ASAN check dislikes us for it. Also added a check of the return code in case it fails, even if I can't think of a situation how that can trigger. Detected by OSS-Fuzz Closes #2513 Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=7760
2018-04-19http2: handle on_begin_headers() called more than onceDaniel Stenberg
This triggered an assert if called more than once in debug mode (and a memory leak if not debug build). With the right sequence of HTTP/2 headers incoming it can happen. Detected by OSS-Fuzz Closes #2507 Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=7764
2018-03-22http2: read pending frames (including GOAWAY) in connection-checkDaniel Stenberg
If a connection has received a GOAWAY frame while not being used, the function now reads frames off the connection before trying to reuse it to avoid reusing connections the server has told us not to use. Reported-by: Alex Baines Fixes #1967 Closes #2402
2018-03-15http2: fixes typoKobi Gurkan
Closes #2387
2018-03-12http2: mark the connection for close on GOAWAYDaniel Stenberg
... don't consider it an error! Assisted-by: Jay Satiro Reported-by: Łukasz Domeradzki Fixes #2365 Closes #2375
2018-03-10http2: verbose output new MAX_CONCURRENT_STREAMS valuesDaniel Stenberg
... as it is interesting for many users.
2018-02-15TODO fixed: Detect when called from within callbacksBjörn Stenberg
Closes #2302
2018-01-30http2: set DEBUG_HTTP2 to enable more HTTP/2 loggingDaniel Stenberg
... instead of doing it unconditionally in debug builds. It cluttered up the output a little too much.
2018-01-11http2: fix incorrect trailer buffer sizeZhouyihai Ding
Prior to this change the stored byte count of each trailer was miscalculated and 1 less than required. It appears any trailer after the first that was passed to Curl_client_write would be truncated or corrupted as well as the size. Potentially the size of some subsequent trailer could be erroneously extracted from the contents of that trailer, and since that size is used by client write an out-of-bounds read could occur and cause a crash or be otherwise processed by client write. The bug appears to have been born in 0761a51 (precedes 7.49.0). Closes https://github.com/curl/curl/pull/2231
2017-11-21http2: fix "Value stored to 'end' is never read" scan-build errorDaniel Stenberg
2017-11-21http2: fix "Value stored to 'hdbuf' is never read" scan-build errorDaniel Stenberg
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 08:29:38 +0000