| Age | Commit message (Collapse) | Author |
|---|
|
It turns out the google GFE HTTP/2 servers send a PING frame immediately
after a stream ends and its last DATA has been received by curl. So if
we don't drain that from the socket, it makes the socket readable in
subsequent checks and libcurl then (wrongly) assumes the connection is
dead when trying to reuse the connection.
Reported-by: Joonas Kuorilehto
Discussed in #750
|
|
It offers extra info from nghttp2 in certain error cases. Like for
example when trying prior-knowledge http2 on a server that doesn't speak
http2 at all. The error message is passed on as a verbose message to
libcurl.
Discussed in #722
The error callback was added in nghttp2 1.9.0
|
|
Since commit a5aec58 the handler schemes need to match for the
connections to be reused and for HTTP/2 multiplexing to work, reusing
connections is very important!
Closes #736
|
|
|
|
This regression landed in 5778e6f5 and made libcurl not act on received
settings and instead stayed with its internal defaults.
Bug: http://curl.haxx.se/mail/lib-2016-01/0031.html
Reported-by: Bankde
|
|
Discussed in https://github.com/bagder/curl/pull/564
|
|
Check that the trailer buffer exists before attempting a client write
for trailers on stream close.
Refer to comments in https://github.com/bagder/curl/pull/564
|
|
This commit adds trailer support in HTTP/2. In HTTP/1.1, chunked
encoding must be used to send trialer fields. HTTP/2 deprecated any
trandfer-encoding, including chunked. But trailer fields are now
always available.
Since trailer fields are relatively rare these days (gRPC uses them
extensively though), allocating buffer for trailer fields is done when
we detect that HEADERS frame containing trailer fields is started. We
use Curl_add_buffer_* functions to buffer all trailers, just like we
do for regular header fields. And then deliver them when stream is
closed. We have to be careful here so that all data are delivered to
upper layer before sending trailers to the application.
We can deliver trailer field one by one using NGHTTP2_ERR_PAUSE
mechanism, but current method is far more simple.
Another possibility is use chunked encoding internally for HTTP/2
traffic. I have not tested it, but it could add another overhead.
Closes #564
|
|
When NGHTTP2_ERR_PAUSE is returned from data_source_read_callback, we
might not process DATA frame fully. Calling nghttp2_session_mem_recv()
again will continue to process DATA frame, but if there is no incoming
frames, then we have to call it again with 0-length data. Without this,
on_stream_close callback will not be called, and stream could be hanged.
Bug: http://curl.haxx.se/mail/lib-2015-11/0103.html
Reported-by: Francisco Moraes
|
|
|
|
- set the correct stream_id for pushed streams
- init maxdownload and size properly
|
|
give the new stream the old one's stream_weight internally to avoid
sending a PRIORITY frame unless asked for it
|
|
This reverts commit 64e959ffe37c436503f9fed1ce2d6ee6ae50bd9a.
Feedback-by: Dan Fandrich
URL: http://curl.haxx.se/mail/lib-2015-11/0062.html
|
|
|
|
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
|
|
We need 1.0.0 or later. Also verified by configure.
|
|
|
|
Removed wrong assert()s
The 'conn' passed in as userdata can be used and there can be other
sessionhandles ('data') than the single one this checked for.
|
|
CURLOPT_STREAM_DEPENDS
CURLOPT_STREAM_DEPENDS_E
CURLOPT_STREAM_PRIORITY
|
|
bug introduced by 18691642931e5c7ac8af83ac3a84fbcb36000f96.
Closes #493
|
|
If the underlying recv called by http2_recv returns -1 then that is the
value http2_recv returns to the caller.
|
|
For a single-stream download from localhost, we managed to increase
transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of
this single fix.
|
|
... only call it when there is data arriving for another handle than the
one that is currently driving it.
Improves single-stream download performance quite a lot.
Thanks-to: Tatsuhiro Tsujikawa
Bug: http://curl.haxx.se/mail/lib-2015-09/0097.html
|
|
|
|
RFC 7540 section 8.1.2.2 states: "An endpoint MUST NOT generate an
HTTP/2 message containing connection-specific header fields; any message
containing connection-specific header fields MUST be treated as
malformed"
Closes #401
|
|
Leftovers from when we removed the private socket hash.
Coverity CID 1317365, "Logically dead code"
|
|
"Explicit null dereferenced (FORWARD_NULL)"
Coverity CID 1317366
|
|
Return 0 instead of NGHTTP2_ERR_CALLBACK_FAILURE if we can't locate the
SessionHandle. Apparently mod_h2 will sometimes send a frame for a
stream_id we're finished with.
Use nghttp2_session_get_stream_user_data and
nghttp2_session_set_stream_user_data to identify SessionHandles instead
of a hash.
Closes #372
|
|
Otherwise it would never be called for an HTTP/2 connection, which has
its own disconnect handler.
I spotted this while debugging <https://bugzilla.redhat.com/1248389>
where the http_disconnect() handler was called on an FTP session handle
causing 'dnf' to crash. conn->data->req.protop of type (struct FTP *)
was reinterpreted as type (struct HTTP *) which resulted in SIGSEGV in
Curl_add_buffer_free() after printing the "Connection cache is full,
closing the oldest one." message.
A previously working version of libcurl started to crash after it was
recompiled with the HTTP/2 support despite the HTTP/2 protocol was not
actually used. This commit makes it work again although I suspect the
root cause (reinterpreting session handle data of incompatible protocol)
still has to be fixed. Otherwise the same will happen when mixing FTP
and HTTP/2 connections and exceeding the connection cache limit.
Reported-by: Tomas Tomecek
Bug: https://bugzilla.redhat.com/1248389
|
|
Detected by Coverity.
Error: NULL_RETURNS:
lib/http2.c:1301: returned_null: "strchr" returns null (checked 103 out of 109 times).
lib/http2.c:1301: var_assigned: Assigning: "hdbuf" = null return value from "strchr".
lib/http2.c:1302: dereference: Incrementing a pointer which might be null: "hdbuf".
1300|
1301| hdbuf = strchr(hdbuf, 0x0a);
1302|-> ++hdbuf;
1303|
1304| authority_idx = 0;
|
|
|
|
They should not trigger, but in case of internal problems we at least
avoid crashes this way.
|
|
|
|
Since we do prefix match using given header by application code
against header name pair in format "NAME:VALUE", and VALUE part can
contain ":", we have to careful about existence of ":" in header
parameter. ":" should be allowed to match HTTP/2 pseudo-header field,
and other use of ":" in header must be treated as error, and
curl_pushheader_byname should return NULL. This commit implements
this behaviour.
|
|
|
|
|
|
|
|
|
|
|
|
Previously, after seeing upgrade to HTTP/2, we feed data followed by
upgrade response headers directly to nghttp2_session_mem_recv() in
Curl_http2_switched(). But it turns out that passed buffer, mem, is
part of stream->mem, and callbacks called by
nghttp2_session_mem_recv() will write stream specific data into
stream->mem, overwriting input data. This will corrupt input, and
most likely frame length error is detected by nghttp2 library. The
fix is first copy the passed data to HTTP/2 connection buffer,
httpc->inbuf, and call nghttp2_session_mem_recv().
|
|
Coverity CID 1299426 warned about possible NULL dereference otherwise,
but that would only ever happen if we get invalid HTTP/2 data with
frames for stream 0. Avoid this risk by returning early when stream 0 is
used.
|
|
This commit just add implicitly opened stream 1 to streams hash.
|
|
It makes them easier to match output from the nghttpd test server.
|
|
Previously, when we send all given buffer in data_source_callback, we
return NGHTTP2_ERR_DEFERRED, and nghttp2 library removes this stream
temporarily for writing. This itself is good. If this is the sole
stream in the session, nghttp2_session_want_write() returns zero,
which means that libcurl does not check writeability of the underlying
socket. This leads to very slow upload, because it seems curl only
upload 16k something per 1 second. To fix this, if we still have data
to send, call nghttp2_session_resume_data after nghttp2_session_send.
This makes nghttp2_session_want_write() returns nonzero (if connection
window still opens), and as a result, socket writeability is checked,
and upload speed becomes normal.
|
|
Use a curl_off_t for upload left
|
|
|
|
as after 4883f7019d3, the *_clean() function only flushes the hash.
|
|
We could get stream ID not in the hash in on_stream_close. For
example, if we decided to reject stream (e.g., PUSH_PROMISE), then we
don't create stream and store it in hash with its stream ID.
|
|
This commit requires nghttp2 v1.0.0 to compile, and migrate to v1.0.0,
and utilize recent version of nghttp2 to simplify the code,
First we use nghttp2_option_set_no_recv_client_magic function to
detect nghttp2 v1.0.0. That function only exists since v1.0.0.
Since nghttp2 v0.7.5, nghttp2 ensures header field ordering, and
validates received header field. If it found error, RST_STREAM with
PROTOCOL_ERROR is issued. Since we require v1.0.0, we can utilize
this feature to simplify libcurl code. This commit does this.
Migration from 0.7 series are done based on nghttp2 migration
document. For libcurl, we removed the code sending first 24 bytes
client magic. It is now done by nghttp2 library.
on_invalid_frame_recv callback signature changed, and is updated
accordingly.
|
|
|
