| Age | Commit message (Collapse) | Author |
|---|
|
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
|
|
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
76 private header files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: amigaos.h -> curl_amigaos.h
renamed: arpa_telnet.h -> curl_arpa_telnet.h
renamed: asyn.h -> curl_asyn.h
renamed: axtls.h -> curl_axtls.h
renamed: bundles.h -> curl_bundles.h
renamed: conncache.h -> curl_conncache.h
renamed: connect.h -> curl_connect.h
renamed: content_encoding.h -> curl_content_encoding.h
renamed: cookie.h -> curl_cookie.h
renamed: cyassl.h -> curl_cyassl.h
renamed: dict.h -> curl_dict.h
renamed: easyif.h -> curl_easyif.h
renamed: escape.h -> curl_escape.h
renamed: file.h -> curl_file.h
renamed: fileinfo.h -> curl_fileinfo.h
renamed: formdata.h -> curl_formdata.h
renamed: ftp.h -> curl_ftp.h
renamed: ftplistparser.h -> curl_ftplistparser.h
renamed: getinfo.h -> curl_getinfo.h
renamed: gopher.h -> curl_gopher.h
renamed: gtls.h -> curl_gtls.h
renamed: hash.h -> curl_hash.h
renamed: hostcheck.h -> curl_hostcheck.h
renamed: hostip.h -> curl_hostip.h
renamed: http.h -> curl_http.h
renamed: http_chunks.h -> curl_http_chunks.h
renamed: http_digest.h -> curl_http_digest.h
renamed: http_negotiate.h -> curl_http_negotiate.h
renamed: http_proxy.h -> curl_http_proxy.h
renamed: if2ip.h -> curl_if2ip.h
renamed: imap.h -> curl_imap.h
renamed: inet_ntop.h -> curl_inet_ntop.h
renamed: inet_pton.h -> curl_inet_pton.h
renamed: krb4.h -> curl_krb4.h
renamed: llist.h -> curl_llist.h
renamed: memdebug.h -> curl_memdebug.h
renamed: multiif.h -> curl_multiif.h
renamed: netrc.h -> curl_netrc.h
renamed: non-ascii.h -> curl_non-ascii.h
renamed: nonblock.h -> curl_nonblock.h
renamed: nssg.h -> curl_nssg.h
renamed: parsedate.h -> curl_parsedate.h
renamed: pingpong.h -> curl_pingpong.h
renamed: polarssl.h -> curl_polarssl.h
renamed: pop3.h -> curl_pop3.h
renamed: progress.h -> curl_progress.h
renamed: qssl.h -> curl_qssl.h
renamed: rawstr.h -> curl_rawstr.h
renamed: rtsp.h -> curl_rtsp.h
renamed: select.h -> curl_select.h
renamed: sendf.h -> curl_sendf.h
renamed: setup.h -> curl_setup.h
renamed: setup_once.h -> curl_setup_once.h
renamed: share.h -> curl_share.h
renamed: slist.h -> curl_slist.h
renamed: smtp.h -> curl_smtp.h
renamed: sockaddr.h -> curl_sockaddr.h
renamed: socks.h -> curl_socks.h
renamed: speedcheck.h -> curl_speedcheck.h
renamed: splay.h -> curl_splay.h
renamed: ssh.h -> curl_ssh.h
renamed: sslgen.h -> curl_sslgen.h
renamed: ssluse.h -> curl_ssluse.h
renamed: strdup.h -> curl_strdup.h
renamed: strequal.h -> curl_strequal.h
renamed: strerror.h -> curl_strerror.h
renamed: strtok.h -> curl_strtok.h
renamed: strtoofft.h -> curl_strtoofft.h
renamed: telnet.h -> curl_telnet.h
renamed: tftp.h -> curl_tftp.h
renamed: timeval.h -> curl_timeval.h
renamed: transfer.h -> curl_transfer.h
renamed: url.h -> curl_url.h
renamed: urldata.h -> curl_urldata.h
renamed: warnless.h -> curl_warnless.h
renamed: wildcard.h -> curl_wildcard.h
----------------------------------------
|
|
76 private header files renamed to use our standard naming scheme.
This change affects 322 files in libcurl's source tree.
|
|
Inclusion of top two most included header files now done in setup_once.h
|
|
Avoid 'interface' literal that some MinGW versions define as a macro
|
|
|
|
Do not try to resolve interfaces names via DNS by recognizing interface
names in a few ways. If the interface option argument has a prefix of
"if!" then treat the argument as only an interface. Similarly, if the
interface argument is the name of an interface (even if it does not have
an IP address assigned), treat it as an interface name. Finally, if the
interface argument is prefixed by "host!" treat it as a hostname that
must be resolved by /etc/hosts or DNS.
These changes allow a client using the multi interfaces to avoid
blocking on name resolution if the interface loses its IP address or
disappears.
|
|
|
|
address, the one on the box libcurl is running, not the 'remote' one.
|
|
systems supporting getifaddrs(). Also fixed a problem where an IPv6
address could be chosen instead of an IPv4 one for --interface when it
involved a name lookup.
|
|
|
|
|
|
|
|
linked list for name resolved data, even on hosts/systems with only IPv4
stacks as this simplifies a lot of code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
