aboutsummaryrefslogtreecommitdiff
path: root/lib/imap.c
AgeCommit message (Collapse)Author
2013-09-04imap/smtp: Fixed incorrect SASL mechanism selection with XOAUTH2 serversSteve Holme
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP or SMTP server advertised support for it even though a user's password was supplied but bearer token wasn't. Modified the selection logic so that XOAUTH2 will only be selected if the server supports it and A) The curl user/libcurl programmer has specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2) The bearer token is specified. Obviously if XOAUTH is asked for via the login option but no token is specified the user will receive a authentication failure which makes more sense than no known authentication mechanisms supported!
2013-08-31imap: Fixed response check for EXPUNGE commandSteve Holme
2013-08-26imap: added basic SASL XOAUTH2 supportKyle L. Huff
Added the ability to use an XOAUTH2 bearer token [RFC6750] with IMAP for authentication using RFC6749 "OAuth 2.0 Authorization Framework". The bearer token is expected to be valid for the user specified in conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has an advertised auth mechanism of "XOAUTH2", the user and access token are formatted as a base64 encoded string and sent to the server as "A001 AUTHENTICATE XOAUTH2 <bearer token>".
2013-08-19imap: Fixed response check for SEARCH commandAlex McLellan
Adding this line allows libcurl to return the server response when performing a search command via a custom request.
2013-08-12SessionHandle: the protocol specific pointer is now a void *Daniel Stenberg
All protocol handler structs are now opaque (void *) in the SessionHandle struct and moved in the request-specific sub-struct 'SingleRequest'. The intension is to keep the protocol specific knowledge in their own dedicated source files [protocol].c etc. There's some "leakage" where this policy is violated, to be addressed at a later point in time.
2013-08-12urldata: clean up the use of the protocol specific structsDaniel Stenberg
1 - always allocate the struct in protocol->setup_connection. Some protocol handlers had to get this function added. 2 - always free at the end of a request. This is also an attempt to keep less memory in the handle after it is completed.
2013-08-09comments: remove old and wrong multi/easy interface statementsDaniel Stenberg
2013-07-24string formatting: fix zero-length printf format stringYang Tse
2013-07-24imap.c: imap_sendf() fix va_start/va_end matchingYang Tse
2013-07-24string formatting: fix 25+ printf-style format stringsYang Tse
2013-04-28email: Tidy up of *_perform_authenticate()Steve Holme
Removed the hard returns from imap and pop3 by using the same style for sending the authentication string as smtp. Moved the "Other mechanisms not supported" check in smtp to match that of imap and pop3 to provide consistency between the three email protocols.
2013-04-27imap: Added support for overriding the SASL initial responseSteve Holme
In addition to checking for the SASL-IR capability the user can override the sending of the client's initial response in the AUTHENTICATION command with the use of CURLOPT_SASL_IR should the server erroneously not report SASL-IR when it does support it.
2013-04-13imap: Added support for ;auth=<mech> in the URLSteve Holme
Added support for specifying the preferred authentication mechanism in the URL as per RFC-5092.
2013-04-12imap: Added function description to imap_parse_custom_request()Steve Holme
2013-04-12imap: Moved utility functions to end of imap.c (Part 3/3)Steve Holme
Moved imap_is_bchar() be with the other utility based functions.
2013-04-12imap: Moved utility functions to end of imap.c (Part 2/3)Steve Holme
Moved imap_parse_url_path() and imap_parse_custom_request() to the end of the file allowing all utility functions to be grouped together.
2013-04-12imap: Moved utility functions to end of imap.c (Part 1/3)Steve Holme
Moved imap_atom() and imap_sendf() to the end of the file allowing all utility functions to be grouped together.
2013-04-12imap: Corrected function description for imap_connect()Steve Holme
2013-03-17imap: Fixed incorrect initial response generation for SASL AUTHENTICATESteve Holme
Fixed incorrect initial response generation for the NTLM and LOGIN SASL authentication mechanisms when the SASL-IR was detected. Introduced in commit: 6da7dc026c14.
2013-03-10imap: Reworked some function descriptionsSteve Holme
2013-03-10imap: Added some missing comments to imap_sendf()Steve Holme
2013-03-09email: Removed hard returns from init functionsSteve Holme
2013-03-09imap: Re-factored all perform based functionsSteve Holme
Standardised the naming of all perform based functions to be in the form imap_perform_something().
2013-03-09imap: Added description comments to all perform based functionsSteve Holme
2013-03-09imap: Removed the need for separate custom request functionsSteve Holme
Moved the custom request processing into the LIST command as the logic is the same.
2013-03-09imap: Corrected typo in commentSteve Holme
2013-03-09imap: Moved imap_logout() to be grouped with the other perform functionsSteve Holme
2013-03-09email: Updated the function descriptions for the logout / quit functionsSteve Holme
Updated the function description comments following commit 4838d196fdbf.
2013-03-09email: Simplified the logout / quit functionsSteve Holme
Moved the blocking state machine to the disconnect functions so that the logout / quit functions are only responsible for sending the actual command needed to logout or quit. Additionally removed the hard return on failure.
2013-03-08email: Tidied up the *_regular_transfer() functionsSteve Holme
Added comments and simplified convoluted dophase_done comparison.
2013-03-08email: Simplified nesting of if statements in *_doing() functionsSteve Holme
2013-03-08imap: Fixed handling of untagged responses for the STORE custom commandSteve Holme
Added an exception, for the STORE command, to the untagged response processor in imap_endofresp() as servers will back respones containing the FETCH keyword instead.
2013-03-07imap: Fixed SELECT not being performed for custom requestsSteve Holme
2013-03-07email: Minor code tidy up following recent changesSteve Holme
Removed unwanted braces and added variable initialisation.
2013-03-07email: Optimised block_statemach() functionsSteve Holme
Optimised the result test in each of the block_statemach() functions.
2013-03-06imap: Tidied up the APPEND and final APPEND response functionsSteve Holme
Removed unnecessary state changes on failure and setting of result codes on success.
2013-03-06imap: Tidied up the final FETCH response functionSteve Holme
Removed unnecessary state change on failure and setting of result code on success.
2013-03-06imap: Tidied up the LIST response functionSteve Holme
Reworked comments as they referenced custom commands, removed unnecessary state change on failure and setting of result code on success.
2013-03-06imap: Removed the custom request response functionSteve Holme
Removed imap_state_custom_resp() as imap_state_list_resp() provides the same functionality.
2013-03-06imap: Added check for empty UID in FETCH commandSteve Holme
As the UID has to be specified by the user for the FETCH command to work correctly, added a check to imap_fetch(), although strictly speaking it is protected by the call from imap_perform().
2013-03-06imap: fix compiler warningDaniel Stenberg
imap.c:694:21: error: unused variable 'imapc' [-Werror=unused-variable]
2013-03-05imap: Added support for list commandSteve Holme
2013-03-05imap: Added list perform and response handler functionsSteve Holme
2013-03-05imap: Introduced IMAP_LIST stateSteve Holme
2013-03-05imap: Small tidy up of imap_select() to match imap_append()Steve Holme
Updated the style of imap_select() before adding the LIST command.
2013-03-05imap: Moved mailbox check from the imap_do() functionSteve Holme
In preparation for the addition of the LIST command, moved the mailbox check from imap_do() to imap_select() and imap_append().
2013-03-03imap: Added comments to imap_append()Steve Holme
2013-03-03imap: Added required mailbox check for FETCH and APPEND commandsJiri Hruska
2013-03-03imap: Fixed typo in variable assignmentSteve Holme
2013-03-03imap: Fixed custom request handling in imap_done()Jiri Hruska
Fixed imap_done() so that neither the FINAL states are not entered when a custom command has been performed.