aboutsummaryrefslogtreecommitdiff
path: root/lib/multi.c
AgeCommit message (Collapse)Author
2008-09-13fix compiler warning: external declaration in primary source fileYang Tse
2008-09-10Checked in some code improvements and minor fixes that I discovered in theDan Fandrich
FreeBSD ports system.
2008-09-08Dmitry Kurochkin fixed pipelining over proxy using the multi interfaceDaniel Stenberg
2008-09-06remove unnecessary typecasting of malloc()Yang Tse
2008-09-06remove unnecessary typecasting of calloc()Yang Tse
2008-08-23- Constantine Sapuntzakis fixed a bug when doing proxy CONNECT with the multiDaniel Stenberg
interface, and the proxy would send Connection: close during the authentication phase. http://curl.haxx.se/bug/view.cgi?id=2069047
2008-08-08Fixed an uninitialized variable in multi_runsingle() that could cause aDan Fandrich
request to prematurely end.
2008-06-19- Christopher Palow fixed a curl_multi_socket() issue which previous causedDaniel Stenberg
libcurl to not tell the app properly when a socket was closed (when the name resolve done by c-ares is done) and then immediately re-created and put to use again (for the actual connection). Since the closure will make the "watch status" get lost in several event-based systems libcurl will need to tell the app about this close/re-create case.
2008-06-13In checkPendPipeline() we can't be setting the TIMER_CONNECT correctly as thatDaniel Stenberg
is for the TCP connect. I changed it to TIMER_PRETRANSFER which seems to be what was intended here.
2008-05-28- Emil Romanus found a problem and helped me repeat it. It occured when usingDaniel Stenberg
the curl_multi_socket() API with HTTP pipelining enabled and could lead to the pipeline basically stalling for a very long period of time until it took off again.
2008-05-19with pipelining disabled, the state should never be set to WAITDO but ratherDaniel Stenberg
go straight to DO we had multiple states for which the internal function returned no socket at all to wait for, with the effect that libcurl calls the socket callback (when curl_multi_socket() is used) with REMOVE prematurely (as it would be added again within very shortly)
2008-05-09- Stefan Krause reported a busy-looping case when using the multi interfaceDaniel Stenberg
and doing CONNECT to a proxy. The app would then busy-loop until the proxy completed its response.
2008-05-07Christopher Palow provided the patch (edited by me) that introducesYang Tse
the use of microsecond resolution keys for internal splay trees. http://curl.haxx.se/mail/lib-2008-04/0513.html
2008-04-30- To make it easier for applications that want lots of magic stuff done onDaniel Stenberg
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now introduce the new CURLINFO_REDIRECT_URL option that lets applications extract the URL libcurl would've redirected to if it had been told to. This then enables the application to continue to that URL as it thinks is suitable, without having to re-implement the magic of creating the new URL from the Location: header etc. Test 1029 verifies it.
2008-03-18- Added curl_easy_getinfo typechecker.Michal Marek
- Added macros for curl_share_setopt and curl_multi_setopt to check at least the correct number of arguments.
2008-02-20- We no longer support setting the CURLOPT_URL option from inside a callbackDaniel Stenberg
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location: following. The patch that introduced this feature was done for 7.11.0, but this code and functionality has been broken since about 7.15.4 (March 2006) with the introduction of non-blocking OpenSSL "connects". It was a hack to begin with and since it doesn't work and hasn't worked correctly for a long time and nobody has even noticed, I consider it a very suitable subject for plain removal. And so it was done.
2008-02-17added a comment about the ignoring of the Curl_done() return codeDaniel Stenberg
2008-02-03- Dmitry Kurochkin cleaned up the pipelining code and removed the need for andDaniel Stenberg
use of the "is_in_pipeline" struct field.
2008-01-27Dmitry Kurochkin: In "real world" testing I found more bugs inDaniel Stenberg
pipelining. Broken connection is not restored and we get into infinite loop. It happens because of wrong is_in_pipeline values.
2008-01-23Dmitry Kurochkin's pipelining close-down segfault fixDaniel Stenberg
2008-01-21Dmitry Kurochkin removed the cancelled state for pipelining, as we agreedDaniel Stenberg
that it is bad anyway. Starting now, removing a handle that is in used in a pipeline will break the pipeline - it'll be set back up again but still...
2008-01-18Lau Hang Kin found and fixed a problem with the multi interface when doingDaniel Stenberg
CONNECT over a proxy. curl_multi_fdset() didn't report back the socket properly during that state, due to a missing case in the switch in the multi_getsock() function.
2008-01-16Dmitry Kurochkin's additional pipelining bugfixDaniel Stenberg
2008-01-16Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support thatDaniel Stenberg
previously had a number of flaws, perhaps most notably when an application fired up N transfers at once as then they wouldn't pipeline at all that nicely as anyone would think... Test case 530 was also updated to take the improved functionality into account.
2008-01-08Introducing curl_easy_pause() and new magic return codes for both the readDaniel Stenberg
and the write callbacks that now can make a connection's reading and/or writing get paused.
2007-11-24struct HandleData is now called struct SingleRequest, and is only for data thatDaniel Stenberg
is inited at the start of the DO action. I removed the Curl_transfer_keeper struct completely, and I had to move out a few struct members (that had to be set before DO or used after DONE) to the UrlState struct. The SingleRequest struct is accessed with SessionHandle->req. One of the biggest reasons for doing this was the bunch of duplicate struct members in HandleData and Curl_transfer_keeper since it was really messy to keep track of two variables with the same name and basically the same purpose!
2007-11-15Rearranged code and changed Curl_readwrite_init() and Curl_pre_readwrite() intoDaniel Stenberg
do_init() and do_complete() which now are called first and last in the DO function. It simplified the flow in multi.c and the functions got more sensible names!
2007-11-05removed space after if and while before the parenthesis for better source codeDaniel Stenberg
consistency
2007-11-03make sure the code deals with failures on the DO_MORE state properlyDaniel Stenberg
2007-09-27Enabled a few more gcc warnings with --enable-debug. Renamed a fewDan Fandrich
variables to avoid shadowing global declarations.
2007-08-31Fixed an invalid returned error code added in my last submission.Dan Fandrich
2007-08-30Fixed a few compiler warnings. Try to do a slightly better job ofDan Fandrich
cleaning up after an OOM condition in curl_multi_add_handle
2007-08-26Fixed some minor mismatched types found by splint.Dan Fandrich
2007-06-26Robert Iakobashvili re-arranged the internal hash code to work with a customDaniel Stenberg
hash function for different hashes, and also expanded the default size for the socket hash table used in multi handles to greatly enhance speed when very many connections are added and the socket API is used.
2007-06-14Shmulik Regev fixed a flaw in the multi interface that occurred when doingDaniel Stenberg
HTTP CONNECT over a proxy
2007-06-01ouch, two conditionals were turned backwards!Daniel Stenberg
2007-06-01do the update timer stuff even when CURLM_CALL_MULTI_PERFORM is returnedDaniel Stenberg
2007-05-30Added CURLMOPT_MAXCONNECTS which is a curl_multi_setopt() option for settingDaniel Stenberg
the maximum size of the connection cache maximum size of the multi handle.
2007-05-07James Bursa fixed a bug in the multi handle code that made the connectionDaniel Stenberg
cache grow a bit too much, beyond the normal 4 * easy_handles.
2007-05-02Fixed an out of memory handling issue with HTTP pipelines.Dan Fandrich
2007-05-02- Set the timeout for easy handles to expire really soon after addition orDaniel Stenberg
when CURLM_CALL_MULTI_PERFORM is returned from curl_multi_socket*/perform, to make applications using only curl_multi_socket() to properly function when adding easy handles "on the fly". Bug report and test app provided by Michael Wallner.
2007-04-16- Robert Iakobashvil added curl_multi_socket_action() to libcurl, which is aDaniel Stenberg
function that deprecates the curl_multi_socket() function. Using the new function the application tell libcurl what action that was found in the socket that it passes in. This gives a significant performance boost as it allows libcurl to avoid a call to poll()/select() for every call to curl_multi_socket*().
2007-04-13fix compiler warningYang Tse
2007-04-10Ravi Pratap provided fixes for HTTP pipeliningDaniel Stenberg
2007-04-07fix out of memory handling issueYang Tse
2007-04-01Robert Iakobashvili made curl_multi_remove_handle() a lot faster when manyDaniel Stenberg
easy handles are added to a multi handle, by avoiding the looping over all the handles to find which one to remove.
2007-03-31Check for a NULL easy->easy_conn in multi_getsock() since it can in factDaniel Stenberg
happen when curl_multi_remove_handle() is called. CID 13. coverity.com scan
2007-03-25- Daniel Johnson fixed multi code to traverse the easy handle list properly.Daniel Stenberg
A left-over bug from the February 21 fix.
2007-03-23add missing state name for the debug state switch outputDaniel Stenberg
2007-03-01Do not remove CURLM_STATE_WAITPROXYCONNECT from the CURLMstate enumYang Tse
in builds with HTTP support disabled to keep consistent enum values for CURLMstate in all kind of builds.