aboutsummaryrefslogtreecommitdiff
path: root/lib/multi.c
AgeCommit message (Collapse)Author
2016-03-13multi_runsingle: avoid loop in CURLM_STATE_WAITPROXYCONNECTMaksim Kuzevanov
Closes #703
2016-03-10curl_multi_wait: never return -1 in 'numfds'Daniel Stenberg
Such a return value isn't documented but could still happen, and the curl tool code checks for it. It would happen when the underlying Curl_poll() function returns an error. Starting now we mask that error as a user of curl_multi_wait() would have no way to handle it anyway. Reported-by: Jay Satiro Closes #707
2016-02-23multi_remove_handle: keep the timeout list until after disconnectDaniel Stenberg
The internal Curl_done() function uses Curl_expire() at times and that uses the timeout list. Better clean up the list once we're done using it. This caused a segfault. Reported-by: 蔡文凱 Bug: https://curl.haxx.se/mail/lib-2016-02/0097.html
2016-02-03URLs: change all http:// URLs to https://Daniel Stenberg
2015-10-16multi: fix off-by-one finit[] array sizeDaniel Stenberg
introduced in c6aedf680f6. It needs to be CURLM_STATE_LAST big since it must hande the range 0 .. CURLM_STATE_MSGSENT (18) and CURLM_STATE_LAST is 19 right now. Reported-by: Dan Fandrich Bug: http://curl.haxx.se/mail/lib-2015-10/0069.html
2015-10-15fread_func: move callback pointer from set to state structDaniel Stenberg
... and assign it from the set.fread_func_set pointer in the Curl_init_CONNECT function. This A) avoids that we have code that assigns fields in the 'set' struct (which we always knew was bad) and more importantly B) it makes it impossibly to accidentally leave the wrong value for when the handle is re-used etc. Introducing a state-init functionality in multi.c, so that we can set a specific function to get called when we enter a state. The Curl_init_CONNECT is thus called when switching to the CONNECT state. Bug: https://github.com/bagder/curl/issues/346 Closes #346
2015-06-24http2: init the pushed transfer properlyDaniel Stenberg
2015-06-24http2: setup the new pushed stream properlyDaniel Stenberg
2015-06-24http2: initial implementation of the push callbackDaniel Stenberg
2015-06-23pretransfer: init state.infilesize here, not in add_handleDaniel Stenberg
... to properly support that options are set to the handle after it is added to the multi handle. Bug: http://curl.haxx.se/mail/lib-2015-06/0122.html Reported-by: Stefan Bühler
2015-06-14urldata: store POST size in state.infilesize tooDaniel Stenberg
... to simplify checking when PUT _or_ POST have completed. Reported-by: Frank Meier Bug: http://curl.haxx.se/mail/lib-2015-06/0019.html
2015-06-10debug: remove http2 debug leftoversDaniel Stenberg
2015-05-20read_callback: move to SessionHandle from connectdataDaniel Stenberg
With many easy handles using the same connection for multiplexing, it is important we store and keep the transfer-oriented stuff in the SessionHandle so that callbacks and callback data work fine even when many easy handles share the same physical connection.
2015-05-19transfer: Replace __func__ instances with function nameJay Satiro
.. also make __func__ replacement in multi. Prior to this change debug builds would fail to build if the compiler was building pre-c99 and didn't support __func__.
2015-05-18hostip: fix unintended destruction of hash tableAnthony Avina
.. and added unit1602 for hash.c
2015-05-18pipeline: switch some code over to functionsDaniel Stenberg
... to "compartmentalize" a bit and make it easier to change behavior when multiplexing is used instead of good old pipelining.
2015-05-18http2: set default concurrency, fix ConnectionExists for multiplexDaniel Stenberg
2015-05-18bundles: store no/default/pipeline/multiplexDaniel Stenberg
to allow code to act differently on the situation. Also added some more info message for the connection re-use function to make it clearer when connections are not re-used.
2015-05-18http2: separate multiplex/pipelining + cleanup memory leaksDaniel Stenberg
2015-05-18CURLMOPT_PIPELINE: bit 1 is for multiplexingDaniel Stenberg
2015-05-18http2: leave WAITPERFORM when conn is multiplexedDaniel Stenberg
No need to wait for our "spot" like for pipelining
2015-05-18http2: force "drainage" of streamsDaniel Stenberg
... which is necessary since the socket won't be readable but there is data waiting in the buffer.
2015-05-12bundles: merged into conncache.cDaniel Stenberg
All the existing Curl_bundle* functions were only ever used from within the conncache.c file, so I moved them over and made them static (and removed the Curl_ prefix).
2015-05-12hostcache: made all host caches use structs, not pointersDaniel Stenberg
This avoids unnecessary dynamic allocs and as this also removed the last users of *hash_alloc() and *hash_destroy(), those two functions are now removed.
2015-05-12multi: converted socket hash into non-allocated structDaniel Stenberg
avoids extra dynamic allocation
2015-05-12connection cache: avoid Curl_hash_alloc()Daniel Stenberg
... by using plain structs instead of pointers for the connection cache, we can avoid several dynamic allocations that weren't necessary.
2015-04-30curl_multi_add_handle: next is already NULLAnders Bakken
2015-04-03move Curl_share_lock and ref counting into Curl_fetch_addrStefan Bühler
2015-03-29multi: remove_handle: move pending connectionsDaniel Stenberg
If the handle removed from the multi handle happens to be the one "owning" the pipeline other transfers will be waiting indefinitely. Now we move such handles back to connect to have them race (again) for getting the connection and thus avoid hanging. Bug: http://curl.haxx.se/bug/view.cgi?id=1465 Reported-by: Jiri Dvorak
2015-03-26multi: on a request completion, check all CONNECT_PEND transfersDaniel Stenberg
... even if they don't have an associated connection anymore. It could leave the waiting transfers pending with no active one on the connection. Bug: http://curl.haxx.se/bug/view.cgi?id=1465 Reported-by: Jiri Dvorak
2015-03-17Curl_sh_entry: remove unused 'timestamp'Stefan Bühler
2015-03-17checksrc: use space after commaDaniel Stenberg
2015-03-16free: instead of Curl_safefree()Daniel Stenberg
Since we just started make use of free(NULL) in order to simplify code, this change takes it a step further and: - converts lots of Curl_safefree() calls to good old free() - makes Curl_safefree() not check the pointer before free() The (new) rule of thumb is: if you really want a function call that frees a pointer and then assigns it to NULL, then use Curl_safefree(). But we will prefer just using free() from now on.
2015-03-16Bug #149: Deletion of unnecessary checks before calls of the function "free"Markus Elfring
The function "free" is documented in the way that no action shall occur for a passed null pointer. It is therefore not needed that a function caller repeats a corresponding check. http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-07multi: fix *getsock() with CONNECTDaniel Stenberg
The code used some happy eyeballs logic even _after_ CONNECT has been sent to a proxy, while the happy eyeball phase is already (should be) over by then. This is solved by splitting the multi state into two separate states introducing the new SENDPROTOCONNECT state. Bug: http://curl.haxx.se/mail/lib-2015-01/0170.html Reported-by: Peter Laser
2015-03-05multi: fix memory-leak on timeout (regression)Daniel Stenberg
Since 1342a96ecfe0d44, a timeout detected in the multi state machine didn't necesarily clear everything up, like formpost data. Bug: https://github.com/bagder/curl/issues/147 Reported-by: Michel Promonet Patched-by: Michel Promonet
2015-03-03mprintf.h: remove #ifdef CURLDEBUGDaniel Stenberg
... and as a consequence, introduce curl_printf.h with that re-define magic instead and make all libcurl code use that instead.
2015-01-07hostip: remove 'stale' argument from Curl_fetch_addr protoDaniel Stenberg
Also, remove the log output of the resolved name is NOT in the cache in the spirit of only telling when something is actually happening.
2014-12-05multi.c: Fixed compilation warningSteve Holme
multi.c:2695: warning: declaration of `exp' shadows a global declaration
2014-11-23multi.c: Fixed compilation warnings when no verbose string supportSteve Holme
warning: variable 'connection_id' set but not used warning: unused parameter 'lineno'
2014-11-19multi: inform about closed sockets before they are closedJon Spencer
When the connection code decides to close a socket it informs the multi system via the Curl_multi_closed function. The multi system may, in turn, invoke the CURLMOPT_SOCKETFUNCTION function with CURL_POLL_REMOVE. This happens after the socket has already been closed. Reorder the code so that CURL_POLL_REMOVE is called before the socket is closed.
2014-11-18debug: added new connection cache output, plus fixupsCarlo Wood
Debug output 'typo' fix. Don't print an extra "0x" in * Pipe broke: handle 0x0x2546d88, url = / Add debug output. Print the number of connections in the connection cache when adding one, and not only when one is removed. Fix typos in comments.
2014-11-18multi: move the ending condition into the loop as wellDaniel Stenberg
... as it was before I changed the loop in commit e04ccbd50. It caused test 2030 and 2032 to fail.
2014-11-18multi: Prefer we don't use CURLE_OK and NULL in comparisonsSteve Holme
2014-11-18multi_runsingle: use 'result' for local CURLcode storageDaniel Stenberg
... and assign data->result only at the end. Makes the code more compact (easier to read) and more similar to other code.
2014-11-18multi_runsingle: rename result to rcDaniel Stenberg
save 'result' for CURLcode types
2014-11-18multi: make multi_runsingle loop internallyDaniel Stenberg
simplifies the use of this function at little cost.
2014-11-18multi: when leaving for timeout, close accordinglyCarlo Wood
Fixes the problem when a transfer in a pipeline times out.
2014-11-10multi: removed Curl_multi_set_easy_connectionDaniel Stenberg
It isn't used anywhere! Reported-by: Carlo Wood
2014-10-24code cleanup: we prefer 'CURLcode result'Daniel Stenberg
... for the local variable name in functions holding the return code. Using the same name universally makes code easier to read and follow. Also, unify code for checking for CURLcode errors with: if(result) or if(!result) instead of if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 11:48:40 +0000