aboutsummaryrefslogtreecommitdiff
path: root/lib/smtp.c
AgeCommit message (Collapse)Author
2013-11-17smtp:Fixed memory leak from commit dac01ff6d788b2Steve Holme
The buffer allocated by smtp_parse_custom_request() was not freed.
2013-11-15smtp: Fixed broken RCPT TO from commit 0ea4a80bb23666Steve Holme
2013-11-15smtp_state_mail_resp: removed unused variable 'smtp'Daniel Stenberg
2013-11-15smtp: Simplified the next RCPT TO logicSteve Holme
2013-11-15smtp.c: Fixed trailing whitespaceSteve Holme
2013-11-15smtp: Added support for VRFY and EXPN commandsSteve Holme
2013-11-15smtp: Added support for NOOP and RSET commandsSteve Holme
2013-11-15smtp: Fixed handling of multiline server greeting responsesSteve Holme
Incorrectly processed multiline server greeting responses as "wanted" continue responses in smtp_endofresp(), from commit f16c0de4e9bbe3, which in turn broke the SMTP server detection in the test suite, because the EHLO command would not be sent.
2013-11-15smtp.c: Fixed compilation error from commit f16c0de4e9bbe3Steve Holme
warning: unused variable 'smtpc'
2013-11-15smtp: Fixed processing of more than one response when sent in same packetSteve Holme
Added a loop to smtp_statemach_act() in which Curl_pp_readresp() is called until the cache is drained. Without this multiple responses received in a single packet could result in a hang or delay.
2013-11-15smtp: Moved EHLO response handling to smtp_state_ehlo_resp()Steve Holme
Similar to the processing of untagged CAPABILITY responses in IMAP moved the processing of multiline EHLO responses to smtp_state_ehlo_resp() and introduced an internal response code of one to differentiate a multiline continuation from the end of command. This also allows for the separate processing of multiline responses from commands such as VRFY and EXPN.
2013-10-30email: Corrected a couple of typos from commit aa0eaef4838ccdSteve Holme
2013-10-30email: Post graceful SASL authentication cancellation tidy upSteve Holme
2013-10-27email: Added support for cancelling NTLM authenticationSteve Holme
2013-10-27email: Added support for cancelling DIGEST-MD5 authenticationSteve Holme
2013-10-27email: Corrected a couple of typos from 1e39b95682781fSteve Holme
2013-10-27email: Added support for canceling CRAM-MD5 authenticationSteve Holme
2013-10-27email: Added initial support for cancelling authenticationSteve Holme
Should a client application fail to decode an authentication message received from a server, or not support any of the parameters given by the server in the message, then the authentication phrase should be cancelled gracefully by the client rather than simply terminating the connection. The authentication phrase should be cancelled by simply sending a '*' to the server, in response to erroneous data being received, as per RFC-3501, RFC-4954 and RFC-5034. This patch adds the necessary state machine constants and appropriate response handlers in order to add this functionality for the CRAM-MD5, DIGEST-MD5 and NTLM authentication mechanisms.
2013-10-27email: Moved authentication message parsing into a separate functionSteve Holme
...in preparation for upcoming modifications.
2013-10-26email: Added references to SASL LOGIN authentication draft proposalSteve Holme
2013-10-26smtp: Fixed response code parsing for bad AUTH continuation responsesSteve Holme
This workaround had been previously been implemented for IMAP and POP3 but not SMTP. Some of the recent test case additions implemented this behaviour to emulate a bad server and the SMTP code didn't cope with it.
2013-10-18email: Fixed QUIT / LOGOUT being sent when SSL connect failsSteve Holme
2013-09-24sasl: Centralised the authentication mechanism stringsSteve Holme
Moved the standard SASL mechanism strings into curl_sasl.h rather than hard coding the same values over and over again in the protocols that use SASL authentication. For more information about the mechanism strings see: http://www.iana.org/assignments/sasl-mechanisms
2013-09-10imap/pop3/smtp: Speed up SSL connection initializationJiri Hruska
Don't wait for the next callback call (usually 1 second) before continuing with protocol specific connection initialization.
2013-09-04SASL: fix compiler warningsDaniel Stenberg
comparison between signed and unsigned integer expressions suggest parentheses around '&&' within '||' (twice)
2013-09-04imap/smtp: Fixed incorrect SASL mechanism selection with XOAUTH2 serversSteve Holme
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP or SMTP server advertised support for it even though a user's password was supplied but bearer token wasn't. Modified the selection logic so that XOAUTH2 will only be selected if the server supports it and A) The curl user/libcurl programmer has specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2) The bearer token is specified. Obviously if XOAUTH is asked for via the login option but no token is specified the user will receive a authentication failure which makes more sense than no known authentication mechanisms supported!
2013-08-26smtp: added basic SASL XOAUTH2 supportKyle L. Huff
Added the ability to use an XOAUTH2 bearer token [RFC6750] with SMTP for authentication using RFC6749 "OAuth 2.0 Authorization Framework". The bearer token is expected to be valid for the user specified in conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has an advertised auth mechanism of "XOAUTH2", the user and access token are formatted as a base64 encoded string and sent to the server as "AUTH XOAUTH2 <bearer token>".
2013-08-12SessionHandle: the protocol specific pointer is now a void *Daniel Stenberg
All protocol handler structs are now opaque (void *) in the SessionHandle struct and moved in the request-specific sub-struct 'SingleRequest'. The intension is to keep the protocol specific knowledge in their own dedicated source files [protocol].c etc. There's some "leakage" where this policy is violated, to be addressed at a later point in time.
2013-08-12urldata: clean up the use of the protocol specific structsDaniel Stenberg
1 - always allocate the struct in protocol->setup_connection. Some protocol handlers had to get this function added. 2 - always free at the end of a request. This is also an attempt to keep less memory in the handle after it is completed.
2013-08-09comments: remove old and wrong multi/easy interface statementsDaniel Stenberg
2013-07-24string formatting: fix zero-length printf format stringYang Tse
2013-07-24string formatting: fix 25+ printf-style format stringsYang Tse
2013-05-04smtp: Fix trailing whitespace warningSteve Holme
2013-05-04smtp: Fix compilation warningSteve Holme
comparison between signed and unsigned integer expressions
2013-05-04smtp: Updated RFC-2821 references to RFC-5321Steve Holme
2013-05-04smtp: Fixed sending of double CRLF caused by first in EOBSteve Holme
If the mail sent during the transfer contains a terminating <CRLF> then we should not send the first <CRLF> of the EOB as specified in RFC-5321. Additionally don't send the <CRLF> if there is "no mail data" as the DATA command already includes it.
2013-04-30smtp: Tidy up to move the eob counter to the per-request structureSteve Holme
Move the eob counter from the smtp_conn structure to the SMTP structure as it is associated with a SMTP payload on a per-request basis.
2013-04-29smtp: Fixed unknown percentage complete in progress barSteve Holme
The curl command line utility would display the the completed progress bar with a percentage of zero as the progress routines didn't know the size of the transfer.
2013-04-28email: Tidy up of *_perform_authenticate()Steve Holme
Removed the hard returns from imap and pop3 by using the same style for sending the authentication string as smtp. Moved the "Other mechanisms not supported" check in smtp to match that of imap and pop3 to provide consistency between the three email protocols.
2013-04-28smtp: Updated limit check to be more readable like the check in pop3Steve Holme
2013-04-27smtp: Added support for disabling the SASL initial responseSteve Holme
Updated the default behaviour of sending the client's initial response in the AUTH command to not send it and added support for CURLOPT_SASL_IR to allow the user to specify including the response. Related Bug: http://curl.haxx.se/mail/lib-2012-03/0114.html Reported-by: Gokhan Sengun
2013-04-16smtp: Re-factored all perform based functionsSteve Holme
Standardised the naming of all perform based functions to be in the form smtp_perform_something().
2013-04-16smtp: Added description comments to all perform based functionsSteve Holme
2013-04-16smtp: Moved smtp_quit() to be with the other perform functionsSteve Holme
2013-04-16smtp: Moved smtp_rcpt_to() to be with the other perform functionsSteve Holme
2013-04-16smtp: Moved smtp_mail() to be with the other perform functionsSteve Holme
2013-04-15smtp: Updated the coding style of smtp_state_servergreet_resp()Steve Holme
Updated the coding style, in this function, to be consistant with other response functions rather then performing a hard return on failure.
2013-04-13smtp: Added support for ;auth=<mech> in the URLSteve Holme
Added support for specifying the preferred authentication mechanism in the URL as per Internet-Draft 'draft-earhart-url-smtp-00'.
2013-04-13smtp: Fix compiler warningSteve Holme
warning: unused variable 'smtp' introduced in commit 73cbd21b5ee6.
2013-04-12smtp: Moved parsing of url path into separate functionSteve Holme