| Age | Commit message (Collapse) | Author |
|---|
|
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes #1505
|
|
... to properly use the dynamically set buffer size!
|
|
Fixes #1252
|
|
- Format the numeric denial code as an integer instead of a character.
|
|
|
|
|
|
We had some confusions on when each function was used. We should not act
differently on different locales anyway.
|
|
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
|
|
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
|
|
|
|
|
|
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes #743
|
|
... as it now is used by multi.c only.
|
|
warning C4706: assignment within conditional expression
|
|
Regression since commit 710f14edba.
Bug: https://github.com/curl/curl/issues/422
Reported-by: Justin Ehlert
|
|
|
|
This reverts commit 64e959ffe37c436503f9fed1ce2d6ee6ae50bd9a.
Feedback-by: Dan Fandrich
URL: http://curl.haxx.se/mail/lib-2015-11/0062.html
|
|
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
|
|
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
|
|
... and as a consequence, introduce curl_printf.h with that re-define
magic instead and make all libcurl code use that instead.
|
|
Its use is only enabled by explicit requirement in URL (;AUTH=EXTERNAL) and
by not setting the password.
|
|
|
|
|
|
|
|
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
|
|
smtp.c:2357 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
smtp.c:2375 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
smtp.c:2386 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
Used array index notation instead.
|
|
|
|
If the scratch buffer was allocated in a previous call to
Curl_smtp_escape_eob(), a new buffer not allocated in the subsequent
call and no action taken by that call, then an attempt would be made to
try and free the buffer which, by now, would be part of the data->state
structure.
This bug was introduced in commit 4bd860a001.
|
|
Fixed a problem with the CRLF. detection when multiple buffers were
used to upload an email to libcurl and the line ending character(s)
appeared at the end of each buffer. This meant any lines which started
with . would not be escaped into .. and could be interpreted as the end
of transmission string instead.
This only affected libcurl based applications that used a read function
and wasn't reproducible with the curl command-line tool.
Bug: http://curl.haxx.se/bug/view.cgi?id=1456
Assisted-by: Patrick Monnerat
|
|
...and some comment typos!
|
|
Added support for the automatic conversion of Unix newlines to CRLF
during mail uploads.
Feature: http://curl.haxx.se/bug/view.cgi?id=1456
|
|
For consistency renamed USE_KRB5 to USE_KERBEROS5.
|
|
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
|
|
This patch fixes the "SSL3_WRITE_PENDING: bad write retry" error that
sometimes occurs when sending an email over SMTPS with OpenSSL. OpenSSL
appears to require the same pointer on a write that follows a retry
(CURLE_AGAIN) as discussed here:
http://stackoverflow.com/questions/2997218/why-am-i-getting-error1409f07fssl-routinesssl3-write-pending-bad-write-retr
|
|
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
|
|
|
|
|
|
Under these circumstances, the connection hasn't been fully established
and smtp_connect hasn't been called, yet smtp_done still calls the state
machine which dereferences the NULL conn pointer in struct pingpong.
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
|
|
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
|
|
|
|
In addition to commit fe260b75e7 fixed the same issue for RFC-821 based
SMTP servers and allow the credientials to be given to curl even though
they are not used with the server.
|
|
Specifying user credentials when the SMTP server doesn't support
authentication would cause curl to display "No known authentication
mechanisms supported!" and return CURLE_LOGIN_DENIED.
Reported-by: Tom Sparrow
Bug: http://curl.haxx.se/mail/lib-2014-03/0173.html
|
|
Following commit 0aafd77fa4c6f2, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
|
|
|
|
|
|
|
|
|
|
|
