aboutsummaryrefslogtreecommitdiff
path: root/lib/ssh.c
AgeCommit message (Collapse)Author
2019-07-30cleanup: remove the 'numsocks' argument used in many placesDaniel Stenberg
It was used (intended) to pass in the size of the 'socks' array that is also passed to these functions, but was rarely actually checked/used and the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries that should be used instead. Closes #4169
2019-05-20lib: reduce variable scopesMarcel Raad
Fixes Codacy/CppCheck warnings. Closes https://github.com/curl/curl/pull/3872
2019-05-20ssh: move variable declaration to where it's usedMarcel Raad
This way, we need only one call to free. Closes https://github.com/curl/curl/pull/3873
2019-05-16cleanup: remove FIXME and TODO commentsDaniel Stenberg
They serve very little purpose and mostly just add noise. Most of them have been around for a very long time. I read them all before removing or rephrasing them. Ref: #3876 Closes #3883
2019-03-05ssh: loop the state machine if not done and not blockingDaniel Stenberg
If the state machine isn't complete, didn't fail and it didn't return due to blocking it can just as well loop again. This addresses the problem with SFTP directory listings where we would otherwise return back to the parent and as the multi state machine doesn't have any code for using CURLM_CALL_MULTI_PERFORM for as long the doing phase isn't complete, it would return out when in reality there was more data to deal with. Fixes #3506 Closes #3644
2019-03-01urldata: simplify bytecountersDaniel Stenberg
- no need to have them protocol specific - no need to set pointers to them with the Curl_setup_transfer() call - make Curl_setup_transfer() operate on a transfer pointer, not connection - switch some counters from long to the more proper curl_off_t type Closes #3627
2019-03-01ssh: fix Condition '!status' is always trueDaniel Stenberg
in the same sftp_done function in both SSH backends. Simplify them somewhat. Pointed out by Codacy. Closes #3628
2019-01-17ssh: log the libssh2 error message when ssh session startup failsJDepooter
When a ssh session startup fails, it is useful to know why it has failed. This commit changes the message from: "Failure establishing ssh session" to something like this, for example: "Failure establishing ssh session: -5, Unable to exchange encryption keys" Closes #3481
2018-11-23snprintf: renamed and we now only use msnprintf()Daniel Stenberg
The function does not return the same value as snprintf() normally does, so readers may be mislead into thinking the code works differently than it actually does. A different function name makes this easier to detect. Reported-by: Tomas Hoger Assisted-by: Daniel Gustafsson Fixes #3296 Closes #3297
2018-10-26ssh: free the session on init failuresDaniel Gustafsson
Ensure to clear the session object in case the libssh2 initialization fails. It could be argued that the libssh2 error function should be called to get a proper error message in this case. But since the only error path in libssh2_knownhost_init() is memory a allocation failure it's safest to avoid since the libssh2 error handling allocates memory. Closes #3179 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-09-04sftp: don't send post-qoute sequence when retrying a connectionPrzemysław Tomaszewski
Fixes #2939 Closes #2940
2018-09-01all: s/int/size_t cleanupDaniel Stenberg
Assisted-by: Rikard Falkeborn Closes #2922
2018-08-21curl-compilers: enable -Wimplicit-fallthrough=4 for GCCMarcel Raad
This enables level 4 instead of the default level 3, which of the currently used comments only allows /* FALLTHROUGH */ to silence the warning. Closes https://github.com/curl/curl/pull/2747
2018-06-12Curl_debug: remove dead printhost codeDaniel Stenberg
The struct field is never set (since 5e0d9aea3) so remove the use of it and remove the connectdata pointer from the prototype. Reported-by: Tejas Bug: https://curl.haxx.se/mail/lib-2018-06/0054.html Closes #2647
2018-04-16ssh: show libSSH2 error code when closing failsChristian Schmitz
Closes #2500
2018-02-16ssh: add two missing state namesDaniel Stenberg
The list of state names (used in debug builds) was out of sync in relation to the list of states (used in all builds). I now added an assert to make sure the sizes of the two lists match, to aid in detecting this mistake better in the future. Regression since c92d2e14cf, shipped in 7.58.0. Reported-by: Somnath Kundu Fixes #2312 Closes #2313
2018-02-15TODO fixed: Detect when called from within callbacksBjörn Stenberg
Closes #2302
2018-02-01time_t-fixes: remove typecasts to 'long' for info.filetimeDaniel Stenberg
They're now wrong. Reported-by: Michael Kaufmann Closes #2277
2018-01-18SSH: Fix state machine for ssh-agent authenticationMichael Gmelin
In case an identity didn't match[0], the state machine would fail in state SSH_AUTH_AGENT instead of progressing to the next identity in ssh-agent. As a result, ssh-agent authentication only worked if the identity required happened to be the first added to ssh-agent. This was introduced as part of commit c4eb10e2f06fbd6cc904f1d78e4, which stated that the "else" statement was required to prevent getting stuck in state SSH_AUTH_AGENT. Given the state machine's logic and libssh2's interface I couldn't see how this could happen or reproduce it and I also couldn't find a more detailed description of the problem which would explain a test case to reproduce the problem this was supposed to fix. [0] libssh2_agent_userauth returning LIBSSH2_ERROR_AUTHENTICATION_FAILED Closes #2248
2018-01-05build: remove HAVE_LIMITS_H checkJay Satiro
.. because limits.h presence isn't optional, it's required by C89. Ref: http://port70.net/~nsz/c/c89/c89-draft.html#2.2.4.2 Closes https://github.com/curl/curl/pull/2215
2017-12-09sftp: allow quoted commands to use relative pathsJohn DeHelian
Closes #1900
2017-12-04libssh2: remove dead code from SSH_SFTP_QUOTEDaniel Stenberg
Figured out while reviewing code in the libssh backend. The pointer was checked for NULL after having been dereferenced, so we know it would always equal true or it would've crashed. Pointed-out-by: Nikos Mavrogiannopoulos Bug #2143 Closes #2148
2017-12-01libssh2: return CURLE_UPLOAD_FAILED on failure to uploadNikos Mavrogiannopoulos
This brings its in sync with the error code returned by the libssh backend. Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
2017-12-01libssh2: send the correct CURLE error code on scp file not foundNikos Mavrogiannopoulos
That also updates tests to expect the right error code libssh2 back-end returns CURLE_SSH error if the remote file is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND which is sent by the libssh backend. Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
2017-12-01Added support for libssh SSH SCP back-endNikos Mavrogiannopoulos
libssh is an alternative library to libssh2. https://www.libssh.org/ That patch set also introduces support for ECDSA ed25519 keys, as well as gssapi authentication. Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
2017-11-25ssh: remove check for a NULL pointer (!)Daniel Stenberg
With this check present, scan-build warns that we might dereference this point in other places where it isn't first checked for NULL. Thus, if it *can* be NULL we have a problem on a few places. However, this pointer should not be possible to be NULL here so I remove the check and thus also three different scan-build warnings. Closes #2111
2017-10-28Curl_timeleft: change return type to timediff_tDaniel Stenberg
returning 'time_t' is problematic when that type is unsigned and we return values less than zero to signal "already expired", used in several places in the code. Closes #2021
2017-10-25time: rename Curl_tvnow to Curl_nowDaniel Stenberg
... since the 'tv' stood for timeval and this function does not return a timeval struct anymore. Also, cleaned up the Curl_timediff*() functions to avoid typecasts and clean up the descriptive comments. Closes #2011
2017-09-11code style: use spaces around plusesDaniel Stenberg
2017-09-11code style: use spaces around equals signsDaniel Stenberg
2017-08-17ssh: add the ability to enable compression (for SCP/SFTP)Viktor Szakats
The required low-level logic was already available as part of `libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1] option.) This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION` (boolean) and the new `curl` command-line option `--compressed-ssh` to request this `libssh2` feature. To have compression enabled, it is required that the SSH server supports a (zlib) compatible compression method and that `libssh2` was built with `zlib` support enabled. [1] https://www.libssh2.org/libssh2_session_flag.html Ref: https://github.com/curl/curl/issues/1732 Closes https://github.com/curl/curl/pull/1735
2017-08-14strtoofft: reduce integer overflow risks globallyDaniel Stenberg
... make sure we bail out on overflows. Reported-by: Brian Carpenter Closes #1758
2017-07-28timeval: struct curltime is a struct timeval replacementDaniel Stenberg
... to make all libcurl internals able to use the same data types for the struct members. The timeval struct differs subtly on several platforms so it makes it cumbersome to use everywhere. Ref: #1652 Closes #1693
2017-06-30handler: refactor connection checkingMax Dymond
Add a new type of callback to Curl_handler which performs checks on the connection. Alter RTSP so that it uses this callback to do its own check on connection health.
2017-05-25ssh: fix 'left' may be used uninitializedDaniel Stenberg
follow-up to f31760e63b4e Reported-by: Michael Kaufmann Bug: https://github.com/curl/curl/pull/1495#issuecomment-303982793
2017-05-20ssh: ignore timeouts during disconnectDaniel Stenberg
... as otherwise it risks not cleaning up the libssh2 handle properly which leads to memory leak! Assisted-by: Joel Depooter Closes #1495 Closes #1479 Bug: https://curl.haxx.se/mail/lib-2017-04/0024.html
2017-05-10multi: use a fixed array of timers instead of mallocDaniel Stenberg
... since the total amount is low this is faster, easier and reduces memory overhead. Also, Curl_expire_done() can now mark an expire timeout as done so that it never times out. Closes #1472
2017-05-02ssh: fix compiler warning from e40e9d7f0deDaniel Stenberg
2017-05-01buffer: use data->set.buffer_size instead of BUFSIZEDaniel Stenberg
... to properly use the dynamically set buffer size!
2017-03-30ssh: fix narrowing conversion warningMarcel Raad
'left' is used as time_t but declared as long. MinGW complains: error: conversion to 'long int' from 'time_t {aka long long int}' may alter its value [-Werror=conversion] Changed the declaration to time_t.
2017-03-13Improve code readbilitySylvestre Ledru
... by removing the else branch after a return, break or continue. Closes #1310
2017-02-20sftp: improved checks for create dir failuresJean Gressmann
Since negative values are errors and not only -1. This makes SFTP upload with --create-dirs work (again). Closes #1269
2016-12-20ssh: inhibit coverity warning with (void)Daniel Stenberg
CID 1397391 (#1 of 1): Unchecked return value (CHECKED_RETURN)
2016-12-14checksrc: warn for assignments within if() expressionsDaniel Stenberg
... they're already frowned upon in our source code style guide, this now enforces the rule harder.
2016-12-13checksrc: stricter no-space-before-paren enforcementDaniel Stenberg
In order to make the code style more uniform everywhere
2016-11-24proxy: Support HTTPS proxy and SOCKS+HTTP(s)Alex Rousskov
* HTTPS proxies: An HTTPS proxy receives all transactions over an SSL/TLS connection. Once a secure connection with the proxy is established, the user agent uses the proxy as usual, including sending CONNECT requests to instruct the proxy to establish a [usually secure] TCP tunnel with an origin server. HTTPS proxies protect nearly all aspects of user-proxy communications as opposed to HTTP proxies that receive all requests (including CONNECT requests) in vulnerable clear text. With HTTPS proxies, it is possible to have two concurrent _nested_ SSL/TLS sessions: the "outer" one between the user agent and the proxy and the "inner" one between the user agent and the origin server (through the proxy). This change adds supports for such nested sessions as well. A secure connection with a proxy requires its own set of the usual SSL options (their actual descriptions differ and need polishing, see TODO): --proxy-cacert FILE CA certificate to verify peer against --proxy-capath DIR CA directory to verify peer against --proxy-cert CERT[:PASSWD] Client certificate file and password --proxy-cert-type TYPE Certificate file type (DER/PEM/ENG) --proxy-ciphers LIST SSL ciphers to use --proxy-crlfile FILE Get a CRL list in PEM format from the file --proxy-insecure Allow connections to proxies with bad certs --proxy-key KEY Private key file name --proxy-key-type TYPE Private key file type (DER/PEM/ENG) --proxy-pass PASS Pass phrase for the private key --proxy-ssl-allow-beast Allow security flaw to improve interop --proxy-sslv2 Use SSLv2 --proxy-sslv3 Use SSLv3 --proxy-tlsv1 Use TLSv1 --proxy-tlsuser USER TLS username --proxy-tlspassword STRING TLS password --proxy-tlsauthtype STRING TLS authentication type (default SRP) All --proxy-foo options are independent from their --foo counterparts, except --proxy-crlfile which defaults to --crlfile and --proxy-capath which defaults to --capath. Curl now also supports %{proxy_ssl_verify_result} --write-out variable, similar to the existing %{ssl_verify_result} variable. Supported backends: OpenSSL, GnuTLS, and NSS. * A SOCKS proxy + HTTP/HTTPS proxy combination: If both --socks* and --proxy options are given, Curl first connects to the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy. TODO: Update documentation for the new APIs and --proxy-* options. Look for "Added in 7.XXX" marks.
2016-11-11realloc: use Curl_saferealloc to avoid common mistakesDaniel Stenberg
Discussed: https://curl.haxx.se/mail/lib-2016-11/0087.html
2016-11-07ssh: check md5 fingerprints case insensitively (regression)Daniel Stenberg
Revert the change from ce8d09483eea but use the new function Reported-by: Kamil Dudka Bug: https://github.com/curl/curl/commit/ce8d09483eea2fcb1b50e323e1a8ed1f3613b2e3#commitcomment-19666146
2016-10-31strcasecompare: all case insensitive string compares ignore locale nowDaniel Stenberg
We had some confusions on when each function was used. We should not act differently on different locales anyway.
2016-10-31strcasecompare: is the new name for strequal()Daniel Stenberg
... to make it less likely that we forget that the function actually does case insentive compares. Also replaced several invokes of the function with a plain strcmp when case sensitivity is not an issue (like comparing with "-").
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 09:59:02 +0000