| Age | Commit message (Collapse) | Author |
|---|
|
The factor of 8 is a bytes-to-bits conversion factor, but pkt_size and
rate_bps are both in bytes. When using the rate limiting option, curl
waits 8 times too long, and then transfers very quickly until the
average rate reaches the limit. The average rate follows the limit over
time, but the actual traffic is bursty.
Thanks-to: Benjamin Gilbert
|
|
This header file must be included after all header files except
memdebug.h, as it does similar memory function redefinitions and can be
similarly affected by conflicting definitions in system or dependent
library headers.
|
|
|
|
|
|
... and as a consequence, introduce curl_printf.h with that re-define
magic instead and make all libcurl code use that instead.
|
|
Reported-by: Mohammad AlSaleh
Bug: http://curl.haxx.se/mail/lib-2015-01/0065.html
|
|
Prefer ! rather than NULL in if statements, added comments and updated
function spacing, argument spacing and line spacing to be more readble.
|
|
If the scratch buffer already existed when the CRLF conversion was
performed then the buffer pointer would be checked twice for NULL. This
second check is only necessary if the call to malloc() was performed by
the first check.
|
|
Whilst I had moved the dot stuffing code from being performed before
CRLF conversion takes place to after it, in commit 4bd860a001, I had
moved it outside the 'when something read' block of code when meant
it could perform the dot stuffing twice on partial send if nread
happened to contain the right values. It also meant the function could
potentially read past the end of buffer. This was highlighted by the
following warning:
warning: `nread' might be used uninitialized in this function
|
|
Added support for the automatic conversion of Unix newlines to CRLF
during mail uploads.
Feature: http://curl.haxx.se/bug/view.cgi?id=1456
|
|
The previous condition that checked if the socket was marked as readable
when also adding a writable one, was incorrect and didn't take the pause
bits properly into account.
|
|
Basically since servers often then don't respond well to this and
instead send the full contents and then libcurl would instead error out
with the assumption that the server doesn't support resume. As the data
is then already transfered, this is now considered fine.
Test case 1434 added to verify this. Test case 1042 slightly modified.
Reported-by: hugo
Bug: http://curl.haxx.se/bug/view.cgi?id=1443
|
|
Its last use has been removed by the previous commit.
|
|
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
|
|
The method change is forbidden by the obsolete RFC2616, but libcurl did
it anyway for compatibility reasons. The new RFC7231 allows this
behaviour so there's no need for the scary "Violate RFC 2616/10.3.x"
notice. Also update the comments accordingly.
|
|
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
|
|
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
|
|
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
|
|
|
|
|
|
For HTTP/2, we may read up everything including responde body with
header fields in Curl_http_readwrite_headers. If no content-length is
provided, curl waits for the connection close, which we emulate it
using conn->proto.httpc.closed = TRUE. The thing is if we read
everything, then http2_recv won't be called and we cannot signal the
HTTP/2 stream has closed. As a workaround, we return nonzero from
data_pending to call http2_recv.
|
|
Replaced the #define CURL_TIMEOUT_EXPECT_100 in transfer.c with the
CURLOPT_EXPECT_100_TIMEOUT_MS option to make the timeout configurable.
|
|
When using the multi socket interface, libcurl calls the
curl_multi_timer_callback asking to be woken up after
CURL_TIMEOUT_EXPECT_100 milliseconds.
After the timeout has expired, calling curl_multi_socket_action with
CURL_SOCKET_TIMEOUT as sockfd leads libcurl to check expired
timeouts. When handling the 100-continue one, the following check in
Curl_readwrite() fails if exactly CURL_TIMEOUT_EXPECT_100 milliseconds
passed since the timeout has been set!
It seems logical to consider that having waited for exactly
CURL_TIMEOUT_EXPECT_100 ms is enough.
Bug: http://curl.haxx.se/bug/view.cgi?id=1334
|
|
With the recently added timeout "reminder" functionality, there's no
reason left for us to execute timeout code before the time is
ripe. Simplifies the handling too.
This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate
again, which probably is most important when the *_MS versions are used.
In multi_socket, make sure to update 'now' after having handled activity
on a socket.
|
|
Following commit 0aafd77fa4c6f2, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
|
|
Make sure that we detect such attempts and return a proper error code
instead of silently handling this in problematic ways.
Updated the documentation to mention this limitation.
Bug: http://curl.haxx.se/bug/view.cgi?id=1286
|
|
|
|
|
|
Since all systems have inaccuracy in the timeout handling it is
imperative that we add an inaccuracy margin to the general timeout and
connecttimeout handling with the multi interface. This way, when the
timeout fires we should be fairly sure that it has passed the timeout
value and will be suitably detected.
For cases where the timeout fire before the actual timeout, we would
otherwise consume the timeout action and still not run the timeout code
since the condition wasn't met.
Reported-by: He Qin
Bug: http://curl.haxx.se/bug/view.cgi?id=1298
|
|
When using the -w '%{http_code}' flag and simulating a Not Modified then
304 should be output.
|
|
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
|
|
|
|
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
|
|
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
|
|
Curl_perfom is no longer used anywhere since the always-multi commit
c43127414d89ccb9, and some related functions were used only from within
Curl_perfom.
|
|
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
93 lib/*.c source files renamed to use our standard naming scheme.
This commit only does the file renaming.
----------------------------------------
renamed: lib/amigaos.c -> lib/curl_amigaos.c
renamed: lib/asyn-ares.c -> lib/curl_asyn_ares.c
renamed: lib/asyn-thread.c -> lib/curl_asyn_thread.c
renamed: lib/axtls.c -> lib/curl_axtls.c
renamed: lib/base64.c -> lib/curl_base64.c
renamed: lib/bundles.c -> lib/curl_bundles.c
renamed: lib/conncache.c -> lib/curl_conncache.c
renamed: lib/connect.c -> lib/curl_connect.c
renamed: lib/content_encoding.c -> lib/curl_content_encoding.c
renamed: lib/cookie.c -> lib/curl_cookie.c
renamed: lib/cyassl.c -> lib/curl_cyassl.c
renamed: lib/dict.c -> lib/curl_dict.c
renamed: lib/easy.c -> lib/curl_easy.c
renamed: lib/escape.c -> lib/curl_escape.c
renamed: lib/file.c -> lib/curl_file.c
renamed: lib/fileinfo.c -> lib/curl_fileinfo.c
renamed: lib/formdata.c -> lib/curl_formdata.c
renamed: lib/ftp.c -> lib/curl_ftp.c
renamed: lib/ftplistparser.c -> lib/curl_ftplistparser.c
renamed: lib/getenv.c -> lib/curl_getenv.c
renamed: lib/getinfo.c -> lib/curl_getinfo.c
renamed: lib/gopher.c -> lib/curl_gopher.c
renamed: lib/gtls.c -> lib/curl_gtls.c
renamed: lib/hash.c -> lib/curl_hash.c
renamed: lib/hmac.c -> lib/curl_hmac.c
renamed: lib/hostasyn.c -> lib/curl_hostasyn.c
renamed: lib/hostcheck.c -> lib/curl_hostcheck.c
renamed: lib/hostip.c -> lib/curl_hostip.c
renamed: lib/hostip4.c -> lib/curl_hostip4.c
renamed: lib/hostip6.c -> lib/curl_hostip6.c
renamed: lib/hostsyn.c -> lib/curl_hostsyn.c
renamed: lib/http.c -> lib/curl_http.c
renamed: lib/http_chunks.c -> lib/curl_http_chunks.c
renamed: lib/http_digest.c -> lib/curl_http_digest.c
renamed: lib/http_negotiate.c -> lib/curl_http_negotiate.c
renamed: lib/http_negotiate_sspi.c -> lib/curl_http_negotiate_sspi.c
renamed: lib/http_proxy.c -> lib/curl_http_proxy.c
renamed: lib/idn_win32.c -> lib/curl_idn_win32.c
renamed: lib/if2ip.c -> lib/curl_if2ip.c
renamed: lib/imap.c -> lib/curl_imap.c
renamed: lib/inet_ntop.c -> lib/curl_inet_ntop.c
renamed: lib/inet_pton.c -> lib/curl_inet_pton.c
renamed: lib/krb4.c -> lib/curl_krb4.c
renamed: lib/krb5.c -> lib/curl_krb5.c
renamed: lib/ldap.c -> lib/curl_ldap.c
renamed: lib/llist.c -> lib/curl_llist.c
renamed: lib/md4.c -> lib/curl_md4.c
renamed: lib/md5.c -> lib/curl_md5.c
renamed: lib/memdebug.c -> lib/curl_memdebug.c
renamed: lib/mprintf.c -> lib/curl_mprintf.c
renamed: lib/multi.c -> lib/curl_multi.c
renamed: lib/netrc.c -> lib/curl_netrc.c
renamed: lib/non-ascii.c -> lib/curl_non_ascii.c
renamed: lib/curl_non-ascii.h -> lib/curl_non_ascii.h
renamed: lib/nonblock.c -> lib/curl_nonblock.c
renamed: lib/nss.c -> lib/curl_nss.c
renamed: lib/nwlib.c -> lib/curl_nwlib.c
renamed: lib/nwos.c -> lib/curl_nwos.c
renamed: lib/openldap.c -> lib/curl_openldap.c
renamed: lib/parsedate.c -> lib/curl_parsedate.c
renamed: lib/pingpong.c -> lib/curl_pingpong.c
renamed: lib/polarssl.c -> lib/curl_polarssl.c
renamed: lib/pop3.c -> lib/curl_pop3.c
renamed: lib/progress.c -> lib/curl_progress.c
renamed: lib/qssl.c -> lib/curl_qssl.c
renamed: lib/rawstr.c -> lib/curl_rawstr.c
renamed: lib/rtsp.c -> lib/curl_rtsp.c
renamed: lib/security.c -> lib/curl_security.c
renamed: lib/select.c -> lib/curl_select.c
renamed: lib/sendf.c -> lib/curl_sendf.c
renamed: lib/share.c -> lib/curl_share.c
renamed: lib/slist.c -> lib/curl_slist.c
renamed: lib/smtp.c -> lib/curl_smtp.c
renamed: lib/socks.c -> lib/curl_socks.c
renamed: lib/socks_gssapi.c -> lib/curl_socks_gssapi.c
renamed: lib/socks_sspi.c -> lib/curl_socks_sspi.c
renamed: lib/speedcheck.c -> lib/curl_speedcheck.c
renamed: lib/splay.c -> lib/curl_splay.c
renamed: lib/ssh.c -> lib/curl_ssh.c
renamed: lib/sslgen.c -> lib/curl_sslgen.c
renamed: lib/ssluse.c -> lib/curl_ssluse.c
renamed: lib/strdup.c -> lib/curl_strdup.c
renamed: lib/strequal.c -> lib/curl_strequal.c
renamed: lib/strerror.c -> lib/curl_strerror.c
renamed: lib/strtok.c -> lib/curl_strtok.c
renamed: lib/strtoofft.c -> lib/curl_strtoofft.c
renamed: lib/telnet.c -> lib/curl_telnet.c
renamed: lib/tftp.c -> lib/curl_tftp.c
renamed: lib/timeval.c -> lib/curl_timeval.c
renamed: lib/transfer.c -> lib/curl_transfer.c
renamed: lib/url.c -> lib/curl_url.c
renamed: lib/version.c -> lib/curl_version.c
renamed: lib/warnless.c -> lib/curl_warnless.c
renamed: lib/wildcard.c -> lib/curl_wildcard.c
----------------------------------------
|
|
93 *.c source files renamed to use our standard naming scheme.
This change affects 77 files in libcurl's source tree.
|
|
76 private header files renamed to use our standard naming scheme.
This change affects 322 files in libcurl's source tree.
|
|
Inclusion of top two most included header files now done in setup_once.h
|
|
The text "additional stuff not fine" text was added for debug purposes a
while ago, but it isn't really helping anyone and for some reason some
Linux distributions provide their libcurls built with debug info still
present and thus (far too many) users get to read this info.
|
|
As a handle can be re-used after having done HTTP auth in a previous
request, it must make sure to clear out the HTTP types that aren't
wanted in this new request.
|
|
This reverts commit ce8311c7e49eca93c136b58efa6763853541ec97.
The commit made test 2024 work but caused a regression with repeated
Digest authentication. We need to fix this differently.
|
|
The Curl_reconnect_request() function could end up returning a pointer
to a free()d struct when Curl_done() failed inside. Clearing the pointer
unconditionally after Curl_done() avoids this risk.
Reported by: Ho-chi Chen
Bug: http://curl.haxx.se/mail/lib-2012-09/0188.html
|
|
When figuring out if the data stream needs to be rewound when the
request is to be resent, we must not access the HTTP struct unless the
protocol used is indeed HTTP...
Bug: http://curl.haxx.se/bug/view.cgi?id=3544688
|
|
|
|
As it turns out, some people do want that after all.
|
|
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
|
