aboutsummaryrefslogtreecommitdiff
path: root/lib/url.c
AgeCommit message (Collapse)Author
2019-08-06http09: disable HTTP/0.9 by default in both tool and libraryDaniel Stenberg
As the plan has been laid out in DEPRECATED. Update docs accordingly and verify in test 1174. Now requires the option to be set to allow HTTP/0.9 responses. Closes #4191
2019-08-03url: make use of new HTTP version if alt-svc has oneDaniel Stenberg
2019-08-03url: set conn->transport to default TCP at init timeDaniel Stenberg
2019-08-01timediff: make it 64 bit (if possible) even with 32 bit time_tDaniel Stenberg
... to make it hold microseconds too. Fixes #4165 Closes #4168
2019-07-30cleanup: remove the 'numsocks' argument used in many placesDaniel Stenberg
It was used (intended) to pass in the size of the 'socks' array that is also passed to these functions, but was rarely actually checked/used and the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries that should be used instead. Closes #4169
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-17libcurl: Restrict redirect schemes (follow-up)Jay Satiro
- Allow FTPS on redirect. - Update default allowed redirect protocols in documentation. Follow-up to 6080ea0. Ref: https://github.com/curl/curl/pull/4094 Closes https://github.com/curl/curl/pull/4115
2019-07-14libcurl: Restrict redirect schemesLinos Giannopoulos
All protocols except for CURLPROTO_FILE/CURLPROTO_SMB and their TLS counterpart were allowed for redirect. This vastly broadens the exploitation surface in case of a vulnerability such as SSRF [1], where libcurl-based clients are forced to make requests to arbitrary hosts. For instance, CURLPROTO_GOPHER can be used to smuggle any TCP-based protocol by URL-encoding a payload in the URI. Gopher will open a TCP connection and send the payload. Only HTTP/HTTPS and FTP are allowed. All other protocols have to be explicitly enabled for redirects through CURLOPT_REDIR_PROTOCOLS. [1]: https://www.acunetix.com/blog/articles/server-side-request-forgery-vulnerability/ Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr> Closes #4094
2019-06-17conn_maxage: move the check to prune_dead_connections()Daniel Stenberg
... and avoid the locking issue. Reported-by: Kunal Ekawde Fixes #4029 Closes #4032
2019-06-12url: Fix CURLOPT_MAXAGE_CONN time comparisonCliff Crosland
Old connections are meant to expire from the connection cache after CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x that value. This occurs because a time value measured in milliseconds is accidentally divided by 1M instead of by 1,000. Closes https://github.com/curl/curl/pull/4013
2019-06-10multi: make sure 'data' can present in several sockhash entriesDaniel Stenberg
Since more than one socket can be used by each transfer at a given time, each sockhash entry how has its own hash table with transfers using that socket. In addition, the sockhash entry can now be marked 'blocked = TRUE'" which then makes the delete function just set 'removed = TRUE' instead of removing it "for real", as a way to not rip out the carpet under the feet of a parent function that iterates over the transfers of that same sockhash entry. Reported-by: Tom van der Woerdt Fixes #3961 Fixes #3986 Fixes #3995 Fixes #4004 Closes #3997
2019-05-29url: Load if_nametoindex() dynamically from iphlpapi.dll on WindowsSteve Holme
This fixes the static dependency on iphlpapi.lib and allows curl to build for targets prior to Windows Vista. This partially reverts 170bd047. Fixes #3960 Closes #3958
2019-05-28parse_proxy: make sure portptr is initializedDaniel Stenberg
Reported-by: Benbuck Nason fixes #3959
2019-05-28url: default conn->port to the same as conn->remote_portDaniel Stenberg
... so that it has a sensible value when ConnectionExists() is called which needs it set to differentiate host "bundles" correctly on port number! Also, make conncache:hashkey() use correct port for bundles that are proxy vs host connections. Probably a regression from 7.62.0 Reported-by: Tom van der Woerdt Fixes #3956 Closes #3957
2019-05-28conncache: make "bundles" per host name when doing proxy tunnelsDaniel Stenberg
Only HTTP proxy use where multiple host names can be used over the same connection should use the proxy host name for bundles. Reported-by: Tom van der Woerdt Fixes #3951 Closes #3955
2019-05-25Revert all SASL authzid (new feature) commitsJay Satiro
- Revert all commits related to the SASL authzid feature since the next release will be a patch release, 7.65.1. Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined for the next release, assuming it would be a feature release 7.66.0. However instead the next release will be a patch release, 7.65.1 and will not contain any new features. After the patch release after the reverted commits can be restored by using cherry-pick: git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690 Details for all reverted commits: Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()." This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a. Revert "tests: Fix the line endings for the SASL alt-auth tests" This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221. Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples" This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75. Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool" This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817. Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID" This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
2019-05-24Fix typo.Gisle Vanem
2019-05-23config-win32: add support for if_nametoindex and getsocknameZenju
Closes https://github.com/curl/curl/pull/3923
2019-05-23url: fix bad #ifdefDaniel Stenberg
Regression since e91e48161235272ff485. Reported-by: Tom Greenslade Fixes #3924 Closes #3925
2019-05-22sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZIDSteve Holme
Added the ability for the calling program to specify the authorisation identity (authzid), the identity to act as, in addition to the authentication identity (authcid) and password when using SASL PLAIN authentication. Fixed #3653 Closes #3790
2019-05-22parse_proxy: use the IPv6 zone id if givenDaniel Stenberg
If the proxy string is given as an IPv6 numerical address with a zone id, make sure to use that for the connect to the proxy. Reported-by: Edmond Yu Fixes #3482 Closes #3918
2019-05-21url: convert the zone id from a IPv6 URL to correct scope idDaniel Stenberg
Reported-by: GitYuanQu on github Fixes #3902 Closes #3914
2019-05-17libcurl: #ifdef away more code for disabled features/protocolsDaniel Stenberg
2019-05-15parse_proxy: use the URL parser APIDaniel Stenberg
As we treat a given proxy as a URL we should use the unified URL parser to extract the parts out of it. Closes #3878
2019-05-15http_ntlm: Move the NTLM state out of the ntlmdata structureSteve Holme
Given that this member variable is not used by the SASL based protocols there is no need to have it here.
2019-05-14url: Remove duplicate clean up of the winbind variables in conn_shutdown()Steve Holme
Given that Curl_disconnect() calls Curl_http_auth_cleanup_ntlm() prior to calling conn_shutdown() and it in turn performs this, there is no need to perform the same action in conn_shutdown(). Closes #3881
2019-05-14url: Remove unnecessary initialisation from allocate_conn()Steve Holme
No need to set variables to zero as calloc() does this for us. Closes #3879
2019-05-13proxy: acknowledge DISABLE_PROXY moreDaniel Stenberg
2019-05-12auth: Rename the various authentication clean up functionsSteve Holme
For consistency and to a avoid confusion. Closes #3869
2019-05-11http_digest: Don't expose functions when HTTP and Crypto Auth are disabledSteve Holme
Closes #3861
2019-05-06ssh: define USE_SSH if SSH is enabled (any backend)Daniel Stenberg
Closes #3846
2019-05-01ConnectionExists: improve non-multiplexing use caseDaniel Stenberg
- better log output - make sure multiplex is enabled for it to be used
2019-04-21CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuseDaniel Stenberg
... and disconnect too old ones instead of trying to reuse. Default max age is set to 118 seconds. Ref: #3722 Closes #3782
2019-04-20Curl_disconnect: treat all CONNECT_ONLY connections as "dead"Daniel Stenberg
Since the connection has been used by the "outside" we don't know the state of it anymore and curl should not use it anymore. Bug: https://curl.haxx.se/mail/lib-2019-04/0052.html Closes #3795
2019-04-11url: always clone the CUROPT_CURLU handleDaniel Stenberg
Since a few code paths actually update that data. Fixes #3753 Closes #3761 Reported-by: Poul T Lomholt
2019-04-06pipelining: removedDaniel Stenberg
As previously planned and documented in DEPRECATE.md, all pipelining code is removed. Closes #3651
2019-03-17conncache: use conn->data to know if a transfer owns itDaniel Stenberg
- make sure an already "owned" connection isn't returned unless multiplexed. - clear ->data when returning the connection to the cache again Regression since 7.62.0 (probably in commit 1b76c38904f0) Bug: https://curl.haxx.se/mail/lib-2019-03/0064.html Closes #3686
2019-03-14Negotiate: fix for HTTP POST with NegotiateDominik Hölzl
* Adjusted unit tests 2056, 2057 * do not generally close connections with CURLAUTH_NEGOTIATE after every request * moved negotiatedata from UrlState to connectdata * Added stream rewind logic for CURLAUTH_NEGOTIATE * introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC * Consider authproblem state for CURLAUTH_NEGOTIATE * Consider reuse_forbid for CURLAUTH_NEGOTIATE * moved and adjusted negotiate authentication state handling from output_auth_headers into Curl_output_negotiate * Curl_output_negotiate: ensure auth done is always set * Curl_output_negotiate: Set auth done also if result code is GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may also indicate the last challenge request (only works with disabled Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1) * Consider "Persistent-Auth" header, detect if not present; Reset/Cleanup negotiate after authentication if no persistent authentication * apply changes introduced with #2546 for negotiate rewind logic Fixes #1261 Closes #1975
2019-03-04CURLU: fix NULL dereference when used over proxyDaniel Stenberg
Test 659 verifies Also fixed the test 658 name Closes #3641
2019-03-03alt-svc: the libcurl bitsDaniel Stenberg
2019-03-01urldata: simplify bytecountersDaniel Stenberg
- no need to have them protocol specific - no need to set pointers to them with the Curl_setup_transfer() call - make Curl_setup_transfer() operate on a transfer pointer, not connection - switch some counters from long to the more proper curl_off_t type Closes #3627
2019-02-22url: change conn shutdown order to unlink data as last stepJay Satiro
- Split off connection shutdown procedure from Curl_disconnect into new function conn_shutdown. - Change the shutdown procedure to close the sockets before disassociating the transfer. Prior to this change the sockets were closed after disassociating the transfer so SOCKETFUNCTION wasn't called since the transfer was already disassociated. That likely came about from recent work started in Jan 2019 (#3442) to separate transfers from connections. Bug: https://curl.haxx.se/mail/lib-2019-02/0101.html Reported-by: Pavel Löbl Closes https://github.com/curl/curl/issues/3597 Closes https://github.com/curl/curl/pull/3598
2019-02-19connection: never reuse CONNECT_ONLY conectionsDaniel Stenberg
and make CONNECT_ONLY conections never reuse any existing ones either. Reported-by: Pavel Löbl Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html Closes #3586
2019-02-14strip_trailing_dot: make sure NULL is never used for strlenDaniel Stenberg
scan-build warning: Null pointer passed as an argument to a 'nonnull' parameter
2019-02-14connection_check: restore original conn->data after the checkJay Satiro
- Save the original conn->data before it's changed to the specified data transfer for the connection check and then restore it afterwards. This is a follow-up to 38d8e1b 2019-02-11. History: It was discovered a month ago that before checking whether to extract a dead connection that that connection should be associated with a "live" transfer for the check (ie original conn->data ignored and set to the passed in data). A fix was landed in 54b201b which did that and also cleared conn->data after the check. The original conn->data was not restored, so presumably it was thought that a valid conn->data was no longer needed. Several days later it was discovered that a valid conn->data was needed after the check and follow-up fix was landed in bbae24c which partially reverted the original fix and attempted to limit the scope of when conn->data was changed to only when pruning dead connections. In that case conn->data was not cleared and the original conn->data not restored. A month later it was discovered that the original fix was somewhat correct; a "live" transfer is needed for the check in all cases because original conn->data could be null which could cause a bad deref at arbitrary points in the check. A fix was landed in 38d8e1b which expanded the scope to all cases. conn->data was not cleared and the original conn->data not restored. A day later it was discovered that not restoring the original conn->data may lead to busy loops in applications that use the event interface, and given this observation it's a pretty safe assumption that there is some code path that still needs the original conn->data. This commit is the follow-up fix for that, it restores the original conn->data after the connection check. Assisted-by: tholin@users.noreply.github.com Reported-by: tholin@users.noreply.github.com Fixes https://github.com/curl/curl/issues/3542 Closes #3559
2019-02-11connection_check: set ->data to the transfer doing the checkDaniel Stenberg
The http2 code for connection checking needs a transfer to use. Make sure a working one is set before handler->connection_check() is called. Reported-by: jnbr on github Fixes #3541 Closes #3547
2019-02-10cleanup: make local functions staticDaniel Stenberg
urlapi: turn three local-only functions into statics conncache: make conncache_find_first_connection static multi: make detach_connnection static connect: make getaddressinfo static curl_ntlm_core: make hmac_md5 static http2: make two functions static http: make http_setup_conn static connect: make tcpnodelay static tests: make UNITTEST a thing to mark functions with, so they can be static for normal builds and non-static for unit test builds ... and mark Curl_shuffle_addr accordingly. url: make up_free static setopt: make vsetopt static curl_endian: make write32_le static rtsp: make rtsp_connisdead static warnless: remove unused functions memdebug: remove one unused function, made another static
2019-02-09url/idnconvert: remove scan for <= 32 ascii valuesDaniel Stenberg
The check was added back in fa939220df before the URL parser would catch these problems and therefore these will never trigger now. Closes #3539
2019-02-06url: close TLS before removing conn from cacheChris Araman
- Fix potential crashes in schannel shutdown. Ensure any TLS shutdown messages are sent before removing the association between the connection and the easy handle. Reverts @bagder's previous partial fix for #3412. Fixes https://github.com/curl/curl/issues/3412 Fixes https://github.com/curl/curl/issues/3505 Closes https://github.com/curl/curl/pull/3531
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:53:06 +0000