| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2005-03-09 | As reported by 'nodak sodak' we should check for a NULL pointer before | Daniel Stenberg | |
| referencing the proxy name pointer. | |||
| 2005-02-09 | prevent a compiler warning | Daniel Stenberg | |
| 2005-02-09 | FTP code turned into state machine. Not completely yet, but a good start. | Daniel Stenberg | |
| The tag 'before_ftp_statemachine' was set just before this commit in case of future need. | |||
| 2005-01-30 | Use calloc() to save us the memset() call and terminate conn->host.name | Daniel Stenberg | |
| properly, to avoid reading uninited variables when using file:// (valgrind) | |||
| 2005-01-29 | conn->ip_addr MUST NOT be used on re-used connections | Daniel Stenberg | |
| 2005-01-28 | KNOWN_BUGS #17 fixed. A DNS cache entry may not remain locked between two | Daniel Stenberg | |
| curl_easy_perform() invokes. It was previously unlocked at disconnect, which could mean that it remained locked between multiple transfers. The DNS cache may not live as long as the connection cache does, as they are separate. To deal with the lack of DNS (host address) data availability in re-used connections, libcurl now keeps a copy of the IP adress as a string, to be able to show it even on subsequent requests on the same connection. | |||
| 2005-01-25 | Ian Ford asked about support for the FTP command ACCT, and I discovered it is | Daniel Stenberg | |
| present in RFC959... so now (lib)curl supports it as well. --ftp-account and CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an account string after PASS have been sent away. The client responds with "ACCT [account string]".) Added test case 228 and 229 to verify the functionality. Updated the test FTP server to support ACCT somewhat. | |||
| 2005-01-21 | FTP third transfer support overhaul. See CHANGES for details. | Daniel Stenberg | |
| 2005-01-19 | Stephan Bergmann pointed out two flaws in libcurl built with HTTP disabled: | Daniel Stenberg | |
| 1) the proxy environment variables are still read and used to set HTTP proxy 2) you couldn't disable http proxy with CURLOPT_PROXY (since the option was disabled) | |||
| 2005-01-16 | Alex aka WindEagle pointed out that when doing "curl -v dictionary.com", curl | Daniel Stenberg | |
| assumed this used the DICT protocol. While guessing protocols will remain fuzzy, I've now made sure that the host names must start with "[protocol]." for them to be a valid guessable name. I also removed "https" as a prefix that indicates HTTPS, since we hardly ever see any host names using that. | |||
| 2005-01-11 | Renamed easy.h and multi.h to easyif.h and multiif.h to make sure they don't | Daniel Stenberg | |
| shadow our public headers with the former names. | |||
| 2005-01-10 | Bruce Mitchener identified (bug report #1099640) the never-ending SOCKS5 | Daniel Stenberg | |
| problem with the version byte and the check for bad versions. Bruce has lots of clues on this, and based on his suggestion I've now removed the check of that byte since it seems to be able to contain 1 or 5. | |||
| 2005-01-10 | Pavel Orehov reported memory problems with the multi interface in bug report | Daniel Stenberg | |
| #1098843. In short, a shared DNS cache was setup for a multi handle and when the shared cache was deleted before the individual easy handles, the latter cleanups caused read/writes to already freed memory. | |||
| 2004-12-17 | Print true netrc name (.netrc/_netrc). | Gisle Vanem | |
| 2004-12-16 | Renamed a struct member to avoid conflict with a C++ reserved word. | Dan Fandrich | |
| 2004-12-14 | Harshal Pradhan fixed changing username/password on a persitent HTTP | Daniel Stenberg | |
| connection. | |||
| 2004-12-13 | Added handling of CURLINFO_SSL_ENGINES; | Gisle Vanem | |
| Added Curl_SSL_engines_list(), cleanup SSL in url.c (no HAVE_OPENSSL_x etc.). | |||
| 2004-12-10 | move the port number extraction to after the extraction of user name/password, | Daniel Stenberg | |
| as suggested by Kai Sommerfeld | |||
| 2004-12-05 | Dan Fandrich added the --disable-cookies option to configure to build | Daniel Stenberg | |
| libcurl without cookie support. This is mainly useful if you want to build a minimalistic libcurl with no cookies support at all. Like for embedded systems or similar. | |||
| 2004-11-26 | I changed my mind. Remove ioctl() macro in setup.h instead. | Gisle Vanem | |
| 2004-11-26 | Renamed urldata.h members 'ioctl*' to 'ioctrl*' due to | Gisle Vanem | |
| clash with djgpp ioctl() macro in setup.h. | |||
| 2004-11-25 | FTP improvements: | Daniel Stenberg | |
| If EPSV, EPRT or LPRT is tried and doesn't work, it will not be retried on the same server again even if a following request is made using a persistent connection. If a second request is made to a server, requesting a file from the same directory as the previous request operated on, libcurl will no longer make that long series of CWD commands just to end up on the same spot. Note that this is only for *exactly* the same dir. There is still room for improvements to optimize the CWD-sending when the dirs are only slightly different. Added test 210, 211 and 212 to verify these changes. Had to improve the test script too and added a new primitive to the test file format. | |||
| 2004-11-24 | HTTP "auth done right". See lib/README.httpauth | Daniel Stenberg | |
| 2004-11-19 | David Phillips' FD_SETSIZE fix | Daniel Stenberg | |
| 2004-11-18 | Dan Fandrich fix: eliminates some pedantic CodeWarrior compiler warnings and | Daniel Stenberg | |
| errors. | |||
| 2004-11-15 | clean up start time and t_startsingle use so that redirect_time works properly | Daniel Stenberg | |
| 2004-11-12 | Dan Fandrich added the --disable-crypto-auth option to configure to allow | Daniel Stenberg | |
| libcurl to build without Digest support. (I figure it should also explicitly disable Negotiate and NTLM.) | |||
| 2004-11-11 | Fix behaviour when passing NULL to CURLOPT_POSTFIELDS and CURLOPT_HTTPPOST. | Daniel Stenberg | |
| 2004-11-02 | Paul Nolan fix to make libcurl build nicely on Windows CE | Daniel Stenberg | |
| 2004-10-14 | Eric Vergnaud pointed out that libcurl didn't treat ?-letters in the user name | Daniel Stenberg | |
| and password fields properly in URLs, like ftp://us?er:pass?word@site.com/. Added test 191 to verify the fix. | |||
| 2004-10-10 | another lame attempt to avoid the "warning: will never be executed" warning | Daniel Stenberg | |
| by gcc 3.4 | |||
| 2004-10-07 | use tld_strerror() only if previously detected, since otherwise we can't | Daniel Stenberg | |
| work with libidn < 0.5.6 | |||
| 2004-10-06 | Fixed tld_check_name(). idna_to_unicode_lzlz() should never fail, | Gisle Vanem | |
| but return FALSE if 'uc_name == NULL' just in case. | |||
| 2004-10-06 | USE_LIBIDN: Added Top-level-domain (TLD) check for host->name. | Gisle Vanem | |
| Only print a warning if check fails. | |||
| 2004-10-06 | removed tabs and trailing whitespace from source | Daniel Stenberg | |
| 2004-10-05 | minor edit to re-use a variable and to hopefully avoid a (moot) warning | Daniel Stenberg | |
| about code that won't be reached | |||
| 2004-10-04 | Made the dns entry remain locked while a connection to the host remains to | Daniel Stenberg | |
| allow verbose output during this period. Bertrand Demiddelaer reported and helped fixing. | |||
| 2004-10-02 | Gisle Vanem provided code that displays an error message when the (libidn | Daniel Stenberg | |
| based) IDN conversion fails. This is really due to a missing suitable function in the libidn API that I hope we can remove once libidn gets a function like this. | |||
| 2004-09-28 | Only active the engine code if ssl is enabled. This is how the actual engine | Daniel Stenberg | |
| member in the struct is used. | |||
| 2004-09-25 | allow setting CURLOPT_SSLENGINE to NULL even if no SSL engine is supported | Daniel Stenberg | |
| 2004-09-16 | Added CURLOPT_FTPSSLAUTH | Daniel Stenberg | |
| 2004-09-10 | - Bug report #1025986. When following a Location: with a custom Host: header | Daniel Stenberg | |
| replacement, curl only replaced the Host: header on the initial request and didn't replace it on the following ones. This resulted in requests with two Host: headers. Now, curl checks if the location is on the same host as the initial request and then continues to replace the Host: header. And when it moves to another host, it doesn't replace the Host: header but it also doesn't make the second Host: header get used in the request. This change is verified by the two new test cases 184 and 185. | |||
| 2004-08-16 | allow a custom "Accept-Encoding:" header override the internally set one | Daniel Stenberg | |
| that gets set with CURLOPT_ENCODING | |||
| 2004-08-10 | Ok, setting CURLOPT_POST to 0 will now convert the request to a GET (this | Daniel Stenberg | |
| remains undocumented as this is not the way we recommend) | |||
| 2004-07-29 | prevent all the sig and alarm stuff when using ares | Daniel Stenberg | |
| 2004-07-28 | Bertrand Demiddelaer fixed the host name to get setup properly even when | Daniel Stenberg | |
| a connection is re-used, when a proxy is in use. | |||
| 2004-07-10 | ifdef keep_sigact since its only used when SIGALRM is defined. | Gunter Knauf | |
| 2004-07-04 | explicit typecasts when converting from long to int to avoid warnings | Daniel Stenberg | |
| 2004-07-04 | made 'connectindex' a long variable to prevent compiler warnings when | Daniel Stenberg | |
| implicitly converting it to int | |||
| 2004-07-01 | variable type cleanup to fix picky compiler warnings | Daniel Stenberg | |
 |
index : curl | |
| cURL mirror with patches applied | Ben |
| aboutsummaryrefslogtreecommitdiff |