aboutsummaryrefslogtreecommitdiff
path: root/lib/url.c
AgeCommit message (Collapse)Author
2015-11-09oauth2: Don't use XOAUTH2 in OAuth 2.0 variablesSteve Holme
2015-11-09oauth2: Use OAuth 2.0 rather than XOAUTH2 in commentsSteve Holme
When referring to OAuth 2.0 we should use the official name rather the SASL mechanism name.
2015-10-23http2: s/priority/weightDaniel Stenberg
2015-10-23http2: added three stream prio/deps optionsDaniel Stenberg
CURLOPT_STREAM_DEPENDS CURLOPT_STREAM_DEPENDS_E CURLOPT_STREAM_PRIORITY
2015-10-15fread_func: move callback pointer from set to state structDaniel Stenberg
... and assign it from the set.fread_func_set pointer in the Curl_init_CONNECT function. This A) avoids that we have code that assigns fields in the 'set' struct (which we always knew was bad) and more importantly B) it makes it impossibly to accidentally leave the wrong value for when the handle is re-used etc. Introducing a state-init functionality in multi.c, so that we can set a specific function to get called when we enter a state. The Curl_init_CONNECT is thus called when switching to the CONNECT state. Bug: https://github.com/bagder/curl/issues/346 Closes #346
2015-09-19NTLM: Reset auth-done when using a fresh connectionIsaac Boukris
With NTLM a new connection will always require authentication. Fixes #435
2015-09-08parse_proxy: reject illegal port numbersDaniel Stenberg
If the port number in the proxy string ended weirdly or the number is too large, skip it. Mostly as a means to bail out early if a "bare" IPv6 numerical address is used without enclosing brackets. Also mention the bracket requirement for IPv6 numerical addresses to the man page for CURLOPT_PROXY. Closes #415 Reported-by: Marcel Raad
2015-08-22CURLOPT_DEFAULT_PROTOCOL: addedNathaniel Waisbrot
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default protocol for schemeless URLs. - Add new tool option --proto-default to expose CURLOPT_DEFAULT_PROTOCOL. In the case of schemeless URLs libcurl will behave in this way: When the option is used libcurl will use the supplied default. When the option is not used, libcurl will follow its usual plan of guessing from the hostname and falling back to 'http'.
2015-07-17SSL: Add an option to disable certificate revocation checksJay Satiro
New tool option --ssl-no-revoke. New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS. Currently this option applies only to WinSSL where we have automatic certificate revocation checking by default. According to the ssl-compared chart there are other backends that have automatic checking (NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at some later point. Bug: https://github.com/bagder/curl/issues/264 Reported-by: zenden2k <zenden2k@gmail.com>
2015-06-24http2: init the pushed transfer properlyDaniel Stenberg
2015-05-22parse_proxy: switch off tunneling if non-HTTP proxyDaniel Stenberg
non-HTTP proxy implies not using CURLOPT_HTTPPROXYTUNNEL Bug: http://curl.haxx.se/mail/lib-2015-05/0056.html Reported-by: Sean Boudreau
2015-05-20read_callback: move to SessionHandle from connectdataDaniel Stenberg
With many easy handles using the same connection for multiplexing, it is important we store and keep the transfer-oriented stuff in the SessionHandle so that callbacks and callback data work fine even when many easy handles share the same physical connection.
2015-05-18http2: fix build when NOT h2-enabledDaniel Stenberg
2015-05-18pipeline: switch some code over to functionsDaniel Stenberg
... to "compartmentalize" a bit and make it easier to change behavior when multiplexing is used instead of good old pipelining.
2015-05-18CURLOPT_PIPEWAIT: addedDaniel Stenberg
By setting this option to 1 libcurl will wait for a connection to reveal if it is possible to pipeline/multiplex on before it continues.
2015-05-18IsPipeliningPossible: fixed for http2Daniel Stenberg
2015-05-18http2: remove the stream from the hash in stream_close callbackDaniel Stenberg
... and suddenly things work much better!
2015-05-18http2: set default concurrency, fix ConnectionExists for multiplexDaniel Stenberg
2015-05-18bundles: store no/default/pipeline/multiplexDaniel Stenberg
to allow code to act differently on the situation. Also added some more info message for the connection re-use function to make it clearer when connections are not re-used.
2015-05-18http2: separate multiplex/pipelining + cleanup memory leaksDaniel Stenberg
2015-05-18CURLMOPT_PIPELINE: bit 1 is for multiplexingDaniel Stenberg
2015-05-18pipeline: move function to pipeline.c and make staticDaniel Stenberg
... as it was only used from there.
2015-05-18IsPipeliningPossible: http2 can always "pipeline" (multiplex)Daniel Stenberg
2015-05-18http2: force "drainage" of streamsDaniel Stenberg
... which is necessary since the socket won't be readable but there is data waiting in the buffer.
2015-05-18http2: move the mem+len pair to the stream structDaniel Stenberg
2015-05-12bundles: merged into conncache.cDaniel Stenberg
All the existing Curl_bundle* functions were only ever used from within the conncache.c file, so I moved them over and made them static (and removed the Curl_ prefix).
2015-05-12hostcache: made all host caches use structs, not pointersDaniel Stenberg
This avoids unnecessary dynamic allocs and as this also removed the last users of *hash_alloc() and *hash_destroy(), those two functions are now removed.
2015-05-12connection cache: avoid Curl_hash_alloc()Daniel Stenberg
... by using plain structs instead of pointers for the connection cache, we can avoid several dynamic allocations that weren't necessary.
2015-04-28CURLOPT_HEADEROPT: default to separateDaniel Stenberg
Make the HTTP headers separated by default for improved security and reduced risk for information leakage. Bug: http://curl.haxx.se/docs/adv_20150429.html Reported-by: Yehezkel Horowitz, Oren Souroujon
2015-04-28Negotiate: custom service names for SPNEGO.Linus Nielsen
* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME. * Add new curl options, --proxy-service-name and --service-name.
2015-04-27ConnectionExists: call it multi-use instead of pipeliningDaniel Stenberg
So that it fits HTTP/2 as well
2015-04-22connectionexists: follow-up to fd9d3a1ef1fDaniel Stenberg
PROTOPT_CREDSPERREQUEST still needs to be checked even when NTLM is not enabled. Mistake-caught-by: Kamil Dudka
2015-04-22connectionexists: fix build without NTLMDaniel Stenberg
Do not access NTLM-specific struct fields when built without NTLM enabled! bug: http://curl.haxx.se/?i=231 Reported-by: Patrick Rapin
2015-04-21fix_hostname: zero length host name caused -1 index offsetDaniel Stenberg
If a URL is given with a zero-length host name, like in "http://:80" or just ":80", `fix_hostname()` will index the host name pointer with a -1 offset (as it blindly assumes a non-zero length) and both read and assign that address. CVE-2015-3144 Bug: http://curl.haxx.se/docs/adv_20150422D.html Reported-by: Hanno Böck
2015-04-21ConnectionExists: for NTLM re-use, require credentials to matchDaniel Stenberg
CVE-2015-3143 Bug: http://curl.haxx.se/docs/adv_20150422A.html Reported-by: Paras Sethia
2015-03-27url: Don't accept CURLOPT_SSLVERSION unless USE_SSL is definedJay Satiro
2015-03-24CURLOPT_PATH_AS_IS: addedDaniel Stenberg
--path-as-is is the command line option Added docs in curl.1 and CURLOPT_PATH_AS_IS.3 Added test in test 1241
2015-03-20url: add CURLOPT_SSL_FALSESTART optionAlessandro Ghedini
This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart.
2015-03-17checksrc: use space after commaDaniel Stenberg
2015-03-16free: instead of Curl_safefree()Daniel Stenberg
Since we just started make use of free(NULL) in order to simplify code, this change takes it a step further and: - converts lots of Curl_safefree() calls to good old free() - makes Curl_safefree() not check the pointer before free() The (new) rule of thumb is: if you really want a function call that frees a pointer and then assigns it to NULL, then use Curl_safefree(). But we will prefer just using free() from now on.
2015-03-16Bug #149: Deletion of unnecessary checks before a few calls of cURL functionsMarkus Elfring
The following functions return immediately if a null pointer was passed. * Curl_cookie_cleanup * curl_formfree It is therefore not needed that a function caller repeats a corresponding check. This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-16Bug #149: Deletion of unnecessary checks before calls of the function "free"Markus Elfring
The function "free" is documented in the way that no action shall occur for a passed null pointer. It is therefore not needed that a function caller repeats a corresponding check. http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-11proxy: re-use proxy connections (regression)Daniel Stenberg
When checking for a connection to re-use, a proxy-using request must check for and use a proxy connection and not one based on the host name! Added test 1421 to verify Bug: http://curl.haxx.se/bug/view.cgi?id=1492
2015-03-03mprintf.h: remove #ifdef CURLDEBUGDaniel Stenberg
... and as a consequence, introduce curl_printf.h with that re-define magic instead and make all libcurl code use that instead.
2015-02-20configure: allow both --with-ca-bundle and --with-ca-pathJulian Ospald
SSL_CTX_load_verify_locations by default (and if given non-Null parameters) searches the CAfile first and falls back to CApath. This allows for CAfile to be a basis (e.g. installed by the package manager) and CApath to be a user configured directory. This wasn't reflected by the previous configure constraint which this patch fixes. Bug: https://github.com/bagder/curl/pull/139
2015-01-16url: add CURLOPT_SSL_VERIFYSTATUS optionAlessandro Ghedini
This option can be used to enable/disable certificate status verification using the "Certificate Status Request" TLS extension defined in RFC6066 section 8. This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the certificate status verification fails, and the Curl_ssl_cert_status_request() function, used to check whether the SSL backend supports the status_request extension.
2015-01-07url-parsing: reject CRLFs within URLsDaniel Stenberg
Bug: http://curl.haxx.se/docs/adv_20150108B.html Reported-by: Andrey Labunets
2014-12-26code/docs: Use Unix rather than UNIX to avoid use of the trademarkSteve Holme
Use Unix when generically writing about Unix based systems as UNIX is the trademark and should only be used in a particular product's name.
2014-12-17parseurlandfillconn(): fix improper non-numeric scope_id stripping.Kyle J. McKay
Fixes SF bug 1149: http://sourceforge.net/p/curl/bugs/1449/
2014-12-16IPV6: address scope != scope idPatrick Monnerat
There was a confusion between these: this commit tries to disambiguate them. - Scope can be computed from the address itself. - Scope id is scope dependent: it is currently defined as 1-based local interface index for link-local scoped addresses, and as a site index(?) for (obsolete) site-local addresses. Linux only supports it for link-local addresses. The URL parser properly parses a scope id as an interface index, but stores it in a field named "scope": confusion. The field has been renamed into "scope_id". Curl_if2ip() used the scope id as it was a scope. This caused failures to bind to an interface. Scope is now computed from the addresses and Curl_if2ip() matches them. If redundantly specified in the URL, scope id is check for mismatch with the interface index. This commit should fix SF bug #1451.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 11:12:27 +0000