| Age | Commit message (Collapse) | Author |
|---|
|
use of the "is_in_pipeline" struct field.
|
|
the SingleRequest one to make pipelining better. It is a bit tricky to keep
them in the right place, to keep things related to the actual request or to
the actual connection in the right place.
|
|
that it is bad anyway. Starting now, removing a handle that is in used in a
pipeline will break the pipeline - it'll be set back up again but still...
|
|
previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
|
|
The signalling of that a global DNS cache is wanted is done by setting the
option but the setting of the internal variable that it is in use must not be
done until it finally actually gets used!
NOTE and WARNING: I noticed that you can't actually switch off the global dns
cache with CURLOPT_DNS_USE_GLOBAL_CACHE but you couldn't do that previously
either and the option is very clearly and loudly documented as DO NOTE USE so
I won't bother to fix this bug now.
|
|
silly code left from when we switched to let the multi handle "hold" the dns
cache when using the multi interface... Of course this only triggered when a
certain function call returned error at the correct moment.
|
|
obvious ways. Give an explicit error.
|
|
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
|
|
and the write callbacks that now can make a connection's reading and/or
writing get paused.
|
|
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.
The default SOCKS5 proxy is again back to sending the IP address to the
proxy. The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
|
|
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
|
|
the appending of the "type=" thing on FTP URLs when they are passed to a
HTTP proxy. Some proxies just don't like that appending (which is done
unconditionally in 7.17.1), and some proxies treat binary/ascii transfers
better with the appending done!
|
|
is inited at the start of the DO action. I removed the Curl_transfer_keeper
struct completely, and I had to move out a few struct members (that had to
be set before DO or used after DONE) to the UrlState struct. The SingleRequest
struct is accessed with SessionHandle->req.
One of the biggest reasons for doing this was the bunch of duplicate struct
members in HandleData and Curl_transfer_keeper since it was really messy to
keep track of two variables with the same name and basically the same purpose!
|
|
the same state struct as the host auth, so both could never be used at the
same time! I fixed it (without being able to check) to use two separate
structs to allow authentication using Negotiate on host and proxy
simultanouesly.
|
|
|
|
do_init() and do_complete() which now are called first and last in the DO
function. It simplified the flow in multi.c and the functions got more
sensible names!
|
|
persistent connection. Mentioned by Immanuel Gregoire on the mailing list.
|
|
|
|
out that SFTP requests didn't use persistent connections. Neither did SCP
ones. I gave the SSH code a good beating and now both SCP and SFTP should
use persistent connections fine. I also did a bunch for indent changes as
well as a bug fix for the "keyboard interactive" auth.
|
|
connectdata struct. This will in theory enable us to do persistent connections
with SCP+SFTP, but currently the state machine always (and wrongly) cleanup
everything in the 'done' action instead of in 'disconnect'. Also did a bunch
of indent fixes, if () => if() and a few other source cleanups like added
comments etc.
|
|
|
|
https://bugzilla.novell.com/show_bug.cgi?id=332917 about a HTTP redirect to
FTP that caused memory havoc. His work together with my efforts created two
fixes:
#1 - FTP::file was moved to struct ftp_conn, because is has to be dealt with
at connection cleanup, at which time the struct HandleData could be
used by another connection.
Also, the unused char *urlpath member is removed from struct FTP.
#2 - provide a Curl_reset_reqproto() function that frees
data->reqdata.proto.* on connection setup if needed (that is if the
SessionHandle was used by a different connection).
|
|
CURLOPT_COPYPOSTFIELDS option added for dynamic.
Fix some OS400 features.
|
|
in the connectdata structure by a single handler table ptr.
|
|
This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
|
|
CURLOPT_OPENSOCKETDATA to set a callback that allows an application to replace
the socket() call used by libcurl. It basically allows the app to change
address, protocol or whatever of the socket. (I also did some whitespace
indent/cleanups in lib/url.c which kind of hides some of these changes, sorry
for mixing those in.)
|
|
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 and the curl tool --hostpubmd5. They both make
the SCP or SFTP connection verify the remote host's md5 checksum of the public
key before doing a connect, to reduce the risk of a man-in-the-middle attack.
|
|
Added test case 1008 to verify. Note that #47 is still there.
|
|
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
|
|
CURLOPT_NOBODY enabled but not CURLOPT_HEADER, libcurl wouldn't do TYPE
before it does SIZE which makes it less useful. I walked over the code and
made it do this properly, and added test case 542 to verify it.
|
|
o It looks for the NSS database first in the environment variable SSL_DIR,
then in /etc/pki/nssdb, then it initializes with no database if neither of
those exist.
o If the NSS PKCS#11 libnspsem.so driver is available then PEM files may be
loaded, including the ca-bundle. If it is not available then only
certificates already in the NSS database are used.
o Tries to detect whether a file or nickname is being passed in so the right
thing is done
o Added a bit of code to make the output more like the OpenSSL module,
including displaying the certificate information when connecting in
verbose mode
o Improved handling of certificate errors (expired, untrusted, etc)
The libnsspem.so PKCS#11 module is currently only available in Fedora
8/rawhide. Work will be done soon to upstream it. The NSS module will work
with or without it, all that changes is the source of the certificates and
keys.
|
|
Renamed the curl_ftpssl enum to curl_usessl and its enumerated constants,
creating macros for backward compatibility.
|
|
|
|
|
|
passed to it with curl_easy_setopt()! Previously it has always just refered
to the data, forcing the user to keep the data around until libcurl is done
with it. That is now history and libcurl will instead clone the given
strings and keep private copies.
|
|
of a socket after it has been closed, when the FTP-SSL data connection is taken
down.
|
|
|
|
some few internal identifiers to avoid conflicts, which could be useful on
other platforms.
|
|
* Move scp:// into a state machine so it won't block in multi mode
* When available use the full directory entry from the sftp:// server
|
|
libcurl. This also makes the options change name to --krb (from --krb4) and
CURLOPT_KRBLEVEL (from CURLOPT_KRB4LEVEL) but the old names are still
|
|
and CURLOPT_NEW_DIRECTORY_PERMS. These control the premissions for files
and directories created on the remote server. CURLOPT_NEW_FILE_PERMS
defaults to 0644 and CURLOPT_NEW_DIRECTORY_PERMS defaults to 0755
|
|
allocated when needed
|
|
libssh2_sftp_shutdown() and libssh2_session_free() can now return
LIBSSH2_ERROR_EAGAIN.
* Fix the _send() and _recv() return values so non-blocking works
|
|
LIBSSH2_APINO >= 200706012030. More to come...
|
|
can/will be used as it then makes the common cases save 16KB of data for each
easy handle that isn't used for pipelining.
|
|
function that deprecates the curl_multi_socket() function. Using the new
function the application tell libcurl what action that was found in the
socket that it passes in. This gives a significant performance boost as it
allows libcurl to avoid a call to poll()/select() for every call to
curl_multi_socket*().
|
|
|
|
easy handles are added to a multi handle, by avoiding the looping over all
the handles to find which one to remove.
|
|
the multi interface. Note that it still does a part of the connection in a
blocking manner.
|
|
"case label value exceeds maximum value for type" and
"comparison is always false due to limited range of data type"
Both triggered when using a bool variable as the switch variable
in a switch statement and using enums for the case targets.
|
