aboutsummaryrefslogtreecommitdiff
path: root/lib/urldata.h
AgeCommit message (Collapse)Author
2019-01-10multi: multiplexing improvementsDaniel Stenberg
Fixes #3436 Closes #3448 Problem 1 After LOTS of scratching my head, I eventually realized that even when doing 10 uploads in parallel, sometimes the socket callback to the application that tells it what to wait for on the socket, looked like it would reflect the status of just the single transfer that just changed state. Digging into the code revealed that this was indeed the truth. When multiple transfers are using the same connection, the application did not correctly get the *combined* flags for all transfers which then could make it switch to READ (only) when in fact most transfers wanted to get told when the socket was WRITEABLE. Problem 1b A separate but related regression had also been introduced by me when I cleared connection/transfer association better a while ago, as now the logic couldn't find the connection and see if that was marked as used by more transfers and then it would also prematurely remove the socket from the socket hash table even in times other transfers were still using it! Fix 1 Make sure that each socket stored in the socket hash has a "combined" action field of what to ask the application to wait for, that is potentially the ORed action of multiple parallel transfers. And remove that socket hash entry only if there are no transfers left using it. Problem 2 The socket hash entry stored an association to a single transfer using that socket - and when curl_multi_socket_action() was called to tell libcurl about activities on that specific socket only that transfer was "handled". This was WRONG, as a single socket/connection can be used by numerous parallel transfers and not necessarily a single one. Fix 2 We now store a list of handles in the socket hashtable entry and when libcurl is told there's traffic for a particular socket, it now iterates over all known transfers using that single socket.
2018-12-27hostip: support wildcard hostsClaes Jakobsson
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are try-last so any non-wildcard entry is resolved first. If specified, any host not matched by another CURLOPT_RESOLVE config will use this as fallback. Example send a.com to 10.0.0.1 and everything else to 10.0.0.2: curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \ https://a.com https://b.com This is probably quite similar to using: --connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443 Closes #3406 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-17pingpong: change default response timeout to 120 secondsDaniel Stenberg
Previously it was 30 minutes
2018-12-14http: Implement trailing headers for chunked transfersAyoub Boudhar
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION options that allow a callback based approach to sending trailing headers with chunked transfers. The test server (sws) was updated to take into account the detection of the end of transfer in the case of trailing headers presence. Test 1591 checks that trailing headers can be sent using libcurl. Closes #3350
2018-11-22host names: allow trailing dot in name resolve, then strip itTobias Hintze
Delays stripping of trailing dots to after resolving the hostname. Fixes #3022 Closes #3222
2018-11-09setopt: add CURLOPT_CURLUJim Fuller
Allows an application to pass in a pre-parsed URL via a URL handle. Closes #3227
2018-10-25urldata: Fix comment in headerMichael Kaufmann
The "connecting" function is used by multiple protocols, not only FTP
2018-10-08spelling fixes [ci skip]Viktor Szakats
as detected by codespell 1.14.0 Closes https://github.com/curl/curl/pull/3114 Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-09-22url: use the URL API internally as wellDaniel Stenberg
... to make it a truly unified URL parser. Closes #3017
2018-09-07upkeep: add a connection upkeep API: curl_easy_conn_upkeep()Max Dymond
Add functionality so that protocols can do custom keepalive on their connections, when an external API function is called. Add docs for the new options in 7.62.0 Closes #1641
2018-09-06CURLOPT_UPLOAD_BUFFERSIZE: set upload buffer sizeDaniel Stenberg
This is step 3 of #2888. Fixes #2888 Closes #2896
2018-09-06setopt: add CURLOPT_DOH_URLDaniel Stenberg
Closes #2668
2018-09-05tests: add unit tests for url.cJim Fuller
Approved-by: Daniel Gustafsson Closes #2937
2018-08-18upload: change default UPLOAD_BUFSIZE to 64KBDaniel Stenberg
To make uploads significantly faster in some circumstances. Part 2 of #2888 Closes #2892
2018-08-18upload: allocate upload buffer on-demandDaniel Stenberg
Saves 16KB on the easy handle for operations that don't need that buffer. Part 1 of #2888
2018-08-18vtls: reinstantiate engine on duplicated handlesLaurent Bonnans
Handles created with curl_easy_duphandle do not use the SSL engine set up in the original handle. This fixes the issue by storing the engine name in the internal url state and setting the engine from its name inside curl_easy_duphandle. Reported-by: Anton Gerasimov Signed-of-by: Laurent Bonnans Fixes #2829 Closes #2833
2018-08-16urldata: remove unused pipe_broke struct fieldDaniel Stenberg
This struct field is never set TRUE in any existing code path. This change removes the field completely. Closes #2871
2018-08-13http: fix for tiny "HTTP/0.9" responseDaniel Stenberg
Deal with tiny "HTTP/0.9" (header-less) responses by checking the status-line early, even before a full "HTTP/" is received to allow detecting 0.9 properly. Test 1266 and 1267 added to verify. Fixes #2420 Closes #2872
2018-07-20http2: several cleanupsDaniel Stenberg
- separate easy handle from connections better - added asserts on a number of places - added sanity check of pipelines for debug builds Closes #2751
2018-07-11conn: remove the boolean 'inuse' fieldDaniel Stenberg
... as the usage needs to be counted.
2018-06-12Curl_debug: remove dead printhost codeDaniel Stenberg
The struct field is never set (since 5e0d9aea3) so remove the use of it and remove the connectdata pointer from the prototype. Reported-by: Tejas Bug: https://curl.haxx.se/mail/lib-2018-06/0054.html Closes #2647
2018-06-11openssl: assume engine support in 1.0.1 or laterDaniel Stenberg
Previously it was checked for in configure/cmake, but that would then leave other build systems built without engine support. While engine support probably existed prior to 1.0.1, I decided to play safe. If someone experience a problem with this, we can widen the version check. Fixes #2641 Closes #2644
2018-06-03spelling fixesViktor Szakats
Detected using the `codespell` tool (version 1.13.0). Also secure and fix an URL.
2018-05-31option: disallow username in URLBjörn Stenberg
Adds CURLOPT_DISALLOW_USERNAME_IN_URL and --disallow-username-in-url. Makes libcurl reject URLs with a username in them. Closes #2340
2018-05-29setopt: add TLS 1.3 ciphersuitesDaniel Stenberg
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS. curl: added --tls13-ciphers and --proxy-tls13-ciphers Fixes #2435 Reported-by: zzq1015 on github Closes #2607
2018-05-28psl: use latest psl and refresh it periodicallyPatrick Monnerat
The latest psl is cached in the multi or share handle. It is refreshed before use after 72 hours. New share lock CURL_LOCK_DATA_PSL controls the psl cache sharing. If the latest psl is not available, the builtin psl is used. Reported-by: Yaakov Selkowitz Fixes #2553 Closes #2601
2018-05-18docs: mention HAproxy protocol "version 1"Aleks
...as there's also a version 2. Closes #2579
2018-05-14http2: use the correct function pointer typedefDaniel Stenberg
Fixes gcc-8 picky compiler warnings Reported-by: Rikard Falkeborn Bug: #2560 Closes #2568
2018-04-20http2: handle GOAWAY properlyDaniel Stenberg
When receiving REFUSED_STREAM, mark the connection for close and retry streams accordingly on another/fresh connection. Reported-by: Terry Wu Fixes #2416 Fixes #1618 Closes #2510
2018-04-16ntlm_sspi: fix authentication using Credential Managertoughengineer
If you pass empty user/pass asking curl to use Windows Credential Storage (as stated in the docs) and it has valid credentials for the domain, e.g. curl -v -u : --ntlm example.com currently authentication fails. This change fixes it by providing proper SPN string to the SSPI API calls. Fixes https://github.com/curl/curl/issues/1622 Closes https://github.com/curl/curl/pull/1660
2018-04-16urldata: make service names unconditionalMarcel Raad
The ifdefs have become quite long. Also, the condition for the definition of CURLOPT_SERVICE_NAME and for setting it from CURLOPT_SERVICE_NAME have diverged. We will soon also need the two options for NTLM, at least when using SSPI, for https://github.com/curl/curl/pull/1660. Just make the definitions unconditional to make that easier. Closes https://github.com/curl/curl/pull/2479
2018-03-17resolve: add CURLOPT_DNS_SHUFFLE_ADDRESSESRick Deist
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request shuffling of IP addresses returned for a hostname when there is more than one. This is useful when the application knows that a round robin approach is appropriate and is willing to accept the consequences of potentially discarding some preference order returned by the system's implementation. Closes #1694
2018-03-17CURLOPT_HAPROXYPROTOCOL: support the HAProxy PROXY protocolLawrence Matthews
Add --haproxy-protocol for the command line tool Closes #2162
2018-03-16cleanup: misc typos in strings and commentsluz.paz
Found via `codespell` Closes #2389
2018-02-23spelling fixesViktor Szakats
Detected using the `codespell` tool. Also contains one URL protocol upgrade. Closes https://github.com/curl/curl/pull/2334
2018-02-21url: Add option CURLOPT_RESOLVER_START_FUNCTIONFrancisco Sedano
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that will be called every time before a new resolve request is started (ie before a host is resolved) with a pointer to backend-specific resolver data. Currently this is only useful for ares. - Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to pass to the resolver start callback. Closes https://github.com/curl/curl/pull/2311
2018-02-20url: Add option CURLOPT_HAPPY_EYEBALLS_TIMEOUTAnders Bakken
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy eyeball timeout value. - Add new optval macro CURL_HET_DEFAULT to represent the default happy eyeballs timeout value (currently 200 ms). - Add new tool option --happy-eyeballs-timeout-ms to expose CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the other -timeout options in the tool expect seconds not milliseconds. Closes https://github.com/curl/curl/pull/2260
2018-01-30time: support > year 2038 time stamps for system with 32bit longDaniel Stenberg
... with the introduction of CURLOPT_TIMEVALUE_LARGE and CURLINFO_FILETIME_T. Fixes #2238 Closes #2264
2018-01-22http: prevent custom Authorization headers in redirectsDaniel Stenberg
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how curl already handles Authorization headers created internally. Note: this changes behavior slightly, for the sake of reducing mistakes. Added test 317 and 318 to verify. Reported-by: Craig de Stigter Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
2018-01-08progress: calculate transfer speed on milliseconds if possibleDaniel Stenberg
to increase accuracy for quick transfers Fixes #2200 Closes #2206
2017-12-07CONNECT: keep close connection flag in http_connect_state structZachary Seguin
Fixes #2088 Closes #2157
2017-12-06configure: check for netinet/in6.hRandall S. Becker
Needed by HPE NonStop NSE and NSX systems Fixes #2146 Closes #2155
2017-12-05conncache: fix several lock issuesDaniel Stenberg
If the lock is released before the dealings with the bundle is over, it may have changed by another thread in the mean time. Fixes #2132 Fixes #2151 Closes #2139
2017-12-01Added support for libssh SSH SCP back-endNikos Mavrogiannopoulos
libssh is an alternative library to libssh2. https://www.libssh.org/ That patch set also introduces support for ECDSA ed25519 keys, as well as gssapi authentication. Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
2017-12-01SSL: Avoid magic allocation of SSL backend specific dataJohannes Schindelin
Originally, my idea was to allocate the two structures (or more precisely, the connectdata structure and the four SSL backend-specific strucutres required for ssl[0..1] and proxy_ssl[0..1]) in one go, so that they all could be free()d together. However, getting the alignment right is tricky. Too tricky. So let's just bite the bullet and allocate the SSL backend-specific data separately. As a consequence, we now have to be very careful to release the memory allocated for the SSL backend-specific data whenever we release any connectdata. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Closes #2119
2017-11-27url: fix alignment of ssl_backend_data structJay Satiro
- Align the array of ssl_backend_data on a max 32 byte boundary. 8 is likely to be ok but I went with 32 for posterity should one of the ssl_backend_data structs change to contain a larger sized variable in the future. Prior to this change (since dev 70f1db3, release 7.56) the connectdata structure was undersized by 4 bytes in 32-bit builds with ssl enabled because long long * was mistakenly used for alignment instead of long long, with the intention being an 8 byte boundary. Also long long may not be an available type. The undersized connectdata could lead to oob read/write past the end in what was expected to be the last 4 bytes of the connection's secondary socket https proxy ssl_backend_data struct (the secondary socket in a connection is used by ftp, others?). Closes https://github.com/curl/curl/issues/2093 CVE-2017-8818 Bug: https://curl.haxx.se/docs/adv_2017-af0a.html
2017-11-13zlib/brotli: only include header files in modules needing themPatrick Monnerat
There is a conflict on symbol 'free_func' between openssl/crypto.h and zlib.h on AIX. This is an attempt to resolve it. Bug: https://curl.haxx.se/mail/lib-2017-11/0032.html Reported-By: Michael Felt
2017-11-05HTTP: implement Brotli content encodingPatrick Monnerat
This uses the brotli external library (https://github.com/google/brotli). Brotli becomes a feature: additional curl_version_info() bit and structure fields are provided for it and CURLVERSION_NOW bumped. Tests 314 and 315 check Brotli content unencoding with correct and erroneous data. Some tests are updated to accomodate with the now configuration dependent parameters of the Accept-Encoding header.
2017-11-05HTTP: support multiple Content-EncodingsPatrick Monnerat
This is implemented as an output streaming stack of unencoders, the last calling the client write procedure. New test 230 checks this feature. Bug: https://github.com/curl/curl/pull/2002 Reported-By: Daniel Bankhead