aboutsummaryrefslogtreecommitdiff
path: root/lib/urldata.h
AgeCommit message (Collapse)Author
2015-04-28Negotiate: custom service names for SPNEGO.Linus Nielsen
* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME. * Add new curl options, --proxy-service-name and --service-name.
2015-03-24CURLOPT_PATH_AS_IS: addedDaniel Stenberg
--path-as-is is the command line option Added docs in curl.1 and CURLOPT_PATH_AS_IS.3 Added test in test 1241
2015-03-20url: add CURLOPT_SSL_FALSESTART optionAlessandro Ghedini
This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart.
2015-03-19axtls: version 1.5.2 now requires that config.h be manually includedDan Fandrich
2015-03-07http2: use CURL_HTTP_VERSION_* symbols instead of NPN_*Daniel Stenberg
Since they already exist and will make comparing easier
2015-03-07urldata: remove unused asked_for_h2 fieldAlessandro Ghedini
2015-03-06urldata: fix gnutls buildDaniel Stenberg
2015-03-05openssl: remove all uses of USE_SSLEAYDaniel Stenberg
SSLeay was the name of the library that was subsequently turned into OpenSSL many moons ago (1999). curl does not work with the old SSLeay library since years. This is now reflected by only using USE_OPENSSL in code that depends on OpenSSL.
2015-01-16url: add CURLOPT_SSL_VERIFYSTATUS optionAlessandro Ghedini
This option can be used to enable/disable certificate status verification using the "Certificate Status Request" TLS extension defined in RFC6066 section 8. This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the certificate status verification fails, and the Curl_ssl_cert_status_request() function, used to check whether the SSL backend supports the status_request extension.
2014-12-26code/docs: Use Unix rather than UNIX to avoid use of the trademarkSteve Holme
Use Unix when generically writing about Unix based systems as UNIX is the trademark and should only be used in a particular product's name.
2014-12-16IPV6: address scope != scope idPatrick Monnerat
There was a confusion between these: this commit tries to disambiguate them. - Scope can be computed from the address itself. - Scope id is scope dependent: it is currently defined as 1-based local interface index for link-local scoped addresses, and as a site index(?) for (obsolete) site-local addresses. Linux only supports it for link-local addresses. The URL parser properly parses a scope id as an interface index, but stores it in a field named "scope": confusion. The field has been renamed into "scope_id". Curl_if2ip() used the scope id as it was a scope. This caused failures to bind to an interface. Scope is now computed from the addresses and Curl_if2ip() matches them. If redundantly specified in the URL, scope id is check for mismatch with the interface index. This commit should fix SF bug #1451.
2014-12-09http2: avoid logging neg "failure" if h2 was not requestedDaniel Stenberg
2014-12-04docs: Fix FAILONERROR typosAnthon Pang
It returns error for >= 400 HTTP responses. Bug: https://github.com/bagder/curl/pull/129
2014-12-04libcurl: add UNIX domain sockets supportPeter Wu
The ability to do HTTP requests over a UNIX domain socket has been requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a discussion happened, no patch seems to get through. I decided to give it a go since I need to test a nginx HTTP server which listens on a UNIX domain socket. One patch [3] seems to make it possible to use the CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket. Another person wrote a Go program which can do HTTP over a UNIX socket for Docker[4] which uses a special URL scheme (though the name contains cURL, it has no relation to the cURL library). This patch considers support for UNIX domain sockets at the same level as HTTP proxies / IPv6, it acts as an intermediate socket provider and not as a separate protocol. Since this feature affects network operations, a new feature flag was added ("unix-sockets") with a corresponding CURL_VERSION_UNIX_SOCKETS macro. A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This option enables UNIX domain sockets support for all requests on the handle (replacing IP sockets and skipping proxies). A new configure option (--enable-unix-sockets) and CMake option (ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I deliberately did not mark this feature as advanced, this is a feature/component that should easily be available. [0]: http://curl.haxx.se/mail/lib-2008-04/0279.html [1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/ [2]: http://sourceforge.net/p/curl/feature-requests/53/ [3]: http://curl.haxx.se/mail/lib-2008-04/0361.html [4]: https://github.com/Soulou/curl-unix-socket Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-12-03sasl_gssapi: Added GSS-API based Kerberos V5 variablesSteve Holme
2014-11-30smb: Added initial SMB functionalityBill Nagel
Initial implementation of the SMB/CIFS protocol.
2014-11-29smb: Added SMB protocol and port definitionsBill Nagel
Added the necessary protocol and port definitions in order to support SMB/CIFS.
2014-11-16kerberos: Use symbol qualified with _KERBEROS5Michael Osipov
For consistency renamed USE_KRB5 to USE_KERBEROS5.
2014-11-15urldata: Don't define sec_complete when no GSS-API support presentSteve Holme
This variable is only used with HAVE_GSSAPI is defined by the FTP code so let's place the definition with the other GSS-API based variables.
2014-11-15docs: Use consistent naming for KerberosMichael Osipov
2014-11-06http_digest: Reworked the SSPI based input token storageSteve Holme
Reworked the input token (challenge message) storage as what is passed to the buf and desc in the response generation are typically blobs of data rather than strings, so this is more in keeping with other areas of the SSPI code, such as the NTLM message functions.
2014-11-06http_digest: Added required SSPI based variables to digest structureSteve Holme
2014-11-05curl_easy_duphandle: CURLOPT_COPYPOSTFIELDS read out of boundsDaniel Stenberg
When duplicating a handle, the data to post was duplicated using strdup() when it could be binary and contain zeroes and it was not even zero terminated! This caused read out of bounds crashes/segfaults. Since the lib/strdup.c file no longer is easily shared with the curl tool with this change, it now uses its own version instead. Bug: http://curl.haxx.se/docs/adv_20141105.html CVE: CVE-2014-3707 Reported-By: Symeon Paraschoudis
2014-11-02sasl: Fixed Kerberos V5 inclusion when CURL_DISABLE_CRYPTO_AUTH is usedSteve Holme
Typically the USE_WINDOWS_SSPI definition would not be used when the CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication data structures and functions would incorrectly be used when they shouldn't be. Introduced a new USE_KRB5 definition that takes into account the use of CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
2014-10-29transfer: drop the code handling the ssl_connect_retry flagKamil Dudka
Its last use has been removed by the previous commit.
2014-10-26sspi: Renamed max token length variablesSteve Holme
Code cleanup to try and synchronise code between the different SSPI based authentication mechanisms.
2014-10-25ntlm: Only define ntlm data structure when USE_NTLM is definedSteve Holme
2014-10-25ntlm: Changed handles to be dynamic like other SSPI handlesSteve Holme
Code cleanup to try and synchronise code between the different SSPI based authentication mechanisms.
2014-10-25ntlm: Renamed handle variables to match other SSPI structuresSteve Holme
Code cleanup to try and synchronise code between the different SSPI based authentication mechanisms.
2014-10-25ntlm: Renamed SSPI based input token variablesSteve Holme
Code cleanup to try and synchronise code between the different SSPI based authentication mechanisms.
2014-10-16ntlm: Avoid unnecessary buffer allocation for SSPI based type-2 tokenSteve Holme
2014-10-13vtls: remove QsoSSLPatrick Monnerat
2014-10-07SSL: implement public key pinningmoparisthebest
Option --pinnedpubkey takes a path to a public key in DER format and only connect if it matches (currently only implemented with OpenSSL). Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt(). Extract a public RSA key from a website like so: openssl s_client -connect google.com:443 2>&1 < /dev/null | \ sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \ | openssl rsa -pubin -outform DER > google.com.der
2014-08-14urldata.h: Fixed compilation warnings from commit 3ec253532eSteve Holme
warning: extra tokens at end of #endif directive
2014-08-14urldata: Introduced a GSSAPI (Kerberos V5) data structureSteve Holme
Added a kerberos5data structure which is similar in nature to the ntlmdata and negotiatedata structures.
2014-08-09http_negotiate_sspi: Use a dynamic buffer for SPN generationSteve Holme
Updated to use a dynamic buffer for the SPN generation via the recently introduced Curl_sasl_build_spn() function rather than a fixed buffer of 1024 characters, which should have been more than enough, but by using the new function removes the need for another variable sname to do the wide character conversion in Unicode builds.
2014-08-08ntlm: Fixed hard coded buffer for SSPI based auth packet generationSteve Holme
Given the SSPI package info query indicates a token size of 2888 bytes, and as with the Winbind code and commit 9008f3d56, use a dynamic buffer for the Type-1 and Type-3 message generation rather than a fixed buffer of 1024 bytes.
2014-08-06http_negotiate_sspi: Fixed specific username and password not workingSteve Holme
Bug: http://curl.haxx.se/mail/lib-2014-06/0224.html Reported-by: Leonardo Rosati
2014-07-23docs: Improve inline GSS-API naming in code documentationMichael Osipov
2014-07-23curl.h/features: Deprecate GSS-Negotiate macros due to bad namingMichael Osipov
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE - CURL_VERSION_GSSNEGOTIATE is deprecated which is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and CURUL_VERSION_SPNEGO now. - Remove display of feature 'GSS-Negotiate'
2014-07-23HTTP: Remove checkprefix("GSS-Negotiate")Michael Osipov
That auth mech has never existed neither on MS nor on Unix side. There is only Negotiate over SPNEGO.
2014-07-04nss: make the list of CRL items globalKamil Dudka
Otherwise NSS could use an already freed item for another connection.
2014-07-04nss: fix a memory leak when CURLOPT_CRLFILE is usedKamil Dudka
2014-05-28gnutls: don't use deprecated type names anymoreAlessandro Ghedini
2014-05-22bits.close: introduce connection close trackingDaniel Stenberg
Make all code use connclose() and connkeep() when changing the "close state" for a connection. These two macros take a string argument with an explanation, and debug builds of curl will include that in the debug output. Helps tracking connection re-use/close issues.
2014-05-15timers: fix timer regression involving redirects / reconnectsDaniel Stenberg
In commit 0b3750b5c23c25f (released in 7.36.0) we fixed a timeout issue but instead broke the timings. To fix this, I introduce a new timestamp to use for the timeouts and restored the previous timestamp and timestamp position so that the old timer functionality is restored. In addition to that, that change also broke connection timeouts for when more than one connect was used (as it would then count the total time from the first connect and not for the most recent one). Now Curl_timeleft() has been modified so that it checks against different start times depending on which timeout it checks. Test 1303 is updated accordingly. Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html Reported-by: Ryan Braud
2014-04-26INFILESIZE: fields in UserDefined must not be changed run-timeDaniel Stenberg
set.infilesize in this case was modified in several places, which could lead to repeated requests using the same handle to get unintendent/wrong consequences based on what the previous request did!
2014-04-23handler: make 'protocol' always specified as a single bitDaniel Stenberg
This makes the findprotocol() function work as intended so that libcurl can properly be restricted to not support HTTP while still supporting HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS bits in the protocol field. This fixes --proto and --proto-redir for most SSL protocols. This is done by adding a few new convenience defines that groups HTTP and HTTPS, FTP and FTPS etc that should then be used when the code wants to check for both protocols at once. PROTO_FAMILY_[protocol] style. Bug: https://github.com/bagder/curl/pull/97 Reported-by: drizzt
2014-04-22nss: implement non-blocking SSL handshakeKamil Dudka
2014-04-04CURLOPT_HEADEROPT: addedDaniel Stenberg
Modified the logic so that CURLOPT_HEADEROPT now controls if PROXYHEADER is actually used or not.