aboutsummaryrefslogtreecommitdiff
path: root/lib/vtls/openssl.c
AgeCommit message (Collapse)Author
2019-05-16cleanup: remove FIXME and TODO commentsDaniel Stenberg
They serve very little purpose and mostly just add noise. Most of them have been around for a very long time. I read them all before removing or rephrasing them. Ref: #3876 Closes #3883
2019-05-08OpenSSL: Report -fips in version if OpenSSL is built with FIPSRicky Leverence
Older versions of OpenSSL report FIPS availabilty via an OPENSSL_FIPS define. It uses this define to determine whether to publish -fips at the end of the version displayed. Applications that utilize the version reported by OpenSSL will see a mismatch if they compare it to what curl reports, as curl is not modifying the version in the same way. This change simply adds a check to see if OPENSSL_FIPS is defined, and will alter the reported version to match what OpenSSL itself provides. This only appears to be applicable in versions of OpenSSL <1.1.1 Closes #3771
2019-05-01multi: provide Curl_multiuse_state to update informationDaniel Stenberg
As soon as a TLS backend gets ALPN conformation about the specific HTTP version it can now set the multiplex situation for the "bundle" and trigger moving potentially queued up transfers to the CONNECT state.
2019-04-12openssl: mark connection for close on TLS close_notifyDaniel Stenberg
Without this, detecting and avoid reusing a closed TLS connection (without a previous GOAWAY) when doing HTTP/2 is tricky. Reported-by: Tom van der Woerdt Fixes #3750 Closes #3763
2019-03-20openssl: if cert type is ENG and no key specified, key is ENG tooDavid Woodhouse
Fixes #3692 Closes #3692
2019-03-15configure: add --with-amisslChris Young
AmiSSL is an Amiga native library which provides a wrapper over OpenSSL. It also requires all programs using it to use bsdsocket.library directly, rather than accessing socket functions through clib, which libcurl was not necessarily doing previously. Configure will now check for the headers and ensure they are included if found. Closes #3677
2019-02-25OpenSSL: add support for TLS ASYNC stateBernd Mueller
Closes #3591
2019-01-16openssl: fix the SSL_get_tlsext_status_ocsp_resp callDaniel Stenberg
.... to not pass in a const in the second argument as that's not how it is supposed to be used and might cause compiler warnings. Reported-by: Pavel Pavlov Fixes #3477 Closes #3478
2019-01-13openssl: adapt to 3.0.0, OpenSSL_version_num() is deprecatedDaniel Stenberg
OpenSSL_version() replaces OpenSSL_version_num() Closes #3462
2018-12-07openssl: fix unused variable compiler warning with old opensslBen Greear
URL: https://curl.haxx.se/mail/lib-2018-11/0055.html Closes #3347
2018-12-05openssl: do not use file BIOs if not requestedGergely Nagy
Moves the file handling BIO calls to the branch of the code where they are actually used. Closes #3339
2018-11-23snprintf: renamed and we now only use msnprintf()Daniel Stenberg
The function does not return the same value as snprintf() normally does, so readers may be mislead into thinking the code works differently than it actually does. A different function name makes this easier to detect. Reported-by: Tomas Hoger Assisted-by: Daniel Gustafsson Fixes #3296 Closes #3297
2018-11-21openssl: support session resume with TLS 1.3Michael Kaufmann
Session resumption information is not available immediately after a TLS 1.3 handshake. The client must wait until the server has sent a session ticket. Use OpenSSL's "new session" callback to get the session information and put it into curl's session cache. For TLS 1.3 sessions, this callback will be invoked after the server has sent a session ticket. The "new session" callback is invoked only if OpenSSL's session cache is enabled, so enable it and use the "external storage" mode which lets curl manage the contents of the session cache. A pointer to the connection data and the sockindex are now saved as "SSL extra data" to make them available to the callback. This approach also works for old SSL/TLS versions and old OpenSSL versions. Reviewed-by: Daniel Stenberg <daniel@haxx.se> Fixes #3202 Closes #3271
2018-11-21ssl: fix compilation with OpenSSL 0.9.7Michael Kaufmann
- ENGINE_cleanup() was used without including "openssl/engine.h" - enable engine support for OpenSSL 0.9.7 Closes #3266
2018-11-21openssl: disable TLS renegotiation with BoringSSLDaniel Stenberg
Since we're close to feature freeze, this change disables this feature with an #ifdef. Define ALLOW_RENEG at build-time to enable. This could be converted to a bit for CURLOPT_SSL_OPTIONS to let applications opt-in this. Concern-raised-by: David Benjamin Fixes #3283 Closes #3293
2018-11-20ssl: replace all internal uses of CURLE_SSL_CACERTHan Han
Closes #3291
2018-11-16openssl: do not log excess "TLS app data" lines for TLS 1.3Peter Wu
The SSL_CTX_set_msg_callback callback is not just called for the Handshake or Alert protocols, but also for the raw record header (SSL3_RT_HEADER) and the decrypted inner record type (SSL3_RT_INNER_CONTENT_TYPE). Be sure to ignore the latter to avoid excess debug spam when using `curl -v` against a TLSv1.3-enabled server: * TLSv1.3 (IN), TLS app data, [no content] (0): (Following this message, another callback for the decrypted handshake/alert messages will be be present anyway.) Closes https://github.com/curl/curl/pull/3281
2018-11-09openssl: support BoringSSL TLS renegotiationJérémy Rocher
As per BoringSSL porting documentation [1], BoringSSL rejects peer renegotiations by default. curl fails when trying to authenticate to server through client certificate if it is requested by server after the initial TLS handshake. Enable renegotiation by default with BoringSSL to get same behavior as with OpenSSL. This is done by calling SSL_set_renegotiate_mode [2] which was introduced in commit 1d5ef3bb1eb9 [3]. 1 - https://boringssl.googlesource.com/boringssl/+/HEAD/PORTING.md#tls-renegotiation 2 - https://boringssl.googlesource.com/boringssl/+/master/include/openssl/ssl.h#3482 3 - https://boringssl.googlesource.com/boringssl/+/1d5ef3bb1eb97848617db5e7d633d735a401df86 Signed-off-by: Jérémy Rocher <rocher.jeremy@gmail.com> Fixes #3258 Closes #3259
2018-10-27openssl: output the correct cipher list on TLS 1.3 errorDaniel Stenberg
When failing to set the 1.3 cipher suite, the wrong string pointer would be used in the error message. Most often saying "(nil)". Reported-by: Ricky-Tigg on github Fixes #3178 Closes #3180
2018-10-26openssl: make 'done' a proper booleanDaniel Gustafsson
Closes #3176
2018-10-18travis: add build for "configure --disable-verbose"Daniel Stenberg
Closes #3144
2018-10-08spelling fixes [ci skip]Viktor Szakats
as detected by codespell 1.14.0 Closes https://github.com/curl/curl/pull/3114 Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-09-24openssl: load built-in engines tooDaniel Stenberg
Regression since 38203f1 Reported-by: Jean Fabrice Fixes #3023 Closes #3040
2018-09-24OpenSSL: enable TLS 1.3 post-handshake authChristian Heimes
OpenSSL 1.1.1 requires clients to opt-in for post-handshake authentication. Fixes: https://github.com/curl/curl/issues/3026 Signed-off-by: Christian Heimes <christian@python.org> Closes https://github.com/curl/curl/pull/3027
2018-09-20vtls: fix ssl version "or later" behavior change for many backendsJay Satiro
- Treat CURL_SSLVERSION_MAX_NONE the same as CURL_SSLVERSION_MAX_DEFAULT. Prior to this change NONE would mean use the minimum version also as the maximum. This is a follow-up to 6015cef which changed the behavior of setting the SSL version so that the requested version would only be the minimum and not the maximum. It appears it was (mostly) implemented in OpenSSL but not other backends. In other words CURL_SSLVERSION_TLSv1_0 used to mean use just TLS v1.0 and now it means use TLS v1.0 *or later*. - Fix CURL_SSLVERSION_MAX_DEFAULT for OpenSSL. Prior to this change CURL_SSLVERSION_MAX_DEFAULT with OpenSSL was erroneously treated as always TLS 1.3, and would cause an error if OpenSSL was built without TLS 1.3 support. Co-authored-by: Daniel Gustafsson Fixes https://github.com/curl/curl/issues/2969 Closes https://github.com/curl/curl/pull/3012
2018-09-14openssl: show "proper" version number for libressl buildsDaniel Stenberg
Closes #2989
2018-09-14openssl: assume engine support in 0.9.8 or laterRainer Jung
Fixes #2983 Closes #2988
2018-09-12openssl: fix gcc8 warningJay Satiro
- Use memcpy instead of strncpy to copy a string without termination, since gcc8 warns about using strncpy to copy as many bytes from a string as its length. Suggested-by: Viktor Szakats Closes https://github.com/curl/curl/issues/2980
2018-09-07configure: add option to disable automatic OpenSSL config loadingPhilipp Waehnert
Sometimes it may be considered a security risk to load an external OpenSSL configuration automatically inside curl_global_init(). The configuration option --disable-ssl-auto-load-config disables this automatism. The Windows build scripts winbuild/Makefile.vs provide a corresponding option ENABLE_SSL_AUTO_LOAD_CONFIG accepting a boolean value. Setting neither of these options corresponds to the previous behavior loading the external OpenSSL configuration automatically. Fixes #2724 Closes #2791
2018-09-06openssl: return CURLE_PEER_FAILED_VERIFICATION on failure to parse issuerHan Han
Failure to extract the issuer name from the server certificate should return a more specific error code like on other TLS backends.
2018-09-03openssl: Fix setting TLS 1.3 cipher suitesJay Satiro
The flag indicating TLS 1.3 cipher support in the OpenSSL backend was missing. Bug: https://github.com/curl/curl/pull/2607#issuecomment-417283187 Reported-by: Kamil Dudka Closes #2926
2018-08-10openssl: fix potential NULL pointer deref in is_pkcs11_uriDaniel Stenberg
Follow-up to 298d2565e Coverity CID 1438387
2018-08-09openssl: fix debug messagesDaniel Jelinski
Fixes #2806 Closes #2843
2018-08-08ssl: set engine implicitly when a PKCS#11 URI is providedAnderson Toshiyuki Sasaki
This allows the use of PKCS#11 URI for certificates and keys without setting the corresponding type as "ENG" and the engine as "pkcs11" explicitly. If a PKCS#11 URI is provided for certificate, key, proxy_certificate or proxy_key, the corresponding type is set as "ENG" if not provided and the engine is set to "pkcs11" if not provided. Acked-by: Nikos Mavrogiannopoulos Closes #2333
2018-07-11openssl: assume engine support in 1.0.0 or laterPaul Howarth
Commit 38203f1585da changed engine detection to be version-based, with a baseline of openssl 1.0.1. This does in fact break builds with openssl 1.0.0, which has engine support - the configure script detects that ENGINE_cleanup() is available - but <openssl/engine.h> doesn't get included to declare it. According to upstream documentation, engine support was added to mainstream openssl builds as of version 0.9.7: https://github.com/openssl/openssl/blob/master/README.ENGINE This commit drops the version test down to 1.0.0 as version 1.0.0d is the oldest version I have to test with. Closes #2732
2018-06-29openssl: Remove some dead codeGaurav Malhotra
Closes #2698
2018-06-29openssl: make the requested TLS version the *minimum* wantedDaniel Stenberg
The code treated the set version as the *exact* version to require in the TLS handshake, which is not what other TLS backends do and probably not what most people expect either. Reported-by: Andreas Olsson Assisted-by: Gaurav Malhotra Fixes #2691 Closes #2694
2018-06-29openssl: allow TLS 1.3 by defaultDaniel Stenberg
Reported-by: Andreas Olsson Fixes #2692 Closes #2693
2018-06-12Curl_debug: remove dead printhost codeDaniel Stenberg
The struct field is never set (since 5e0d9aea3) so remove the use of it and remove the connectdata pointer from the prototype. Reported-by: Tejas Bug: https://curl.haxx.se/mail/lib-2018-06/0054.html Closes #2647
2018-06-11openssl: assume engine support in 1.0.1 or laterDaniel Stenberg
Previously it was checked for in configure/cmake, but that would then leave other build systems built without engine support. While engine support probably existed prior to 1.0.1, I decided to play safe. If someone experience a problem with this, we can widen the version check. Fixes #2641 Closes #2644
2018-05-29setopt: add TLS 1.3 ciphersuitesDaniel Stenberg
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS. curl: added --tls13-ciphers and --proxy-tls13-ciphers Fixes #2435 Reported-by: zzq1015 on github Closes #2607
2018-05-17openssl: acknowledge --tls-max for default version tooDaniel Stenberg
... previously it only used the max setting if a TLS version was also explicitly asked for. Reported-by: byte_bucket Fixes #2571 Closes #2572
2018-05-10openssl: change FILE ops to BIO opsSunny Purushe
To make builds with VS2015 work. Recent changes in VS2015 _IOB_ENTRIES handling is causing problems. This fix changes the OpenSSL backend code to use BIO functions instead of FILE I/O functions to circumvent those problems. Closes #2512
2018-05-04vtls: use unified "supports" bitfield member in backendsDaniel Stenberg
... instead of previous separate struct fields, to make it easier to extend and change individual backends without having to modify them all. closes #2547
2018-04-20openssl: fix subjectAltName check on non-ASCII platformsStephan Mühlstrasser
Curl_cert_hostcheck operates with the host character set, therefore the ASCII subjectAltName string retrieved with OpenSSL must be converted to the host encoding before comparison. Closes #2493
2018-04-20openssl: Add support for OpenSSL 1.1.1 verbose-mode trace messagesJay Satiro
- Support handling verbose-mode trace messages of type SSL3_RT_INNER_CONTENT_TYPE, SSL3_MT_ENCRYPTED_EXTENSIONS, SSL3_MT_END_OF_EARLY_DATA, SSL3_MT_KEY_UPDATE, SSL3_MT_NEXT_PROTO, SSL3_MT_MESSAGE_HASH Reported-by: iz8mbw@users.noreply.github.com Fixes https://github.com/curl/curl/issues/2403
2018-04-06Revert "openssl: Don't add verify locations when verifypeer==0"Gaurav Malhotra
This reverts commit dc85437736e1fc90e689bb1f6c51c8f1aa9430eb. libcurl (with the OpenSSL backend) performs server certificate verification even if verifypeer == 0 and the verification result is available using CURLINFO_SSL_VERIFYRESULT. The commit that is being reverted caused the CURLINFO_SSL_VERIFYRESULT to not have useful information for the verifypeer == 0 use case (it would always have X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY). Closes #2451
2018-04-06tls: fix mbedTLS 2.7.0 build + handle sha256 failuresWyatt O'Day
(mbedtls 2.70 compiled with MBEDTLS_DEPRECATED_REMOVED) Closes #2453
2018-04-04openssl: provide defines for argument typecasts to build warning-freeDaniel Stenberg
... as OpenSSL >= 1.1.0 and libressl >= 2.7.0 use different argument types.
2018-04-04openssl: fix build with LibreSSL 2.7Bernard Spil
- LibreSSL 2.7 implements (most of) OpenSSL 1.1 API Fixes #2319 Closes #2447 Closes #2448 Signed-off-by: Bernard Spil <brnrd@FreeBSD.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 13:53:15 +0000