| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Do not try to resolve interfaces names via DNS by recognizing interface
names in a few ways. If the interface option argument has a prefix of
"if!" then treat the argument as only an interface. Similarly, if the
interface argument is the name of an interface (even if it does not have
an IP address assigned), treat it as an interface name. Finally, if the
interface argument is prefixed by "host!" treat it as a hostname that
must be resolved by /etc/hosts or DNS.
These changes allow a client using the multi interfaces to avoid
blocking on name resolution if the interface loses its IP address or
disappears.
|
|
Fixed the connection reuse detection in ConnectionExists() when
comparing a new connection that is non-SSL based against that of a SSL
based connection that has become so by being upgraded via TLS.
|
|
This is a regression since who knows when. When spotting that a HTTP
proxy is used we must not uncondititionally enable the HTTP protocol
since if we do tunneling through the proxy we're still using the target
protocol.
Reported by: Naveen Chandran
|
|
As a follow-up from commit d5b5f64bce3a8, clear the sock_accepted status
when such a socket is closed to avoid a re-used connection to retain the
state wrongly.
Bug: http://curl.haxx.se/mail/lib-2011-12/0079.html
|
|
|
|
If no SSLv2 was detected in OpenSSL by configure, then we enforce the
OPENSSL_NO_SSL2 define as it seems some people report it not being
defined properly in the OpenSSL headers.
|
|
When a 32 digit hex key is given as a hostkey md5 checksum, the code
would still run it against the knownhost check and not properly
acknowledge that the md5 should then be the sole guide for.
The verbose output now includes the evaluated MD5 hostkey checksum.
Some related source code comments were also updated.
Bug: http://curl.haxx.se/bug/view.cgi?id=3451592
Reported by: Reza Arbab
|
|
As there are different return codes for host vs proxy errors, this function
now properly returns the code properly depending on what was attempted to get
resolved.
Bug: http://curl.haxx.se/mail/archive-2011-12/0010.html
Reported by: Jason Liu
|
|
When making a distinction which return code to return, the code previously
only regarded HTTP proxies to be proxies and thus return host-related errors
for failures on other proxy types than HTTP. Now all proxy types will be
considered proxies...
|
|
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
|
|
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
|
|
Moved out into a separate function to work as a "generic" socket()
replacement.
|
|
Ensure that CURLE_OK is returned if setting the name servers is successfull.
|
|
If the socket callback function pointer hasn't been set, we must not
attempt to use it. Commit adc88ca20 made it more likely to occur.
|
|
If the first name server is not available, the multi interface does
not invoke the socket_cb when the DNS request to the first name server
timesout. Ensure that the list of sockets are always updated after
calling Curl_resolver_is_resolved.
This bug can be reproduced if Curl is complied with --enable_ares and
your code uses the multi socket interfaces and the
CURLMOPT_SOCKETFUNCTION option. To test try:
iptables -I INPUT \
-s $(sed -n -e '/name/{s/.* //p;q}' /etc/resolv.conf)/32 \
-j REJECT
and then run a program which uses the multi-interface.
|
|
Changed the eob detection to work across the whole of the buffer so that
lines that begin with a dot (which the server will have escaped) are
passed to the client application correctly.
|
|
|
|
By making sure the function can detect an "end of body" sequence
immediately on the first line, test 811 is now enabled.
|
|
Curl_pop3_write() now has a state machine that scans for the end of a
POP3 body so that the CR LF '.' CR LF sequence can come in everything
from one up to five subsequent packets.
Test case 810 is modified to use SLOWDOWN which makes the server pause
between each single byte and thus makes the POP3 body get sent to curl
basically one byte at a time.
|
|
|
|
|
|
Added convenience macro to use to check if a handle is using a shared
SSL session, and fixed so that Curl_ssl_close_all() doesn't lock when
the session isn't shared.
|
|
|
|
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
|
|
Macros that look like function calls need to be made so that we can use
semicolons properly for indentation and for reducing the risk for
mistakes when using them.
|
|
1) enables the Window Size option
2) allows the server to enable the echo mode
3) allows an app using libcurl to disable the default binary mode
Signed-off-by: Laurent Rabret
|
|
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
|
|
|
|
|
|
Bugfix: https handshake fails using gnutls 3 on windows
http://sourceforge.net/tracker/index.php?func=detail&aid=3441084&group_id=976&atid=100976
New gnutls versions have an error handler that knows about Winsock
errors, which is why gnutls_transport_set_global_errno() was deprecated
and then removed.
This is a correction of commit f5bb370 (blame me) which meant to
reimplement gnutls_transport_set_global_errno(), which is not necessary.
|
|
Regression: commit b998d95b (shipped first in release 7.22.0) made the
condition always equal false that should reset the TIMER_CONNECT timer
and call the Curl_verboseconnect() function.
Reported by: "Captain Basil"
Bug: http://curl.haxx.se/mail/archive-2011-11/0035.html
|
|
|
|
prefixing a command with '*' means it is allowed to fail without
aborting the chain actions
|
|
Also, check for the session sharing bit instead of comparing pointers
|
|
|
|
Previously the age counter would be counted individually in each easy
handle that shared SSL sessions!
|
|
|
|
|
|
When the user requests PORT with a specific port or port range, the code
could lock up in an endless loop. There's now an extra conditional that
makes sure to special treat the error and try the local address only
once so a second failure will abort the loop correctly.
Bug: http://curl.haxx.se/bug/view.cgi?id=3433968
Reported by: Gokhan Sengun
|
|
Just a sign of where the code originally was ripped out from. Now it is
generic "pingpong".
|
|
If a proxy offers several Authentication schemes where NTLM and
Negotiate are offered by the proxy and you tell libcurl not to use the
Negotiate scheme then the request never returns when the proxy answers
with its HTTP 407 reply.
It is reproducible by the following steps:
- Use a proxy that offers NTLM and Negotiate ( CURLOPT_PROXY and
CURLOPT_PROXYPORT )
- Tell libcurl NOT to use Negotiate CURL_EASY_SETOPT(CURLOPT_PROXYAUTH,
CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_NTLM )
- Start the request
The call to CURL_EASY_PERFORM never returns. If you switch on debug
logging you can see that libcurl issues a new request As soon as it
received the 407 reply. Instead it should return and set the response
code to 407.
Bug: http://curl.haxx.se/mail/lib-2011-10/0323.html
|
|
Move calling of ERR_remove_state(0) a.k.a ERR_remove_thread_state(NULL)
from Curl_ossl_close_all() to Curl_ossl_cleanup().
In this way ERR_remove_state(0) is now only called in libcurl by
curl_global_cleanup(). Previously it would get called by functions
curl_easy_cleanup(), curl_multi_cleanup and potentially each time a
connection was removed from a connection cache leading to premature
destruction of OpenSSL's thread local state hash.
Multi-threaded apps using OpenSSL enabled libcurl should still call
function ERR_remove_state(0) or ERR_remove_thread_state(NULL) at the
very end end of threads that do not call curl_global_cleanup().
|
|
|
|
Now called 'use_ssl' instead, which better matches the current CURLOPT
name and since the option is used for all pingpong protocols (at least)
it makes sense to not use 'ftp' in the name.
|
|
Use gnutls_priority_set_direct() instead of gnutls_protocol_set_priority().
Remove the gnutls_certificate_type_set_priority() use since x509 is the
default certificate type anyway.
Reported by: Vincent Torri
|
|
|
|
|
|
|
|
|
