aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2014-12-27nss: Don't ignore Curl_ssl_init_certinfo() OOM failureSteve Holme
2014-12-27nss: Use 'CURLcode result' for curl result codesSteve Holme
...and don't use CURLE_OK in failure/success comparisons.
2014-12-27getinfo: Code style policingSteve Holme
2014-12-27getinfo: Use 'CURLcode result' for curl result codesSteve Holme
2014-12-27darwinssl: Use 'CURLcode result' for curl result codesSteve Holme
2014-12-27polarssl: Use 'CURLcode result' for curl result codesSteve Holme
2014-12-27code/docs: Use correct case for IPv4 and IPv6Steve Holme
For consistency, as we seem to have a bit of a mixed bag, changed all instances of ipv4 and ipv6 in comments and documentations to use the correct case.
2014-12-26code/docs: Use Unix rather than UNIX to avoid use of the trademarkSteve Holme
Use Unix when generically writing about Unix based systems as UNIX is the trademark and should only be used in a particular product's name.
2014-12-26ip2ip.c: Fixed compilation warning when IPv6 Scope ID not supportedSteve Holme
if2ip.c:119: warning: unused parameter 'remote_scope_id' ...and some minor code style policing in the same function.
2014-12-26vtls: Don't set cert info count until memory allocation is successfulSteve Holme
Otherwise Curl_ssl_init_certinfo() can fail and set the num_of_certs member variable to the requested count, which could then be used incorrectly as libcurl closes down.
2014-12-26vtls: Use CURLcode for Curl_ssl_init_certinfo() return typeSteve Holme
The return type for this function was 0 on success and 1 on error. This was then examined by the calling functions and, in most cases, used to return CURLE_OUT_OF_MEMORY. Instead use CURLcode for the return type and return the out of memory error directly, propagating it up the call stack.
2014-12-25vtls: Use bool for Curl_ssl_getsessionid() return typeSteve Holme
The return type of this function is a boolean value, and even uses a bool internally, so use bool in the function declaration as well as the variables that store the return value, to avoid any confusion.
2014-12-25schannel: Minor code style policing for castsSteve Holme
2014-12-25schannel: Prefer 'CURLcode result' for curl result codesSteve Holme
2014-12-25cyassl: Prefer 'CURLcode result' for curl result codesSteve Holme
2014-12-24curl_ntlm_core.c: Fixed compilation warningsSteve Holme
curl_ntlm_core.c:301: warning: pointer targets in passing argument 2 of 'CryptImportKey' differ in signedness curl_ntlm_core.c:310: warning: passing argument 6 of 'CryptEncrypt' from incompatible pointer type curl_ntlm_core.c:540: warning: passing argument 4 of 'CryptGetHashParam' from incompatible pointer type
2014-12-24gtls: Use preferred 'CURLcode result'Steve Holme
2014-12-24openldap: Use standard naming for setup connection functionSteve Holme
Renamed ldap_setup() to ldap_setup_connection() to follow more widely used function naming.
2014-12-24rtmp: Use standard naming for setup connection functionSteve Holme
Renamed rtmp_setup() to rtmp_setup_connection() to follow more widely used function naming.
2014-12-24smb: Use standard naming for setup connection functionSteve Holme
Renamed smb_setup() to smb_setup_connection() to follow more widely used function naming.
2014-12-24config-win32.h: Fixed line length > 79 columnsSteve Holme
2014-12-24openssl: Prefer we don't use NULL in comparisonsSteve Holme
2014-12-23openssl.c Fix for compilation errors with older versions of OpenSSLSteve Holme
openssl.c:1408: error: 'TLS1_1_VERSION' undeclared openssl.c:1411: error: 'TLS1_2_VERSION' undeclared
2014-12-22openssl: fix SSL/TLS versions in verbose outputDaniel Stenberg
2014-12-22openssl: make it compile against openssl 1.1.0-DEV master branchDaniel Stenberg
2014-12-21openssl: warn for SRP set if SSLv3 is used, not for TLS versionDaniel Stenberg
... as it requires TLS and it was was left to warn on the default from when default was SSL...
2014-12-21smb: use memcpy() instead of strncpy()Daniel Stenberg
... as it never copies the trailing zero anyway and always just the four bytes so let's not mislead anyone into thinking it is actually treated as a string. Coverity CID: 1260214
2014-12-21VMS: Updates for 0740-0D1220John E. Malmberg
lib/setup-vms.h : VAX HP OpenSSL port is ancient, needs help. More defines to set symbols to uppercase. src/tool_main.c : Fix parameter to vms_special_exit() call. packages/vms/ : backup_gnv_curl_src.com : Fix the error message to have the correct package. build_curl-config_script.com : Rewrite to be more accurate. build_libcurl_pc.com : Use tool_version.h now. build_vms.com : Fix to handle lib/vtls directory. curl_gnv_build_steps.txt : Updated build procedure documentation. generate_config_vms_h_curl.com : * VAX does not support 64 bit ints, so no NTLM support for now. * VAX HP SSL port is ancient, needs some help. * Disable NGHTTP2 for now, not ported to VMS. * Disable UNIX_SOCKETS, not available on VMS yet. * HP GSSAPI port does not have gss_nt_service_name. gnv_link_curl.com : Update for new curl structure. pcsi_product_gnv_curl.com : Set up to optionally do a complete build.
2014-12-20non-ascii: Reduce variable usageSteve Holme
Removed 'next' variable in Curl_convert_form(). Rather than setting it from 'form->next' and using that to set 'form' after the conversion just use 'form = form->next' instead.
2014-12-20non-ascii: Prefer while loop rather than a do loopSteve Holme
This also removes the need to check that the 'form' argument is valid.
2014-12-20non-ascii: Reduce variable scopeSteve Holme
As 'result' isn't used out side the conversion callback code and previously caused variable shadowing in the libiconv based code.
2014-12-19non-ascii: We prefer 'CURLcode result'Steve Holme
This also fixes a variable shadowing issue when HAVE_ICONV is defined as rc was declared for the result code of libiconv based functions.
2014-12-18if2ip: dummy scope parameter for Curl_if2ip() call in SIOCGIFADDR-enabled code.Patrick Monnerat
2014-12-17parseurlandfillconn(): fix improper non-numeric scope_id stripping.Kyle J. McKay
Fixes SF bug 1149: http://sourceforge.net/p/curl/bugs/1449/
2014-12-16IPV6: address scope != scope idPatrick Monnerat
There was a confusion between these: this commit tries to disambiguate them. - Scope can be computed from the address itself. - Scope id is scope dependent: it is currently defined as 1-based local interface index for link-local scoped addresses, and as a site index(?) for (obsolete) site-local addresses. Linux only supports it for link-local addresses. The URL parser properly parses a scope id as an interface index, but stores it in a field named "scope": confusion. The field has been renamed into "scope_id". Curl_if2ip() used the scope id as it was a scope. This caused failures to bind to an interface. Scope is now computed from the addresses and Curl_if2ip() matches them. If redundantly specified in the URL, scope id is check for mismatch with the interface index. This commit should fix SF bug #1451.
2014-12-16connect: singleipconnect(): properly try other address families after failurePatrick Monnerat
2014-12-16SFTP: work-around servers that return zero size on STATDaniel Stenberg
Bug: http://curl.haxx.se/mail/lib-2014-12/0103.html Pathed-by: Marc Renault
2014-12-15darwinssl: fix incorrect usage of aprintf()Nick Zitzmann
Commit b13923f changed an snprintf() to use aprintf(), but the API usage wasn't correct, and was causing a crash to occur. This fixes it.
2014-12-14copyright: Updated the copyright year following recent updatesSteve Holme
2014-12-14lib: Fixed multiple code analysis warnings if SAL are availableMarc Hoersken
warning C28252: Inconsistent annotation for function: parameter has another annotation on this instance
2014-12-14smb.c: Fixed code analysis warningSteve Holme
smb.c:320: warning C6297: Arithmetic overflow: 32-bit value is shifted, then cast to 64-bit value. Result may not be an expected value
2014-12-14smb: Use HAVE_PROCESS_H for process.h inclusionSteve Holme
Rather than testing against _WIN32 use the preferred HAVE_PROCESS_H pre-processor define when including process.h.
2014-12-14darwinssl: aprintf() to allocate the session keyDaniel Stenberg
... to avoid using a fixed memory size that risks being too large or too small.
2014-12-14curl_schannel: Improvements to memory re-allocation strategyMarc Hoersken
- do not grow memory by doubling its size - do not leak previously allocated memory if reallocation fails - replace while-loop with a single check to make sure that the requested amount of data fits into the buffer Bug: http://curl.haxx.se/bug/view.cgi?id=1450 Reported-by: Warren Menzer
2014-12-14asyn-ares: We prefer use of 'CURLcode result'Steve Holme
2014-12-14curl_schannel.c: Data may be available before connection shutdownMarc Hoersken
2014-12-14http2: Use 'CURLcode result' for curl result codesSteve Holme
2014-12-14asyn-thread: We prefer 'CURLcode result'Steve Holme
2014-12-14smb: Fixed unnecessary initialisation of struct member variablesSteve Holme
There is no need to set the 'state' and 'result' member variables to SMB_REQUESTING (0) and CURLE_OK (0) after the allocation via calloc() as calloc() initialises the contents to zero.
2014-12-14ntlm: Fixed return code for bad type-2 Target InfoSteve Holme
Use CURLE_BAD_CONTENT_ENCODING for bad type-2 Target Info security buffers just like we do for bad decodes.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 18:01:38 +0000