aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2019-01-14cookie: fix comment typo (url_path_len -> uri_path_len)Frank Gevaerts
Closes #3469
2019-01-13extract_if_dead: use a known working transfer when checking connectionsDaniel Stenberg
Make sure that this function sets a proper "live" transfer for the connection before calling the protocol-specific connection check function, and then clear it again afterward as a non-used connection has no current transfer. Reported-by: Jeroen Ooms Reviewed-by: Marcel Raad Reviewed-by: Daniel Gustafsson Fixes #3463 Closes #3464
2019-01-13openssl: adapt to 3.0.0, OpenSSL_version_num() is deprecatedDaniel Stenberg
OpenSSL_version() replaces OpenSSL_version_num() Closes #3462
2019-01-11urldata: rename easy_conn to just connDaniel Stenberg
We use "conn" everywhere to be a pointer to the connection. Introduces two functions that "attaches" and "detaches" the connection to and from the transfer. Going forward, we should favour using "data->conn" (since a transfer always only has a single connection or none at all) to "conn->data" (since a connection can have none, one or many transfers associated with it and updating conn->data to be correct is error prone and a frequent reason for internal issues). Closes #3442
2019-01-10cookies: allow secure override when done over HTTPSDaniel Stenberg
Added test 1562 to verify. Reported-by: Jeroen Ooms Fixes #3445 Closes #3450
2019-01-10multi: multiplexing improvementsDaniel Stenberg
Fixes #3436 Closes #3448 Problem 1 After LOTS of scratching my head, I eventually realized that even when doing 10 uploads in parallel, sometimes the socket callback to the application that tells it what to wait for on the socket, looked like it would reflect the status of just the single transfer that just changed state. Digging into the code revealed that this was indeed the truth. When multiple transfers are using the same connection, the application did not correctly get the *combined* flags for all transfers which then could make it switch to READ (only) when in fact most transfers wanted to get told when the socket was WRITEABLE. Problem 1b A separate but related regression had also been introduced by me when I cleared connection/transfer association better a while ago, as now the logic couldn't find the connection and see if that was marked as used by more transfers and then it would also prematurely remove the socket from the socket hash table even in times other transfers were still using it! Fix 1 Make sure that each socket stored in the socket hash has a "combined" action field of what to ask the application to wait for, that is potentially the ORed action of multiple parallel transfers. And remove that socket hash entry only if there are no transfers left using it. Problem 2 The socket hash entry stored an association to a single transfer using that socket - and when curl_multi_socket_action() was called to tell libcurl about activities on that specific socket only that transfer was "handled". This was WRONG, as a single socket/connection can be used by numerous parallel transfers and not necessarily a single one. Fix 2 We now store a list of handles in the socket hashtable entry and when libcurl is told there's traffic for a particular socket, it now iterates over all known transfers using that single socket.
2019-01-09cookies: skip custom cookies when redirecting cross-siteKatsuhiko YOSHIDA
Closes #3417
2019-01-09timediff: fix math for unsigned time_tDaniel Stenberg
Bug: https://curl.haxx.se/mail/lib-2018-12/0088.html Closes #3449
2019-01-07curl_multi_remove_handle() don't block terminating c-ares requestsBrad Spencer
Added Curl_resolver_kill() for all three resolver modes, which only blocks when necessary, along with test 1592 to confirm curl_multi_remove_handle() doesn't block unless it must. Closes #3428 Fixes #3371
2019-01-07Revert "http_negotiate: do not close connection until negotiation is completed"Daniel Stenberg
This reverts commit 07ebaf837843124ee670e5b8c218b80b92e06e47. This also reopens PR #3275 which brought the change now reverted. Fixes #3384 Closes #3439
2019-01-06schannel: fix compiler warningMarcel Raad
When building with Unicode on MSVC, the compiler warns about freeing a pointer to const in Curl_unicodefree. Fix this by declaring it as non-const and casting the argument to Curl_convert_UTF8_to_tchar to non-const too, like we do in all other places. Closes https://github.com/curl/curl/pull/3435
2019-01-04printf: introduce CURL_FORMAT_TIMEDIFF_TRikard Falkeborn
2019-01-04printf: fix format specifiersRikard Falkeborn
Closes #3426
2019-01-01ntlm: update selection of type 3 responseMarkus Moeller
NTLM2 did not work i.e. no NTLMv2 response was created. Changing the check seems to work. Ref: https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-NLMP/[MS-NLMP].pdf Fixes https://github.com/curl/curl/issues/3286 Closes https://github.com/curl/curl/pull/3287 Closes https://github.com/curl/curl/pull/3415
2018-12-30urlapi: fix parsing ipv6 with zone indexDaniel Gustafsson
The previous fix for parsing IPv6 URLs with a zone index was a paddle short for URLs without an explicit port. This patch fixes that case and adds a unit test case. This bug was highlighted by issue #3408, and while it's not the full fix for the problem there it is an isolated bug that should be fixed regardless. Closes #3411 Reported-by: GitYuanQu on github Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-27hostip: support wildcard hostsClaes Jakobsson
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are try-last so any non-wildcard entry is resolved first. If specified, any host not matched by another CURLOPT_RESOLVE config will use this as fallback. Example send a.com to 10.0.0.1 and everything else to 10.0.0.2: curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \ https://a.com https://b.com This is probably quite similar to using: --connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443 Closes #3406 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-27url: fix incorrect indentationDaniel Gustafsson
2018-12-23Revert "libssh: no data pointer == nothing to do"Daniel Stenberg
This reverts commit c98ee5f67f497195c9 since commit f3ce38739fa fixed the problem in a more generic way.
2018-12-23disconnect: set conn->data for protocol disconnectDaniel Stenberg
Follow-up to fb445a1e18d: Set conn->data explicitly to point out the current transfer when invoking the protocol-specific disconnect function so that it can work correctly. Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=12173
2018-12-23timeval: Use high resolution timestamps on WindowsPavel P
- Use QueryPerformanceCounter on Windows Vista+ There is confusing info floating around that QueryPerformanceCounter can leap etc, which might have been true long time ago, but no longer the case nowadays (perhaps starting from WinXP?). Also, boost and std::chrono::steady_clock use QueryPerformanceCounter in a similar way. Prior to this change GetTickCount or GetTickCount64 was used, which has lower resolution. That is still the case for <= XP. Fixes https://github.com/curl/curl/issues/3309 Closes https://github.com/curl/curl/pull/3318
2018-12-22libssh: no data pointer == nothing to doDaniel Stenberg
2018-12-22conncache_unlock: avoid indirection by changing input argument typeDaniel Stenberg
2018-12-22disconnect: separate connections and easy handles betterDaniel Stenberg
Do not assume/store assocation between a given easy handle and the connection if it can be avoided. Long-term, the 'conn->data' pointer should probably be removed as it is a little too error-prone. Still used very widely though. Reported-by: masbug on github Fixes #3391 Closes #3400
2018-12-22libssh: free sftp_canonicalize_path() data correctlyDaniel Stenberg
Assisted-by: Harry Sintonen Fixes #3402 Closes #3403
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-21if2ip: remove unused function Curl_if_is_interface_nameDaniel Stenberg
Closes #3401
2018-12-20http2: clear pause stream id if it gets closedDaniel Stenberg
Reported-by: Florian Pritz Fixes #3392 Closes #3399
2018-12-20wolfssl: Perform cleanupDavid Garske
This adds a cleanup callback for cyassl. Resolves possible memory leak when using ECC fixed point cache. Closes #3395 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
2018-12-20mbedtls: follow-up VERIFYHOST fix from f097669248Daniel Stenberg
Fix-by: Eric Rosenquist Fixes #3376 Closes #3390
2018-12-19cookies: extend domain checks to non psl buildsDaniel Gustafsson
Ensure to perform the checks we have to enforce a sane domain in the cookie request. The check for non-PSL enabled builds is quite basic but it's better than nothing. Closes #2964 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-19smb: fix incorrect path in request if connection reusedMatus Uzak
Follow-up to 09e401e01bf9. If connection gets reused, then data member will be copied, but not the proto member. As a result, in smb_do(), path has been set from the original proto.share data. Closes #3388
2018-12-17mbedtls: use VERIFYHOSTDaniel Stenberg
Previously, VERIFYPEER would enable/disable all checks. Reported-by: Eric Rosenquist Fixes #3376 Closes #3380
2018-12-17pingpong: change default response timeout to 120 secondsDaniel Stenberg
Previously it was 30 minutes
2018-12-17pingpong: ignore regular timeout in disconnect phaseDaniel Stenberg
The timeout set with CURLOPT_TIMEOUT is no longer used when disconnecting from one of the pingpong protocols (FTP, IMAP, SMTP, POP3). Reported-by: jasal82 on github Fixes #3264 Closes #3374
2018-12-14http: Implement trailing headers for chunked transfersAyoub Boudhar
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION options that allow a callback based approach to sending trailing headers with chunked transfers. The test server (sws) was updated to take into account the detection of the end of transfer in the case of trailing headers presence. Test 1591 checks that trailing headers can be sent using libcurl. Closes #3350
2018-12-14darwinssl: accept setting max-tls with default min-tlsDaniel Stenberg
Reported-by: Andrei Neculau Fixes #3367 Closes #3373
2018-12-13gopher: fix memory leak from 9026083ddb2a9Daniel Stenberg
2018-12-13gopher: always include the entire gopher-path in requestLeonardo Taccari
After the migration to URL API all octets in the selector after the first `?' were interpreted as query and accidentally discarded and not passed to the server. Add a gopherpath to always concatenate possible path and query URL pieces. Fixes #3369 Closes #3370
2018-12-13urlapi: distinguish possibly empty queryLeonardo Taccari
If just a `?' to indicate the query is passed always store a zero length query instead of having a NULL query. This permits to distinguish URL with trailing `?'. Fixes #3369 Closes #3370
2018-12-13cookies: leave secure cookies aloneDaniel Gustafsson
Only allow secure origins to be able to write cookies with the 'secure' flag set. This reduces the risk of non-secure origins to influence the state of secure origins. This implements IETF Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates RFC6265. Closes #2956 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-12urlapi: Fix port parsing of eol colonDaniel Gustafsson
A URL with a single colon without a portnumber should use the default port, discarding the colon. Fix, add a testcase and also do little bit of comment wordsmithing. Closes #3365 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-12Curl_follow: extract the Location: header field unvalidatedDaniel Stenberg
... when not actually following the redirect. Otherwise we return error for this and an application can't extract the value. Test 1518 added to verify. Reported-by: Pavel Pavlov Fixes #3340 Closes #3364
2018-12-11multi: convert two timeout variables to timediff_tDaniel Stenberg
The time_t type is unsigned on some systems and these variables are used to hold return values from functions that return timediff_t already. timediff_t is always a signed type. Closes #3363
2018-12-11tests: add urlapi unittestDaniel Gustafsson
This adds a new unittest intended to cover the internal functions in the urlapi code, starting with parse_port(). In order to avoid name collisions in debug builds, parse_port() is renamed Curl_parse_port() since it will be exported. Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-12-11urlapi: fix portnumber parsing for ipv6 zone indexDaniel Gustafsson
An IPv6 URL which contains a zone index includes a '%%25<zode id>' string before the ending ']' bracket. The parsing logic wasn't set up to cope with the zone index however, resulting in a malformed url error being returned. Fix by breaking the parsing into two stages to correctly handle the zone index. Closes #3355 Closes #3319 Reported-by: tonystz on Github Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-12-11http: fix HTTP auth to include query in URIJay Satiro
- Include query in the path passed to generate HTTP auth. Recent changes to use the URL API internally (46e1640, 7.62.0) inadvertently broke authentication URIs by omitting the query. Fixes https://github.com/curl/curl/issues/3353 Closes #3356
2018-12-11http: don't set CURLINFO_CONDITION_UNMET for http status code 204Michael Kaufmann
The http status code 204 (No Content) should not change the "condition unmet" flag. Only the http status code 304 (Not Modified) should do this. Closes #359
2018-12-11ldap: fix LDAP URL parsing regressionsSamuel Surtees
- Match URL scheme with LDAP and LDAPS - Retrieve attributes, scope and filter from URL query instead Regression brought in 46e164069d1a5230 (7.62.0) Closes #3362
2018-12-10(lib)curl.rc: fixup for minor bugsStefan Kanthak
All resources defined in lib/libcurl.rc and curl.rc are language neutral. winbuild/MakefileBuild.vc ALWAYS defines the macro DEBUGBUILD, so the ifdef's in line 33 of lib/libcurl.rc and src/curl.rc are wrong. Replace the hard-coded constants in both *.rc files with #define'd values. Thumbs-uped-by: Rod Widdowson, Johannes Schindelin URL: https://curl.haxx.se/mail/lib-2018-11/0000.html Closes #3348
2018-12-09cookies: expire "Max-Age=0" immediatelyDaniel Stenberg
Reported-by: Jeroen Ooms Fixes #3351 Closes #3352
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 23:40:09 +0000