| Age | Commit message (Collapse) | Author |
|---|
|
Added USE_NTLM condition compilation around the NTLM functions called
from pop3_statemach_act() introduced in commit 69f7156ad96877.
|
|
Moved the cram-md5 message creation from smtp.c into the sasl module
to allow for use by other modules such as pop3.
|
|
Because pop3_endofresp() is called for each line of data yet is not
passed the line and line length, so we have to use the data pointed to
by pp->linestart_resp which contains the whole packet, the mechanisms
were being detected in one call yet the function would be called for
each line of data.
Using curl with verbose mode enabled would show that one line of data
would be received in response to the AUTH command, before the AUTH
<mechanism> command was sent to the server and then the next few lines
of the original AUTH command would be displayed before the response from
the AUTH <mechanism> command. This would then cause problems when
parsing the CRAM-MD5 challenge data as extra data was contained in the
buffer.
Changed the parsing so that each line is checked for the mechanisms
and the function returns FALSE until the whole of the AUTH response has
been processed.
|
|
Applied a fix to avoid warnings on systems where Curl_ntlm_sspi_cleanup()
is just a nop.
|
|
|
|
Previously it wasn't possible to connect to POP3 and not specify the
user name as a CURLE_ACCESS_DENIED error would be returned. This error
occurred because USER would be sent to the server with a blank user name
if no mailbox user was specified as the server would reply with -ERR.
This wasn't a problem prior to the 7.26.0 release but with the
introduction of custom commands the user and/or application developer
might want to issue a CAPA command without having to log in as a
specific mailbox user.
Additionally this fix won't send the newly introduced AUTH command if no
user name is specified.
|
|
Corrected lines exceeding 78 characters.
Repositioned some comments and added extra clarity.
|
|
|
|
|
|
|
|
Moved the ntlm message creation and decoding from smtp.c into the sasl
module to allow for use by other modules such as pop3.
|
|
|
|
Moved the login message creation from smtp.c into the sasl module
to allow for use by other modules such as pop3.
|
|
Rather than encoding the password message itself the
smtp_state_authpasswd_resp() function now delegates the work to the same
function that smtp_state_authlogin_resp() and smtp_authenticate() use
when constructing the encoded user name.
|
|
In preparation for moving to the SASL module re-factored the
smtp_auth_login_user() function to smtp_auth_login() so that it can be
used for both user names and passwords as sending both of these under
the login authentication mechanism is the same.
|
|
|
|
|
|
Moved the plain text message creation from smtp.c into the sasl module
to allow for use by other modules such as pop3.
|
|
|
|
The POP3 protocol doesn't really have the concept of error codes and
uses +, +OK and -ERR in response to commands to indicate continue,
success and error.
The AUTH command is one of those commands that requires multiple pieces
of data to be sent to the server where the server will respond with + as
part of the handshaking. This meant changing the values before
continuing with the next stage of adding authentication support.
|
|
Changed the order of the state machine to match the order of actual
events.
Reworked some comments and function parameter positioning that I missed
the other day.
|
|
Bug: http://lists.baseurl.org/pipermail/yum-devel/2012-January/009002.html
|
|
|
|
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
|
|
|
|
Moved EOB definition into header file.
Switched the logic around in pop3_endofresp() to allow for the
introduction of auth-mechanism detection.
Repositioned second and third function variables where they will fit
within the 78 character line limit.
Tidied up some comments.
|
|
|
|
|
|
Move the SMTP_AUTH constants into a separate header file in
preparation for adding SASL based authentication to POP3 as the two
protocols will need to share them.
|
|
|
|
Due to the result code being reset to CURLE_OK when smtp_dophase_done()
was called, postdata would incorrectly be sent to the server when the
MAIL FROM or RCPT command was rejected.
As such, libcurl would return the wrong result code from performing the
operation and additionally set CURLINFO_RESPONSE_CODE to be that
returned by the postdata command.
Bug: http://curl.haxx.se/mail/lib-2012-05/0108.html
Reported by: Gokhan Sengun
|
|
In nettle/md5.h, md5_init and md5_update are defined as macros to
nettle_md5_init and nettle_md5_update respectively. This causes
error when using MD5_params.md5_init and md5_update. This patch
renames these members as md5_init_func and md5_update_func to
avoid name conflict. For completeness, MD5_params.md5_final was
also renamed as md5_final_func.
The changes in curl_ntlm_core.c is conversion error and fixed by
casting to proper type.
|
|
|
|
A dot character at the beginning of a line would not be escaped to a
double dot as required by RFC-2821, instead it would be deleted by the
mail server. Please see section 4.5.2 of the RFC for more information.
Note: This fix also simplifies the detection of repeated CRLF.CRLF
combinations, such as CRLF.CRLF.CRLF, a little rather than having to
advance the eob counter to 2.
|
|
check whether md5 initialization succeeded before updating digest of
buffers onto it
|
|
|
|
Roman Mamedov spotted (in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126) that curl would
not complain when given a URL with an IPv6 numerical address without
brackets. It would simply cut off the last ":[hex]" part and thus not
work correctly.
That's a URL using an illegal syntax and now libcurl will instead return
a clear error code and error message detailing the error.
The above mentioned bug report claims this to be a regression but
libcurl does not guarantee functionality when given URLs that aren't
following the URL spec (RFC3986 mostly). I consider the fact that it
used to handle this differently a mere coincidence.
|
|
Bug: http://curl.haxx.se/mail/lib-2012-04/0246.html
Reported by: Michael Mueller
|
|
curl needs to be more chatty regarding certificate verification failure
during SSL handshake
|
|
This reverts commit 2976de480808119dae08fc6f52c8d75ba1aedb1a.
|
|
This reverts commit 46cd5f1daddad3b3e542e6d93eee52e8bb9a8687.
|
|
This reverts commit 77172a242fc0c820f97eae39d0e3e0f265222fe6.
|
|
This reverts commit 683bfa60ad0b52505947e59b03515e5f44378523.
|
|
This reverts commit 412510f97407d617426d93b80e6b6bf0a8ff11ac.
|
|
|
|
|
|
|
|
|
|
Added version information for Windows SSPI to curl's main version
string and removed SSPI from the features string.
|
|
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
|
