aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2019-02-11dns: release sharelock as soon as possibleDaniel Gustafsson
There is no benefit to holding the data sharelock when freeing the addrinfo in case it fails, so ensure releaseing it as soon as we can rather than holding on to it. This also aligns the code with other consumers of sharelocks. Closes #3516 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-02-11multi: (void)-prefix when ignoring return valuesDaniel Stenberg
... and added braces to two function calls which fixes warnings if they are replace by empty macros at build-time.
2019-02-11connection_check: set ->data to the transfer doing the checkDaniel Stenberg
The http2 code for connection checking needs a transfer to use. Make sure a working one is set before handler->connection_check() is called. Reported-by: jnbr on github Fixes #3541 Closes #3547
2019-02-11hostip: make create_hostcache_id avoid alloc + freeDaniel Stenberg
Closes #3544
2019-02-10cleanup: make local functions staticDaniel Stenberg
urlapi: turn three local-only functions into statics conncache: make conncache_find_first_connection static multi: make detach_connnection static connect: make getaddressinfo static curl_ntlm_core: make hmac_md5 static http2: make two functions static http: make http_setup_conn static connect: make tcpnodelay static tests: make UNITTEST a thing to mark functions with, so they can be static for normal builds and non-static for unit test builds ... and mark Curl_shuffle_addr accordingly. url: make up_free static setopt: make vsetopt static curl_endian: make write32_le static rtsp: make rtsp_connisdead static warnless: remove unused functions memdebug: remove one unused function, made another static
2019-02-09url/idnconvert: remove scan for <= 32 ascii valuesDaniel Stenberg
The check was added back in fa939220df before the URL parser would catch these problems and therefore these will never trigger now. Closes #3539
2019-02-09urlapi: reduce variable scope, remove unreachable 'break'Daniel Stenberg
Both nits pointed out by codacy.com Closes #3540
2019-02-06url: close TLS before removing conn from cacheChris Araman
- Fix potential crashes in schannel shutdown. Ensure any TLS shutdown messages are sent before removing the association between the connection and the easy handle. Reverts @bagder's previous partial fix for #3412. Fixes https://github.com/curl/curl/issues/3412 Fixes https://github.com/curl/curl/issues/3505 Closes https://github.com/curl/curl/pull/3531
2019-02-04smtp: avoid risk of buffer overflow in strtolDaniel Gustafsson
If the incoming len 5, but the buffer does not have a termination after 5 bytes, the strtol() call may keep reading through the line buffer until is exceeds its boundary. Fix by ensuring that we are using a bounded read with a temporary buffer on the stack. Bug: https://curl.haxx.se/docs/CVE-2019-3823.html Reported-by: Brian Carpenter (Geeknik Labs) CVE-2019-3823
2019-02-04ntlm: fix *_type3_message size check to avoid buffer overflowDaniel Stenberg
Bug: https://curl.haxx.se/docs/CVE-2019-3822.html Reported-by: Wenxiang Qian CVE-2019-3822
2019-02-04NTLM: fix size check condition for type2 received dataDaniel Stenberg
Bug: https://curl.haxx.se/docs/CVE-2018-16890.html Reported-by: Wenxiang Qian CVE-2018-16890
2019-02-01spnego_sspi: add support for channel bindinggeorgeok
Attempt to add support for Secure Channel binding when negotiate authentication is used. The problem to solve is that by default IIS accepts channel binding and curl doesn't utilise them. The result was a 401 response. Scope affects only the Schannel(winssl)-SSPI combination. Fixes https://github.com/curl/curl/issues/3503 Closes https://github.com/curl/curl/pull/3509
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
2019-02-01multi: set the EXPIRE_*TIMEOUT timers at TIMER_STARTSINGLE timeDaniel Stenberg
To make sure Curl_timeleft() also thinks the timeout has been reached when one of the EXPIRE_*TIMEOUTs expires. Bug: https://curl.haxx.se/mail/lib-2019-01/0073.html Reported-by: Zhao Yisha Closes #3501
2019-01-28sigpipe: if mbedTLS is used, ignore SIGPIPEJeremie Rapin
mbedTLS doesn't have a sigpipe management. If a write/read occurs when the remote closes the socket, the signal is raised and kills the application. Use the curl mecanisms fix this behavior. Signed-off-by: Jeremie Rapin <j.rapin@overkiz.com> Closes #3502
2019-01-28timeval: Disable MSVC Analyzer GetTickCount warningMichael Kujawa
Compiling with msvc /analyze and a recent Windows SDK warns against using GetTickCount (Suggests to use GetTickCount64 instead.) Since GetTickCount is only being used when GetTickCount64 isn't available, I am disabling that warning. Fixes https://github.com/curl/curl/issues/3437 Closes https://github.com/curl/curl/pull/3440
2019-01-26configure: rewrite --enable-code-coverageDaniel Stenberg
The previously used ax_code_coverage.m4 is not license compatible and must not be used. Reported-by: William A. Rowe Jr Fixes #3497 Closes #3499
2019-01-24setopt: enable CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION for libsshFelix Hädicke
CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION are supported for libssh as well. So accepting these options only when compiling with libssh2 is wrong here. Fixes #3493 Closes #3494
2019-01-24libssh: do not let libssh create socketFelix Hädicke
By default, libssh creates a new socket, instead of using the socket created by curl for SSH connections. Pass the socket created by curl to libssh using ssh_options_set() with SSH_OPTIONS_FD directly after ssh_new(). So libssh uses our socket instead of creating a new one. This approach is very similar to what is done in the libssh2 code, where the socket created by curl is passed to libssh2 when libssh2_session_startup() is called. Fixes #3491 Closes #3495
2019-01-21schannel: preserve original certificate path parameterArchangel_SDY
Fixes #3480 Closes #3487
2019-01-20memcmp: avoid doing single char memcmpDaniel Gustafsson
There is no real gain in performing memcmp() comparisons on single characters, so change these to array subscript inspections which saves a call and makes the code clearer. Closes #3486 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
2019-01-19ntlm_sspi: add support for channel bindinggeorgeok
Windows extended potection (aka ssl channel binding) is required to login to ntlm IIS endpoint, otherwise the server returns 401 responses. Fixes #3280 Closes #3321
2019-01-18schannel: on connection close there might not be a transferDaniel Stenberg
Reported-by: Marcel Raad Fixes #3412 Closes #3483
2019-01-17ssh: log the libssh2 error message when ssh session startup failsJDepooter
When a ssh session startup fails, it is useful to know why it has failed. This commit changes the message from: "Failure establishing ssh session" to something like this, for example: "Failure establishing ssh session: -5, Unable to exchange encryption keys" Closes #3481
2019-01-16openssl: fix the SSL_get_tlsext_status_ocsp_resp callDaniel Stenberg
.... to not pass in a const in the second argument as that's not how it is supposed to be used and might cause compiler warnings. Reported-by: Pavel Pavlov Fixes #3477 Closes #3478
2019-01-15extract_if_dead: follow-up to 54b201b48c90aDaniel Stenberg
extract_if_dead() dead is called from two functions, and only one of them should get conn->data updated and now neither call path clears it. scan-build found a case where conn->data would be NULL dereferenced in ConnectionExists() otherwise. Closes #3473
2019-01-15multi: remove "Dead assignment"Daniel Stenberg
Found by scan-build. Follow-up to 4c35574bb785ce. Closes #3471
2019-01-15tests: move objnames-* from lib into testsDaniel Stenberg
Since they're used purely for testing purposes, I think they should rather be stored there. Closes #3470
2019-01-14cookie: fix comment typo (url_path_len -> uri_path_len)Frank Gevaerts
Closes #3469
2019-01-13extract_if_dead: use a known working transfer when checking connectionsDaniel Stenberg
Make sure that this function sets a proper "live" transfer for the connection before calling the protocol-specific connection check function, and then clear it again afterward as a non-used connection has no current transfer. Reported-by: Jeroen Ooms Reviewed-by: Marcel Raad Reviewed-by: Daniel Gustafsson Fixes #3463 Closes #3464
2019-01-13openssl: adapt to 3.0.0, OpenSSL_version_num() is deprecatedDaniel Stenberg
OpenSSL_version() replaces OpenSSL_version_num() Closes #3462
2019-01-11urldata: rename easy_conn to just connDaniel Stenberg
We use "conn" everywhere to be a pointer to the connection. Introduces two functions that "attaches" and "detaches" the connection to and from the transfer. Going forward, we should favour using "data->conn" (since a transfer always only has a single connection or none at all) to "conn->data" (since a connection can have none, one or many transfers associated with it and updating conn->data to be correct is error prone and a frequent reason for internal issues). Closes #3442
2019-01-10cookies: allow secure override when done over HTTPSDaniel Stenberg
Added test 1562 to verify. Reported-by: Jeroen Ooms Fixes #3445 Closes #3450
2019-01-10multi: multiplexing improvementsDaniel Stenberg
Fixes #3436 Closes #3448 Problem 1 After LOTS of scratching my head, I eventually realized that even when doing 10 uploads in parallel, sometimes the socket callback to the application that tells it what to wait for on the socket, looked like it would reflect the status of just the single transfer that just changed state. Digging into the code revealed that this was indeed the truth. When multiple transfers are using the same connection, the application did not correctly get the *combined* flags for all transfers which then could make it switch to READ (only) when in fact most transfers wanted to get told when the socket was WRITEABLE. Problem 1b A separate but related regression had also been introduced by me when I cleared connection/transfer association better a while ago, as now the logic couldn't find the connection and see if that was marked as used by more transfers and then it would also prematurely remove the socket from the socket hash table even in times other transfers were still using it! Fix 1 Make sure that each socket stored in the socket hash has a "combined" action field of what to ask the application to wait for, that is potentially the ORed action of multiple parallel transfers. And remove that socket hash entry only if there are no transfers left using it. Problem 2 The socket hash entry stored an association to a single transfer using that socket - and when curl_multi_socket_action() was called to tell libcurl about activities on that specific socket only that transfer was "handled". This was WRONG, as a single socket/connection can be used by numerous parallel transfers and not necessarily a single one. Fix 2 We now store a list of handles in the socket hashtable entry and when libcurl is told there's traffic for a particular socket, it now iterates over all known transfers using that single socket.
2019-01-09cookies: skip custom cookies when redirecting cross-siteKatsuhiko YOSHIDA
Closes #3417
2019-01-09timediff: fix math for unsigned time_tDaniel Stenberg
Bug: https://curl.haxx.se/mail/lib-2018-12/0088.html Closes #3449
2019-01-07curl_multi_remove_handle() don't block terminating c-ares requestsBrad Spencer
Added Curl_resolver_kill() for all three resolver modes, which only blocks when necessary, along with test 1592 to confirm curl_multi_remove_handle() doesn't block unless it must. Closes #3428 Fixes #3371
2019-01-07Revert "http_negotiate: do not close connection until negotiation is completed"Daniel Stenberg
This reverts commit 07ebaf837843124ee670e5b8c218b80b92e06e47. This also reopens PR #3275 which brought the change now reverted. Fixes #3384 Closes #3439
2019-01-06schannel: fix compiler warningMarcel Raad
When building with Unicode on MSVC, the compiler warns about freeing a pointer to const in Curl_unicodefree. Fix this by declaring it as non-const and casting the argument to Curl_convert_UTF8_to_tchar to non-const too, like we do in all other places. Closes https://github.com/curl/curl/pull/3435
2019-01-04printf: introduce CURL_FORMAT_TIMEDIFF_TRikard Falkeborn
2019-01-04printf: fix format specifiersRikard Falkeborn
Closes #3426
2019-01-01ntlm: update selection of type 3 responseMarkus Moeller
NTLM2 did not work i.e. no NTLMv2 response was created. Changing the check seems to work. Ref: https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-NLMP/[MS-NLMP].pdf Fixes https://github.com/curl/curl/issues/3286 Closes https://github.com/curl/curl/pull/3287 Closes https://github.com/curl/curl/pull/3415
2018-12-30urlapi: fix parsing ipv6 with zone indexDaniel Gustafsson
The previous fix for parsing IPv6 URLs with a zone index was a paddle short for URLs without an explicit port. This patch fixes that case and adds a unit test case. This bug was highlighted by issue #3408, and while it's not the full fix for the problem there it is an isolated bug that should be fixed regardless. Closes #3411 Reported-by: GitYuanQu on github Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-27hostip: support wildcard hostsClaes Jakobsson
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are try-last so any non-wildcard entry is resolved first. If specified, any host not matched by another CURLOPT_RESOLVE config will use this as fallback. Example send a.com to 10.0.0.1 and everything else to 10.0.0.2: curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \ https://a.com https://b.com This is probably quite similar to using: --connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443 Closes #3406 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-27url: fix incorrect indentationDaniel Gustafsson
2018-12-23Revert "libssh: no data pointer == nothing to do"Daniel Stenberg
This reverts commit c98ee5f67f497195c9 since commit f3ce38739fa fixed the problem in a more generic way.
2018-12-23disconnect: set conn->data for protocol disconnectDaniel Stenberg
Follow-up to fb445a1e18d: Set conn->data explicitly to point out the current transfer when invoking the protocol-specific disconnect function so that it can work correctly. Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=12173
2018-12-23timeval: Use high resolution timestamps on WindowsPavel P
- Use QueryPerformanceCounter on Windows Vista+ There is confusing info floating around that QueryPerformanceCounter can leap etc, which might have been true long time ago, but no longer the case nowadays (perhaps starting from WinXP?). Also, boost and std::chrono::steady_clock use QueryPerformanceCounter in a similar way. Prior to this change GetTickCount or GetTickCount64 was used, which has lower resolution. That is still the case for <= XP. Fixes https://github.com/curl/curl/issues/3309 Closes https://github.com/curl/curl/pull/3318
2018-12-22libssh: no data pointer == nothing to doDaniel Stenberg
2018-12-22conncache_unlock: avoid indirection by changing input argument typeDaniel Stenberg
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:45:27 +0000