aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2012-06-10Curl_pgrsDone: return int and acknowledge return codeDaniel Stenberg
Since Curl_pgrsDone() itself calls Curl_pgrsUpdate() which may return an abort instruction or similar we need to return that info back and subsequently properly handle return codes from Curl_pgrsDone() where used. (Spotted by a Coverity scan)
2012-06-09smtp.c: Removed unused variableSteve Holme
2012-06-09smtp: Post apop feature code tidy upSteve Holme
2012-06-09pop3: Post apop feature code tidy upSteve Holme
2012-06-09pop3: Added support for apop authenticationSteve Holme
2012-06-09pop3: Enhanced the extended authentication mechanism detectionSteve Holme
Enhanced the authentication type / mechanism detection in preparation for the introduction of APOP support.
2012-06-09pop3.c: Fixed length of SASL checkSteve Holme
2012-06-09OpenSSL: support longer certificate subject namesDaniel Stenberg
Previously it would use a 256 byte buffer and thus cut off very long subject names. The limit is now upped to the receive buffer size, 16K. Bug: http://curl.haxx.se/bug/view.cgi?id=3533045 Reported by: Anthony G. Basile
2012-06-08ssl: fix duplicated SSL handshake with multi interface and proxyKamil Dudka
Bug: https://bugzilla.redhat.com/788526 Reported by: Enrico Scholz
2012-06-08openldap: OOM fixesDaniel Stenberg
when calloc fails, return error! (Detected by Fortify) Reported by: Robert B. Harris
2012-06-08sasl: Re-factored mechanism constants in preparation for APOP workSteve Holme
2012-06-07smtp.c: Re-factored the smtp_state_*_resp() functionsSteve Holme
Re-factored the smtp_state_*_resp() functions to 1) Match the constants that were refactored in commit 00fddba6727c, 2) To be more readable and 3) To match their counterparties in pop3.c.
2012-06-06smtp: Re-factored the SMTP_AUTH* state machine constantsSteve Holme
Re-factored the SMTP_AUTH* constants, that are used by the state machine, to be clearer to read.
2012-06-05smtp.c: Removed whitespaceSteve Holme
2012-06-05pop3: Another small code tidy upSteve Holme
Missed some comments that we identified during the SMTP tidy up earlier.
2012-06-05smtp: Post authentication code tidy upSteve Holme
Corrected lines longer than 78 characters. Removed unnecessary braces in smtp_state_helo_resp(). Introduced some comments in data sending functions. Tidied up comments to match changes made in pop3.c.
2012-06-05email: Removed duplicated header fileSteve Holme
2012-06-04sasl: Renamed Curl_sasl_decode_ntlm_type2_message()Steve Holme
For consistency with other SASL based functions renamed this function to Curl_sasl_create_ntlm_type3_message() which better describes its usage.
2012-06-04pop3: Post authentication code tidy upSteve Holme
Corrected lines longer than 78 characters. Changed POP3_AUTH_FINAL to POP3_AUTH to match SMTP code now that the AUTH command is no longer sent on its own. Introduced some comments in data sending functions. Another attempt at trying to rational code and comment style.
2012-06-04pop3: Added support for sasl digest-md5 authenticationSteve Holme
2012-06-04sasl: add reference for curl_saslYang Tse
2012-06-04Makefile.inc: tab adjustmentYang Tse
2012-06-04sasl: Added service parameter to Curl_sasl_create_digest_md5_message()Steve Holme
Added a service type parameter to Curl_sasl_create_digest_md5_message() to allow the function to be used by different services rather than being hard coded to "smtp".
2012-06-04pop3: Changed the sasl mechanism detection from auth to capaSteve Holme
Not all SASL enabled POP3 servers support the AUTH command on its own when trying to detect the supported mechanisms. As such changed the mechanism detection to use the CAPA command instead.
2012-06-04sasl: Small code tidy upSteve Holme
Reworked variable names in Curl_sasl_create_cram_md5_message() to match those in Curl_sasl_create_digest_md5_message() as they are more appropriate.
2012-06-04sasl: Moved digest-md5 authentication message creation from smtp.cSteve Holme
Moved the digest-md5 message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-04sasl: Small code tidy up before moving digest-md5 overSteve Holme
Correction of comments and variable names.
2012-06-03pop3: Added support for sasl cram-md5 authenticationSteve Holme
2012-06-03Curl_sasl_create_plain_message: remove TABDaniel Stenberg
2012-06-03sasl: Small code tidy upSteve Holme
Added some comments and removed an unreferenced variable.
2012-06-03pop3.c: Added conditional compilation for NTLM function callsSteve Holme
Added USE_NTLM condition compilation around the NTLM functions called from pop3_statemach_act() introduced in commit 69f7156ad96877.
2012-06-03sasl: Moved cram-md5 authentication message creation from smtp.cSteve Holme
Moved the cram-md5 message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-03pop3: Fixed an issue with changes introduced in commit c267c53017bcSteve Holme
Because pop3_endofresp() is called for each line of data yet is not passed the line and line length, so we have to use the data pointed to by pp->linestart_resp which contains the whole packet, the mechanisms were being detected in one call yet the function would be called for each line of data. Using curl with verbose mode enabled would show that one line of data would be received in response to the AUTH command, before the AUTH <mechanism> command was sent to the server and then the next few lines of the original AUTH command would be displayed before the response from the AUTH <mechanism> command. This would then cause problems when parsing the CRAM-MD5 challenge data as extra data was contained in the buffer. Changed the parsing so that each line is checked for the mechanisms and the function returns FALSE until the whole of the AUTH response has been processed.
2012-06-03sasl.c: Fix to avoid warnings introduced in commit d9ca9e9869e8Steve Holme
Applied a fix to avoid warnings on systems where Curl_ntlm_sspi_cleanup() is just a nop.
2012-06-02pop3.c:Corrected typo in commit 69ba0da8272dSteve Holme
2012-06-02pop3: Fixed the issue of having to supply the user name for all requestsSteve Holme
Previously it wasn't possible to connect to POP3 and not specify the user name as a CURLE_ACCESS_DENIED error would be returned. This error occurred because USER would be sent to the server with a blank user name if no mailbox user was specified as the server would reply with -ERR. This wasn't a problem prior to the 7.26.0 release but with the introduction of custom commands the user and/or application developer might want to issue a CAPA command without having to log in as a specific mailbox user. Additionally this fix won't send the newly introduced AUTH command if no user name is specified.
2012-06-02pop3.c: Small code tidy upSteve Holme
Corrected lines exceeding 78 characters. Repositioned some comments and added extra clarity.
2012-06-02sasl: Corrected variable names in comments and parametersSteve Holme
2012-06-02pop3: Added support for sasl ntlm authenticationSteve Holme
2012-06-02sasl: Small comment style tidy up following ntlm commitSteve Holme
2012-06-02sasl: Moved ntlm authentication message handling from smtp.cSteve Holme
Moved the ntlm message creation and decoding from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-01pop3: Added support for sasl login authenticationSteve Holme
2012-05-31sasl: Moved login authentication message creation from smtp.cSteve Holme
Moved the login message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-31smtp.c: Reworked message encoding in smtp_state_authpasswd_resp()Steve Holme
Rather than encoding the password message itself the smtp_state_authpasswd_resp() function now delegates the work to the same function that smtp_state_authlogin_resp() and smtp_authenticate() use when constructing the encoded user name.
2012-05-31smtp.c: Re-factored smtp_auth_login_user() for use with passwordsSteve Holme
In preparation for moving to the SASL module re-factored the smtp_auth_login_user() function to smtp_auth_login() so that it can be used for both user names and passwords as sending both of these under the login authentication mechanism is the same.
2012-05-31pop3: Added support for sasl plain text authenticationSteve Holme
2012-05-30curl_ntlm_msgs.c: Corrected small spelling mistake in commentsSteve Holme
2012-05-30sasl: Moved plain text authentication message creation from smtp.cSteve Holme
Moved the plain text message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-28pop3: Introduced the continue response in pop3_endofresp()Steve Holme
2012-05-28pop3: Changed response code from O and E to + and -Steve Holme
The POP3 protocol doesn't really have the concept of error codes and uses +, +OK and -ERR in response to commands to indicate continue, success and error. The AUTH command is one of those commands that requires multiple pieces of data to be sent to the server where the server will respond with + as part of the handshaking. This meant changing the values before continuing with the next stage of adding authentication support.