Age | Commit message (Collapse) | Author |
|
Reported-by: ovidiu-benea@users.noreply.github.com
Closes #1675
Closes #1683
|
|
... to silence warning.
|
|
... causing a SIGSEGV in showit() in case the handle used to initiate
the connection has already been freed.
This commit fixes a bug introduced in curl-7_19_5-204-g5f0cae803.
Reported-by: Rob Sanders
Bug: https://bugzilla.redhat.com/1436158
|
|
No changes in behavior intended by this commit.
|
|
- s/SessionHandle/Curl_easy/
Bug: https://github.com/curl/curl/commit/eb16305#commitcomment-23035670
Reported-by: Gisle Vanem
|
|
It's defined for all build systems in curl_setup.h since commit
beb08481d01a07a8b10938b1078a5e298b1c2912. This caused macro
redefinition warnings in the configure builds.
Closes https://github.com/curl/curl/pull/1677
|
|
Make sure to always define WIN32_LEAN_AND_MEAN before including any
Windows headers to avoid pulling in unnecessary headers. This avoids
unnecessary macro clashes and compiler warnings.
Ref: https://github.com/curl/curl/issues/1562
Closes https://github.com/curl/curl/pull/1672
|
|
This is a follow-up to af02162 which removed (SET_)ERRNO macros. That
commit was an earlier draft that I committed by mistake, which was then
remedied by a5834e5 and e909de6, and now this commit. With this commit
there is now no difference between the current code and the changes that
were approved in the final draft.
Thanks-to: Max Dymond, Marcel Raad, Daniel Stenberg, Gisle Vanem
Ref: https://github.com/curl/curl/pull/1589
|
|
|
|
ldap_bind_s is marked as deprecated in w32api's winldap.h shipping with
the latest original MinGW, resulting in compiler warnings since commit
f0fe66f13c93d3d0af45d9fb1231c9164e0f9dc8. Fix this for the non-SSPI
case by using ldap_simple_bind_s again instead of ldap_bind_s with
LDAP_AUTH_SIMPLE.
Closes https://github.com/curl/curl/pull/1664
|
|
Prior to this change (SET_)ERRNO mapped to GetLastError/SetLastError
for Win32 and regular errno otherwise.
I reviewed the code and found no justifiable reason for conflating errno
on WIN32 with GetLastError/SetLastError. All Win32 CRTs support errno,
and any Win32 multithreaded CRT supports thread-local errno.
Fixes https://github.com/curl/curl/issues/895
Closes https://github.com/curl/curl/pull/1589
|
|
GCC 4.6.3 on travis complains:
smb.c: In function ‘get_posix_time’:
smb.c:725:13: error: declaration of ‘time’ shadows a global declaration
[-Werror=shadow]
Fix this by renaming the variable.
|
|
Removes BUILD_RELEASE_DEBUG_DIRS since it wasn't used anywhere.
Closes #1649
|
|
Bug: https://github.com/curl/curl/issues/828#issuecomment-313475151
|
|
|
|
Make the name reflect its use better, and add a short comment describing
what it's for.
|
|
... by checking the POLLIN define, as the header file checks don't work
on Windows.
|
|
inet_pton() exists on Windows and gets used by our cmake builds. Make
sure the correct header file is included to avoid compiler warnings.
Closes #1639
|
|
Bug: https://curl.haxx.se/mail/lib-2017-07/0005.html
Closes #1643
|
|
bug: https://curl.haxx.se/mail/lib-2017-07/0005.html
|
|
fork, getprotobyname, inet_addr, perror, uname
closes #1638
|
|
On a 64 bit host, sparse says:
timeval.c:148:15: warning: constant 0x7fffffffffffffff is so big it is long
timeval.c:149:12: warning: constant 0x7fffffffffffffff is so big it is long
so let's use long long constant types in order to prevent undesired overflow
failures.
Bug: https://curl.haxx.se/mail/lib-2017-07/0003.html
Closes #1636
Signed-off-by: Martin Kepplinger <martink@posteo.de>
|
|
... since CURLOPT_URL should follow the same rules as other options:
they remain set until changed or cleared.
Added test 1551 to verify.
Fixes #1631
Closes #1632
Reported-by: Pavel Rochnyak
|
|
- Change gnutls pointer/int macros to pointer/curl_socket_t.
Prior to this change they used long type as well.
The size of the `long` data type can be shorter than that of pointer
types. This is the case most notably on Windows.
If C99 were acceptable, we could simply use `intptr_t` here. But we
want to retain C89 compatibility.
Simply use the trick of performing pointer arithmetic with the NULL
pointer: to convert an integer `i` to a pointer, simply take the
address of the `i`th element of a hypothetical character array
starting at address NULL. To convert back, simply cast the pointer
difference.
Thanks to Jay Satiro for the initial modification to use curl_socket_t
instead of int/long.
Closes #1617
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Add a connection check function to HTTP2 based off RTSP. This causes
PINGs to be handled the next time the connection is reused.
Closes #1521
|
|
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
|
|
Fixes #1620
|
|
Prevent `Curl_pgrsTime` from modifying `t_starttransfer` when invoked
with `TIMER_STARTTRANSFER` more than once during a single request.
When a redirect occurs, this is considered a new request and
`t_starttransfer` can be updated to reflect the `t_starttransfer` time
of the redirect request.
Closes #1616
Bug: https://github.com/curl/curl/pull/1602#issuecomment-310267370
|
|
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
|
|
|
|
... to make it obvious what the data is used for
|
|
follow-up to 64ed44a815e4e to fix test 500 failures
|
|
|
|
... and CURLOPT_REQUEST_TARGET instead of CURLOPT_STRIP_PATH_SLASH.
This option instead provides the full "alternative" target to use in the
request, instead of extracting the path from the URL.
Test 1298 and 1299 updated accordingly.
Idea-by: Evert Pot
Suggestion: https://daniel.haxx.se/blog/2017/06/19/options-with-curl/comment-page-1/#comment-18373
Closes #1593
|
|
Bug: https://github.com/curl/curl/commit/73a2fcea0b4adea6ba342cd7ed1149782c214ae3#commitcomment-22655993
|
|
remote_scope_id is only used when both HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID
and ENABLE_IPV6 are defined instead of only one of them.
|
|
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes #1280
Closes #1462
|
|
This change introduces new alternatives for the existing six
curl_easy_getinfo() options that return sizes or speeds as doubles. The
new versions are named like the old ones but with an appended '_T':
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T
CURLINFO_CONTENT_LENGTH_UPLOAD_T
CURLINFO_SIZE_DOWNLOAD_T
CURLINFO_SIZE_UPLOAD_T
CURLINFO_SPEED_DOWNLOAD_T
CURLINFO_SPEED_UPLOAD_T
Closes #1511
|
|
The list was freed incorrectly since the llist refactor of
cbae73e1dd959. Added test 1550 to verify that it works and avoid future
regressions.
Reported-by: Pascal Terjan
Fixes #1584
Closes #1585
|
|
torture mode with test 1021 found it
|
|
After deff7de0eb0e22d2d142b96b9cc84cd8db5d2a48, the build without
CURL_DISABLE_PROXY and CURL_DISABLE_HTTP was failing because of missing
includes.
|
|
With CURL_DISABLE_PROXY or CURL_DISABLE_HTTP, GCC complained about a
missing prototype for Curl_connect_free.
|
|
The configure-based build also has this in addition to -Wall.
Closes https://github.com/curl/curl/pull/1578
|
|
Regression since 5113ad0424.
... and remove 'flaky' from test 1061 again
Closes #1579
|
|
... the previous code would reset the header length wrongly (since
5113ad0424). This makes test 1060 reliable again.
Also: make sws send even smaller chunks of data to increase the
likeliness of this happening.
|
|
Bug: https://github.com/curl/curl/issues/1254
Closes #1546
|
|
- Move the logic to detect a Windows drive letter prefix
(eg c: in c:foo) into a function-like macro.
Closes https://github.com/curl/curl/pull/1571
|
|
- No longer allow partial downloads of certdata.
Prior to this change partial downloads were (erroneously?) allowed since
only the server code was checked to be 200.
Bug: https://github.com/curl/curl/pull/1577
Reported-by: Matteo B.
|
|
Reported-by: Dan Fandrich
|
|
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes #1505
|