| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2010-01-11 | ssh_statemach_act() is now modified to loop over the switch() to perform as | Daniel Stenberg | |
| much as possible in one go, as long as it doesn't block and hasn't reached the end of the state machine. This avoids spurious -1 returns from curl_multi_fdset() simply because previously it would return from this function without anything in EWOUDLBLOCK and thus basically it wasn't actually waiting for anything!! | |||
| 2010-01-11 | After the TCP connect is confirmed in CURLM_STATE_WAITCONNECT and it changes | Daniel Stenberg | |
| state, we return CURLM_CALL_MULTI_PERFORM unconditionally then so that we can act faster like in the case the protocol-specific connect doesn't block on anything and we can just persue on the next action immediately. It also then avoids a case where curl_multi_fdset() would return -1. | |||
| 2010-01-11 | - Made sure that the progress callback is repeatedly called at a regular | Daniel Stenberg | |
| interval even during very slow connects. | |||
| 2010-01-09 | struct Curl_sh_entry's 'inuse' member was no longer used and is now removed | Daniel Stenberg | |
| 2010-01-08 | - Johan van Selst found and fixed a OpenSSL session ref count leak: | Daniel Stenberg | |
| ossl_connect_step3() increments an SSL session handle reference counter on each call. When sessions are re-used this reference counter may be incremented many times, but it will be decremented only once when done (by Curl_ossl_session_free()); and the internal OpenSSL data will not be freed if this reference count remains positive. When a session is re-used the reference counter should be corrected by explicitly calling SSL_SESSION_free() after each consecutive SSL_get1_session() to avoid introducing a memory leak. (http://curl.haxx.se/bug/view.cgi?id=2926284) | |||
| 2010-01-07 | removed a parameter from the Curl_http_readwrite_headers() prototype to remove | Daniel Stenberg | |
| the need for the struct forward declaration from http.h which caused problems with gcc 2.96 and quite frankly the parameter wasn't necessary anyway | |||
| 2010-01-07 | removed Curl_http_header_append() prototype as it isn't used anymore, the | Daniel Stenberg | |
| function was moved to http.c and was made static and renamed | |||
| 2010-01-06 | - Make sure the progress callback is called repeatedly even during very slow | Daniel Stenberg | |
| name resolves when c-ares is used for resolving. | |||
| 2010-01-06 | Julien Chaffraix fixed so that the fragment part in an URL is not sent to ↵ | Claes Jakobsson | |
| the server anymore | |||
| 2010-01-03 | - Julien Chaffraix eliminated a duplicated initialization in singlesocket(). | Kamil Dudka | |
| 2010-01-01 | update copyright year since we are in 2010 now | Daniel Stenberg | |
| 2010-01-01 | - Ingmar Runge enhanced libcurl's FTP engine to support the PRET command. This | Daniel Stenberg | |
| command is a special "hack" used by the drftpd server, but even though it is a custom extension I've deemed it fine to add to libcurl since this server seems to survive and people keep using it and want libcurl to support it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also usable from the curl tool with --ftp-pret. Using this option on a server that doesn't support this command will make libcurl fail. | |||
| 2009-12-31 | turned CURLOPT_MAIL_RCPT into a curl_slist list instead to support multiple | Daniel Stenberg | |
| receivers, and made the command line tool thus support the option specified many times | |||
| 2009-12-30 | modified to get the EHLO domain from the path part of the URL instead of the | Daniel Stenberg | |
| user name | |||
| 2009-12-30 | moved the SMTP payload escape function into Curl_smtp_escape_eob and put | Daniel Stenberg | |
| it in smtp.c | |||
| 2009-12-30 | (SMTP) support DATA better in the server and make sure to "escape" CRLF.CRLF | Daniel Stenberg | |
| sequences in uploaded data. The test server doesn't "decode" escaped dot-lines but instead test cases must be written to take them into account. Added test case 803 to verify dot-escaping. | |||
| 2009-12-30 | Oops, should have removed 'not' in previous commit. | Yang Tse | |
| 2009-12-30 | VMS specific preprocessor symbol checking adjustments | Yang Tse | |
| 2009-12-30 | Replaced stricmp() usage with our portable strequal() | Yang Tse | |
| 2009-12-29 | move HTTP-specific functions to http.c where they belong | Daniel Stenberg | |
| 2009-12-25 | first shot at actually doing the SMTP upload as well, not doing the proper | Daniel Stenberg | |
| end-of-body treatment | |||
| 2009-12-20 | remove some unused code | Daniel Stenberg | |
| 2009-12-20 | free the allocated mailbox name at disconnect | Daniel Stenberg | |
| 2009-12-19 | fixed a precaution check in the cookie code, pointed out by Julien Chaffraix | Daniel Stenberg | |
| 2009-12-17 | Fix compilation failure | Yang Tse | |
| 2009-12-17 | uh, assign the bool it points to properly | Daniel Stenberg | |
| 2009-12-17 | Stop overloading the conn->protocol field with the PROT_MISSING bit. It | Daniel Stenberg | |
| really didn't belong there and had no real point. | |||
| 2009-12-17 | Remove pointless storing of the protocol as a string within the connectdata | Daniel Stenberg | |
| struct, and instead use the already stored string in the handler struct. | |||
| 2009-12-17 | - David Byron fixed Curl_ossl_cleanup to actually call ENGINE_cleanup when | Daniel Stenberg | |
| available. | |||
| 2009-12-16 | Follow-up fix for the proxy fix I did for Jon Nelson's bug. It turned out I | Daniel Stenberg | |
| was a bit too quick and broke test case 1101 with that change. The order of some of the setups is sensitive. I now changed it slightly again. | |||
| 2009-12-14 | - Jon Nelson found a regression that turned out to be a flaw in how libcurl | Daniel Stenberg | |
| detects and uses proxies based on the environment variables. If the proxy was given as an explicit option it worked, but due to the setup order mistake proxies would not be used fine for a few protocols when picked up from '[protocol]_proxy'. Obviously this broke after 7.19.4. I now also added test case 1106 that verifies this functionality. (http://curl.haxx.se/bug/view.cgi?id=2913886) | |||
| 2009-12-14 | Fix compiler warning | Yang Tse | |
| 2009-12-14 | Fix compiler warnings | Yang Tse | |
| 2009-12-12 | split out more protocol-specific structs from urldata.h into their own | Daniel Stenberg | |
| protocol-specific header files | |||
| 2009-12-12 | introducing IMAP, POP3 and SMTP support (still lots of polish left to do) | Daniel Stenberg | |
| 2009-12-11 | Prevent rewinding unless pipelining. | Yang Tse | |
| See http://curl.haxx.se/mail/lib-2009-12/0107.html | |||
| 2009-12-11 | Removed function prototype without implementation | Yang Tse | |
| 2009-12-10 | - Constantine Sapuntzakis figured out a case which would lead to libcurl | Daniel Stenberg | |
| accessing alredy freed memory and thus crash when using HTTPS (with OpenSSL), multi interface and the CURLOPT_DEBUGFUNCTION and a certain order of cleaning things up. I fixed it. (http://curl.haxx.se/bug/view.cgi?id=2891591) | |||
| 2009-12-10 | minor indent change | Daniel Stenberg | |
| 2009-12-07 | - Martin Storsjo made libcurl use the Expect: 100-continue header for posts | Daniel Stenberg | |
| with unknown size. Previously it was only used for posts with a known size larger than 1024 bytes. | |||
| 2009-12-02 | lib/nss.c: avoid use of uninitialized value | Kamil Dudka | |
| 2009-12-01 | - If the Expect: 100-continue header has been set by the application through | Daniel Stenberg | |
| curl_easy_setopt with CURLOPT_HTTPHEADER, the library should set data->state.expect100header accordingly - the current code (in 7.19.7 at least) doesn't handle this properly. Martin Storsjo provided the fix! | |||
| 2009-11-28 | s/socklen_t/curl_socklen_t/g | Yang Tse | |
| 2009-11-28 | Fix compiler warning: unused variable `data' | Yang Tse | |
| 2009-11-27 | - Markus Koetter provided a polished and updated version of Chad Monroe's TFTP | Daniel Stenberg | |
| rework patch that now integrates TFTP properly into libcurl so that it can be used non-blocking with the multi interface and more. BLKSIZE also works. The --tftp-blksize option was added to allow setting the TFTP BLKSIZE from the command line. | |||
| 2009-11-26 | - Extended and fixed the change I did on Dec 11 for the the progress | Daniel Stenberg | |
| meter/callback during FTP command/response sequences. It turned out it was really lame before and now the progress meter SHOULD get called at least once per second. | |||
| 2009-11-24 | refreshed | Daniel Stenberg | |
| 2009-11-20 | - Constantine Sapuntzakis identified a write after close, as the sockets were | Daniel Stenberg | |
| closed by libcurl before the SSL lib were shutdown and they may write to its socket. Detected to at least happen with OpenSSL builds. | |||
| 2009-11-20 | - Jad Chamcham pointed out a bug with connection re-use. If a connection had | Daniel Stenberg | |
| CURLOPT_HTTPPROXYTUNNEL enabled over a proxy, a subsequent request using the same proxy with the tunnel option disabled would still wrongly re-use that previous connection and the outcome would only be badness. | |||
| 2009-11-19 | Explicit initialization of all FTP struct members in ftp_init() | Yang Tse | |
 |
index : curl | |
| cURL mirror with patches applied | Ben |
| aboutsummaryrefslogtreecommitdiff |