Age | Commit message (Collapse) | Author |
|
I also documented the fact that the OpenSSL engine also supports them.
|
|
comparison between signed and unsigned integer expressions
suggest parentheses around '&&' within '||' (twice)
|
|
|
|
|
|
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP
or SMTP server advertised support for it even though a user's password
was supplied but bearer token wasn't.
Modified the selection logic so that XOAUTH2 will only be selected if
the server supports it and A) The curl user/libcurl programmer has
specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2)
The bearer token is specified. Obviously if XOAUTH is asked for via
the login option but no token is specified the user will receive a
authentication failure which makes more sense than no known
authentication mechanisms supported!
|
|
Initial library considerations documented in lib/README.http2
|
|
An enumerated type is mixed with another type
|
|
warning: `code' might be used uninitialized in this function
|
|
|
|
|
|
... when doing upload it would return the wrong values at times. This
commit attempts to cleanup the mess.
Bug: http://curl.haxx.se/mail/lib-2013-08/0109.html
Reported-by: Mike Mio
|
|
When removing an already removed handle, avoid that to ruin the
internals and just return OK instead.
|
|
|
|
'struct monitor', introduced in 6cf8413e, already exists in an IRIX
header file (sys/mon.h) which gets included via various standard headers
by lib/easy.c
cc-1101 cc: ERROR File = ../../curl/lib/easy.c, Line = 458
"monitor" has already been declared in the current scope.
Reported-by: Tor Arntsen
|
|
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
|
|
I brought back security.h in commit bb5529331334e. As we actually
already found out back in 2005 in commit 62970da675249, the file name
security.h causes problems so I renamed it curl_sec.h instead.
|
|
Added the ability to use an XOAUTH2 bearer token [RFC6750] with SMTP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
|
|
Added the ability to use an XOAUTH2 bearer token [RFC6750] with IMAP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"A001 AUTHENTICATE XOAUTH2 <bearer token>".
|
|
ISO C forbids forward references to 'enum' types
|
|
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
option CURLOPT_XOAUTH2_BEARER for authentication using RFC6749 "OAuth
2.0 Authorization Framework".
|
|
Added the ability to generated a base64 encoded XOAUTH2 token
containing: "user=<username>^Aauth=Bearer <bearer token>^A^A"
as per RFC6749 "OAuth 2.0 Authorization Framework".
|
|
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
|
|
|
|
Make sure we always return CURLM_CALL_MULTI_PERFORM when we reach
CURLM_STATE_DONE since the state is transient and it can very well
continue executing as there is nothing to wait for.
Bug: http://curl.haxx.se/mail/lib-2013-08/0211.html
Reported-by: Yi Huang
|
|
... this also makes sure that the progess callback gets called more
often during TFTP transfers.
Added test 1238 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1269
Reported-by: Jo3
|
|
I build curl.exe (using MingW) with '-DCURLDEBUG' and by importing from
libcurl.dll. Which means the new curl_easy_perform_ev() must be
exported from libcurl.dll.
|
|
Doing curl_multi_add_handle() on an easy handle that is already added to
a multi handle now returns this error code. It previously returned
CURLM_BAD_EASY_HANDLE for this condition.
|
|
The closure_handle is "owned" by the multi handle and it is
unconditional so the setting up of it should be in the Curl_multi_handle
function rather than curl_multi_add_handle.
|
|
As it is done unconditionally in multi_init() this code will never run!
|
|
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
|
|
|
|
libcurl quietly truncates usernames, passwords, and options from
before an '@' sign in a URL to 255 (= MAX_CURL_PASSWORD_LENGTH - 1)
characters to fit in fixed-size buffers on the stack. Allocate a
buffer large enough to fit the parsed fields on the fly instead to
support longer passwords.
After this change, there are no more uses of MAX_CURL_OPTIONS_LENGTH
left, so stop defining that constant while at it. The hardcoded max
username and password length constants, on the other hand, are still
used in HTTP proxy credential handling (which this patch doesn't
touch).
Reported-by: Colby Ranger
|
|
Instead of nesting "if(success)" blocks and leaving the reader in
suspense about what happens in the !success case, deal with failure
cases early, usually with a simple goto to clean up and return from
the function.
No functional change intended. The main effect is to decrease the
indentation of this function slightly.
|
|
libcurl truncates usernames, passwords, and options set with
curl_easy_setopt to 255 (= MAX_CURL_PASSWORD_LENGTH - 1) characters.
This doesn't affect the return value from curl_easy_setopt(), so from
the caller's point of view, there is no sign anything strange has
happened, except that authentication fails.
For example:
# Prepare a long (300-char) password.
s=0123456789; s=$s$s$s$s$s$s$s$s$s$s; s=$s$s$s;
# Start a server.
nc -l -p 8888 | tee out & pid=$!
# Tell curl to pass the password to the server.
curl --user me:$s http://localhost:8888 & sleep 1; kill $pid
# Extract the password.
userpass=$(
awk '/Authorization: Basic/ {print $3}' <out |
tr -d '\r' |
base64 -d
)
password=${userpass#me:}
echo ${#password}
Expected result: 300
Actual result: 255
The fix is simple: allocate appropriately sized buffers on the heap
instead of trying to squeeze the provided values into fixed-size
on-stack buffers.
Bug: http://bugs.debian.org/719856
Reported-by: Colby Ranger
|
|
libcurl truncates usernames and passwords it reads from .netrc to
LOGINSIZE and PASSWORDSIZE (64) characters without any indication to
the user, to ensure the values returned from Curl_parsenetrc fit in a
caller-provided buffer.
Fix the interface by passing back dynamically allocated buffers
allocated to fit the user's input. The parser still relies on a
256-character buffer to read each line, though.
So now you can include an ~246-character password in your .netrc,
instead of the previous limit of 63 characters.
Reported-by: Colby Ranger
|
|
This makes it possible to increase the size of the buffers when needed
in later patches. No functional change yet.
|
|
Instead of remembering before each "return" statement which temporary
allocations, if any, need to be freed, take care to set pointers to
NULL when no longer needed and use a goto to a common block to exit
the function and free all temporaries.
No functional change intended. Currently the only temporary buffer in
this function is "proxy" which is already correctly freed when
appropriate, but there will be more soon.
|
|
Use appropriately sized buffers on the heap instead of fixed-size
buffers on the stack, to allow for longer usernames and passwords.
Callers never pass anything longer than MAX_CURL_USER_LENGTH (resp.
MAX_CURL_PASSWORD_LENGTH), so no functional change inteded yet.
|
|
Adding this line allows libcurl to return the server response when
performing a search command via a custom request.
|
|
... just to make them easier to print in debug ouputs while debugging.
They are still within #ifdef [debugbuild].
|
|
This makes the socket callback get called with the proper bitmask as
otherwise the application could be left hanging waiting for reading on
an upload connection!
Bug: http://curl.haxx.se/mail/lib-2013-08/0043.html
Reported-by: Bill Doyle
|
|
... prior to calling PK11_GenerateRandom()
|
|
With everything being struct SessionHandle pointers now, this rename
makes multi.c use the library-wide practise of calling that pointer
'data' instead of the previously used 'easy'.
|
|
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
|
|
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
|
|
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
|
|
|
|
The take down of the global dns cache didn't take CURLOPT_RESOLVE names
into account.
|
|
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d89ccb (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
|
|
The previous naming scheme ftp_state_post_XXXX() wasn't really helpful
as it wasn't always immediately after 'xxxx' and it wasn't easy to
understand what it does based on such a name.
This new one is instead ftp_state_yyyy() where yyyy describes what it
does or sends.
|