Age | Commit message (Collapse) | Author |
|
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -U bob:b -x http://localhost:8181 http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6d42ca0780f8e0a747cecf9ba45f151
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -x http://localhost:8181 http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
|
|
- Fix compile errors that occur in openssl.c when OpenSSL lib was
built without DSA support.
Bug: https://github.com/curl/curl/issues/1361
Reported-by: neheb@users.noreply.github.com
|
|
No need to redeclare the variable.
|
|
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
|
|
Closes #1356
|
|
|
|
|
|
- If SSL_get_error is called but no extended error detail is available
then show that SSL_ERROR_* as a string.
Prior to this change there was some inconsistency in that case: the
SSL_ERROR_* code may or may not have been shown, or may have been shown
as unknown even if it was known.
Ref: https://github.com/curl/curl/issues/1300
Closes https://github.com/curl/curl/pull/1348
|
|
Ref: https://curl.haxx.se/mail/lib-2017-02/0097.html
Closes https://github.com/curl/curl/pull/1272
|
|
The code would refer to the wrong data pointer. Only debug builds do
this - for verbosity.
Reported-by: zelinchen@users.noreply.github.com
Fixes #1329
|
|
Broken a week ago in 6448f98.
Closes https://github.com/curl/curl/pull/1337
|
|
... by removing the else branch after a return, break or continue.
Closes #1310
|
|
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
|
|
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
|
|
Broken a few days ago in 6448f98.
Bug: https://curl.haxx.se/mail/lib-2017-03/0015.html
|
|
This prevents a "Descriptor is not a socket" error for WinSSL.
Reported-by: Antony74@users.noreply.github.com
Reviewed-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1239
|
|
Follow-up to 5278462
See https://github.com/curl/curl/issues/1095
|
|
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
|
|
|
|
CID 1402159 and 1402158
|
|
|
|
Verified with OpenSSL 1.1.0e and OpenSSL master (1.1.1)
|
|
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
|
|
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes #1286
Closes #1302
|
|
|
|
Assisted-by: Ray Satiro
Bug: https://curl.haxx.se/mail/lib-2017-03/0009.html
|
|
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
|
|
Pointed-out-by: Ray Satiro
Bug: https://curl.haxx.se/mail/lib-2017-03/0004.html
|
|
Assisted-by: Simon Warta <simon@kullo.net>
Ref: https://github.com/curl/curl/pull/1228
|
|
MSVC with LTCG detects this at warning level 4.
Closes #1304
|
|
Move the proxy parse/init into helper create_conn_helper_init_proxy to
mitigate the chances some non-proxy code will be mistakenly added to it.
Ref: https://github.com/curl/curl/issues/1274#issuecomment-281556510
Ref: https://github.com/curl/curl/pull/1293
Closes https://github.com/curl/curl/pull/1298
|
|
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
|
|
In DarwinSSL the SSLSetPeerDomainName function is used to enable both
sending SNI and verifying the host. When host verification is disabled
the function cannot be called, therefore SNI is disabled as well.
Closes https://github.com/curl/curl/pull/1240
|
|
If size_t is 32 bits, MSVC warns:
warning C4310: cast truncates constant value
The warning is harmless as CURL_MASK_SCOFFT gets
truncated to the maximum value of size_t.
|
|
MSVC complains:
warning C4701: potentially uninitialized local variable 'output_token_len' used
|
|
wolfSSL >= 3.6.0 supports getting its library version string at runtime.
|
|
Prior to this change if curl was built with Unix Socket support
(--enable-unix-sockets) and without Proxy support (--disable-proxy) then
unix socket options would erroneously be ignored.
Regression introduced in:
0b8d682f81ee9acb763dd4c9ad805fe08d1227c0
Bug: https://github.com/curl/curl/issues/1274
Reported-by: mccormickt12@users.noreply.github.com
Closes https://github.com/curl/curl/pull/1289
|
|
|
|
|
|
|
|
|
|
If the compile-time CURL_CA_BUNDLE location is defined use it as the
default value for the proxy CA bundle location, which is the same as
what we already do for the regular CA bundle location.
Ref: https://github.com/curl/curl/pull/1257
|
|
Closes #1285
|
|
Reported-by: shachaf@users.noreply.github.com
Fixes #1281
|
|
f77dabe broke builds in Windows using Windows SSPI but not Windows SSL.
Bug: https://github.com/curl/curl/issues/1276
Reported-by: jveazey@users.noreply.github.com
|
|
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
|
|
|
|
|
|
The CURLOPT_SSL_VERIFYSTATUS option was not properly handled by libcurl
and thus even if the status couldn't be verified, the connection would
be allowed and the user would not be told about the failed verification.
Regression since cb4e2be7c6d42ca
CVE-2017-2629
Bug: https://curl.haxx.se/docs/adv_20170222.html
Reported-by: Marcus Hoffmann
|
|
- If the server has provided another challenge use it as the replacement
input token if stale=TRUE. Otherwise previous credentials have failed
so return CURLE_LOGIN_DENIED.
Prior to this change the stale directive was ignored and if another
challenge was received it would cause error CURLE_BAD_CONTENT_ENCODING.
Ref: https://tools.ietf.org/html/rfc2617#page-10
Bug: https://github.com/curl/curl/issues/928
Reported-by: tarek112@users.noreply.github.com
|