aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2008-08-06remove debug code I accidentally left in hereDaniel Stenberg
2008-08-06Removed TRACE() code.Gisle Vanem
2008-08-04- Yehoshua Hershberg found a problem that would make libcurl re-use aDaniel Stenberg
connection with the multi interface even if a previous use of it caused a CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed SSL connections properly close the connections.
2008-08-04- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 andDaniel Stenberg
proved how PUT and POST with a redirect could lead to a "hang" due to the data stream not being rewound properly when it had to in order to get sent properly (again) to the subsequent URL. This is now fixed and these test cases are no longer disabled.
2008-08-03- Test case 1041 (added by Daniel Fandrich April 14th) proved a bug where PUTDaniel Stenberg
with -C - sent garbage in the Content-Range: header. I fixed this problem by making sure libcurl always sets the size of the _entire_ upload if an app attemps to do resumed uploads since libcurl simply cannot know the size of what is currently at the server end. Test 1041 is no longer disabled.
2008-08-01Added support for --append on SFTP uploads. Unfortunately, OpenSSH doesn'tDan Fandrich
support this so it goes untested.
2008-08-01User names embedded in proxy URLs without a password were parsedDan Fandrich
incorrectly--the host name is treated as part of the user name and the port number becomes the password. This can be observed in test 279 (was KNOWN_ISSUE #54).
2008-08-01Added more code under #ifndef CURL_DISABLE_HTTP to fix builds withDan Fandrich
--disable-http
2008-08-01Refactored create_conn by breaking it up into many smaller functionsDan Fandrich
2008-08-01Made a parameter constDan Fandrich
2008-07-31Fixed a problem with any FTP URL or any URLs containing an IPv6 addressDan Fandrich
being mangled when passed to proxies when CURLOPT_PORT is also set (reported by Pramod Sharma).
2008-07-31Fixed parsing of an IPv6 proxy address to support a scope identifier,Dan Fandrich
as well as IPv4 addresses in IPv6 format. Also, better handle the case of a malformatted IPv6 address (avoid empty and NULL strings).
2008-07-31Fixed a couple of problems in the IPv6 scope code. First, a host name inDan Fandrich
an URL in a Location: header didn't have the scope ID removed, so an invalid host name was used. Second, when the scope ID was removed, it also removed any port number that may have existed in the URL.
2008-07-30- Phil Blundell added the CURLOPT_SCOPE option, as well as adjusted the URLDaniel Stenberg
parser to allow numerical IPv6-addresses to be specified with the scope given, as per RFC4007 - with a percent letter that itself needs to be URL escaped. For example, for an address of fe80::1234%1 the HTTP URL is: "http://[fe80::1234%251]/"
2008-07-30- PHP's bug report #43158 (http://bugs.php.net/bug.php?id=43158) identifies aDaniel Stenberg
true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that would set it to something non-zero would return before the assign in almost all error cases. The internal variable is now set to non-zero from the start of the function only to get cleared later on if things work out fine.
2008-07-30Factored out Curl_copy_header_valueDan Fandrich
2008-07-30Sync comment with reality.Yang Tse
2008-07-30Undo using the sreadfrom() wrapper to replace recvfrom() in our code.Yang Tse
2008-07-30Minor Symbian updates.Dan Fandrich
2008-07-30Fixed --use-ascii to properly convert text files on Symbian OS, MS-DOSDan Fandrich
and OS/2.
2008-07-29Eliminate a unnecessary socket creation in Curl_getaddrinfo for an IPv4Dan Fandrich
address in an IPv6 capable libcurl.
2008-07-29ignore *.dist filesYang Tse
2008-07-28Fixed display of the interface bind address in the trace output when it'sDan Fandrich
an IPv6 address.
2008-07-27setup.h handles definition of _REENTRANT based on NEED_REENTRANTYang Tse
definition which might be defined in config.h or config-*.h files
2008-07-27Eliminate a unnecessary socket creation in Curl_getaddrinfo for an IPv4Dan Fandrich
address in an IPv6 capable libcurl.
2008-07-26- David Bau filed bug report #2026240 "CURL_READFUNC_PAUSE leads to bufferDaniel Stenberg
overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two problems, and providing the fix for them: - CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is designed for but paused _receiving_ of data! - libcurl didn't internally set the read counter to zero when this return code was detected, which would potentially lead to junk getting sent to the server.
2008-07-24ignore curllib.vcprojYang Tse
2008-07-22minor reordering in OS/400 config/setup filesYang Tse
2008-07-21Change recvfrom's sixth argument data type to the 'historically standard' 'int'Yang Tse
data type for systems where this sixth argument is prototyped as a void pointer. Start of thread: http://curl.haxx.se/mail/lib-2008-07/0153.html
2008-07-21Undefine 'byte' due to dict.c.Gisle Vanem
2008-07-21fix compiler warning: comparison between signed and unsignedYang Tse
2008-07-21Adjust recvfrom's sixth arg data type definition for NetWare (LIBC)Yang Tse
2008-07-21Use the sreadfrom() wrapper to replace recvfrom() in our code.Yang Tse
2008-07-21when recvfrom prototype uses a void pointer for arguments 2, 5 or 6 this willYang Tse
now cause the definition of RECVFROM_TYPE_ARG2_IS_VOID, RECVFROM_TYPE_ARG5_IS_VOID or RECVFROM_TYPE_ARG6_IS_VOID, as appropriate.
2008-07-17RECVFROM_TYPE_ARG2, RECVFROM_TYPE_ARG5 and RECVFROM_TYPE_ARG6 are now definedYang Tse
to the data type pointed by its respective argument and not the pointer type.
2008-07-16fix commentYang Tse
2008-07-16Configure process now checks availability of recvfrom() socket function andYang Tse
finds out its return type and the types of its arguments. Added definitions for non-configure systems config files, and introduced macro sreadfrom which will be used on udp sockets as a recvfrom() wrapper.
2008-07-15add comment for include pathsYang Tse
2008-07-14Move _REENTRANT definition earlier in lib/setup.hYang Tse
2008-07-14Removed inclusion of remaining system header files from configuration files.Yang Tse
These are included from lib/setup.h or specific source code file.
2008-07-14Inclusion of <extra/stricmp.h> and <extra/strdup.h> is moved to lib/setup.hYang Tse
2008-07-14Remove duplicate file inclusions. These are already done in lib/setup.hYang Tse
and lib/setup_once.h
2008-07-14Remove duplicate file inclusions. These are already done in lib/setup.hYang Tse
2008-07-14HTTP_ONLY definition check in lib/setup.h is now done once that configurationYang Tse
file has been included. In this way if symbol is defined in the config file it will no longer be ignored.
2008-07-11fix multiple header inclusion prevention definitionYang Tse
2008-07-11move multiple header inclusion prevention definition to top of fileYang Tse
2008-07-11Added missing multiple header inclusion prevention definitionYang Tse
2008-07-11indent and comment cleanup (no code change)Daniel Stenberg
2008-07-11- Daniel Fandrich found out we didn't pass on the user-agent properly whenDaniel Stenberg
doing "proxy-tunnels" with non-HTTP prototols and that was simply because the code assumed the user-agent was only needed for HTTP.
2008-07-11Changed slightly the SFTP quote commands chmod, chown and chgrp to onlyDan Fandrich
set the attribute that has changed instead of all possible ones. Hopefully, this will solve the "Permission denied" problem that Nagarajan Sreenivasan reported when setting some modes, but regardless, it saves a protocol round trip in the chmod case.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 18:39:43 +0000