| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
|
|
|
|
|
|
setup-vms.h: Symbol case fixups submitted by Michael Steve
build_gnv_curl_pcsi_desc.com: VSI aka as VMS Software, is now the
supplier of new versions of VMS. The install kit needs to accept
VSI as a producer.
|
|
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
|
|
packages/vms/gnv_link_curl.com was assuming only a single letter suffix
in the openssl version. That assumption has been fixed for 7.40.
|
|
Use Unix when generically writing about Unix based systems as UNIX is
the trademark and should only be used in a particular product's name.
|
|
packages/vms/backup_gnv_curl_src.com: Originally copied from Bash port.
|
|
lib/setup-vms.h : VAX HP OpenSSL port is ancient, needs help.
More defines to set symbols to uppercase.
src/tool_main.c : Fix parameter to vms_special_exit() call.
packages/vms/ :
backup_gnv_curl_src.com : Fix the error message to have the correct package.
build_curl-config_script.com : Rewrite to be more accurate.
build_libcurl_pc.com : Use tool_version.h now.
build_vms.com : Fix to handle lib/vtls directory.
curl_gnv_build_steps.txt : Updated build procedure documentation.
generate_config_vms_h_curl.com :
* VAX does not support 64 bit ints, so no NTLM support for now.
* VAX HP SSL port is ancient, needs some help.
* Disable NGHTTP2 for now, not ported to VMS.
* Disable UNIX_SOCKETS, not available on VMS yet.
* HP GSSAPI port does not have gss_nt_service_name.
gnv_link_curl.com : Update for new curl structure.
pcsi_product_gnv_curl.com : Set up to optionally do a complete build.
|
|
|
|
Add the curl release notes to the release note document generated for
VMS packages.
Add the different filenames generated by a daily build to the
cleanup procedures.
|
|
VMS modified files either missing from a previous commit and changes
to remove references to CVS repositories.
|
|
|
|
These are the files needed to build VMS distribution packages known as
PCSI kits.
Also minor update to the existing files, mainly to the documentation and
file clean up code.
|
|
|
|
Update the packages/vms/readme file to be current.
Also some files for the GNV based build were either missing or needed an
update.
curl_crtl_init.c is a special file that is run before main() to
set up the proper C runtime behavior.
generate_vax_transfer.com generates the VAX transfer vector modules from
the gnv_libcurl_symbols.opt file.
gnv_conftest.c_first is a helper file needed for configure scripts to
come up with the expected answers on VMS.
gnv_libcurl_symbols.opt is the public symbols for the libcurl shared
image.
gnv_link_curl.com builds the shared libcurl image and rebuilds other
programs to use it.
macro32_exactcase.patch is a hack to make a local copy of the VMS Macro32
assembler case sensitive, which is needed to build the VAX transfer modules.
report_openssl_version.c is a tool for help verify that the libcurl
shared image is being built for a minium version of openssl.
|
|
|
|
|
|
In the reorganization of the build_vms.com the debug and float options
were not fixed up correctly.
|
|
Update the build_vms.com to detect and use zlib shared image installed
by the ZLIB kit produced by Jean-Francois Pieronne, and the also the
future ZLIB 1.2.8 kit in addition to the older ZLIB kits.
Also fix the indentation to match one of the common standards used for
VMS DCL command files and removed the hard tab characters.
Tested on OpenVMS 8.4 Alpha and IA64, and OpenVMS 7.3 VAX.
|
|
This patch removes building curlbuild.h from the build_vms.com procedure
and uses the one in the daily or release tarball instead.
packages/vms/build_curlbuild_h.com is obsolete with this change.
Accessing the library module name "tool_main" needs different handling
when the optional extended parsing is enabled.
Tested on IA64/VMS 8.4 and VAX/VMS 7.3
|
|
|
|
Added missing slash in cc_full_list.
Removed unwanted extra quotes inside symbol tool_main
for non-VAX architectures that triggered link failure.
Replaced curl_sys_inc with sys_inc.
|
|
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
|
|
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VMS builder bad behavior when used in a batch job.
Various ".LIS" and ".MAP" files created without being requested
by a "LIST" command-line option, and in the wrong place, too.
Some minor typographical changes.
|
|
http://curl.haxx.se/mail/lib-2009-12/0293.html
|
|
|
|
|
|
|
|
|
|
libcurl is used with other projects which also have a config.h.
|
|
|
|
|
|
|
|
|
|
So, until fixed this will remain FIXME.
|
|
|
|
setup_once.h. Inclusion of each header file is based on the definition of
NEED_MALLOC_H and NEED_MEMORY_H respectively.
|
|
|
|
non-blocking mode, and decouple function detection from function capability.
|
|
and when not crosscompiling verifies if it is IPv6 capable.
HAVE_INET_NTOP will only be defined when an IPv6 capable working
inet_ntop function is available.
|
