| Age | Commit message (Collapse) | Author |
|---|
|
Added the initial version of curl_sasl_gssapi.c and updated the project
files in preparation for adding GSS-API based Kerberos V5 support.
|
|
Added the necessary protocol and port definitions in order to support
SMB/CIFS.
|
|
Added the initial source files and updated the relevant project files in
order to support SMB/CIFS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renamed the CURLX_ONES file list definition in order to a) try and be
consistent with other file lists and b) to allow for the addition of
the curlx header files, which will assist with Visual Studio project
files generation rather than hard coding those files.
|
|
|
|
|
|
|
|
|
|
|
|
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
|
|
|
|
Rather than set the authentication options as part of the login details
specified in the URL, or via the older CURLOPT_USERPWD option, added a
new libcurl option to allow the login options to be set separately.
|
|
|
|
IFS compilation support, SSL GSKit backend by default, TLSv1.[12] support in
GSKit for OS400 >= V7R1, no more tabs in make scripts.
|
|
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1,
CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version
(CURL_SSLVERSION_TLSv1 means TLS 1.x).
axTLS:
axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one
of these should be used, so we don't allow the new enum values.
darwinssl:
Added support for the new enum values.
SChannel:
Added support for the new enum values.
CyaSSL:
Added support for the new enum values.
Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it
did the same before this commit), because CyaSSL cannot be configured to
use TLS 1.0-1.2.
GSKit:
GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow
those values.
Bugfix: There was a typo that caused wrong SSL versions to be passed to
GSKit.
NSS:
TLS minor version cannot be set, so we don't allow the new enum values.
QsoSSL:
TLS minor version cannot be set, so we don't allow the new enum values.
OpenSSL:
Added support for the new enum values.
Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0,
now it enables 1.0-1.2.
Command-line tool:
Added command line options for the new values.
|
|
Add the curl release notes to the release note document generated for
VMS packages.
Add the different filenames generated by a daily build to the
cleanup procedures.
|
|
VMS modified files either missing from a previous commit and changes
to remove references to CVS repositories.
|
|
|
|
These are the files needed to build VMS distribution packages known as
PCSI kits.
Also minor update to the existing files, mainly to the documentation and
file clean up code.
|
|
|
|
Update the packages/vms/readme file to be current.
Also some files for the GNV based build were either missing or needed an
update.
curl_crtl_init.c is a special file that is run before main() to
set up the proper C runtime behavior.
generate_vax_transfer.com generates the VAX transfer vector modules from
the gnv_libcurl_symbols.opt file.
gnv_conftest.c_first is a helper file needed for configure scripts to
come up with the expected answers on VMS.
gnv_libcurl_symbols.opt is the public symbols for the libcurl shared
image.
gnv_link_curl.com builds the shared libcurl image and rebuilds other
programs to use it.
macro32_exactcase.patch is a hack to make a local copy of the VMS Macro32
assembler case sensitive, which is needed to build the VAX transfer modules.
report_openssl_version.c is a tool for help verify that the libcurl
shared image is being built for a minium version of openssl.
|
|
|
|
|
|
|
|
In the reorganization of the build_vms.com the debug and float options
were not fixed up correctly.
|
|
|
|
|
|
|
|
Update the build_vms.com to detect and use zlib shared image installed
by the ZLIB kit produced by Jean-Francois Pieronne, and the also the
future ZLIB 1.2.8 kit in addition to the older ZLIB kits.
Also fix the indentation to match one of the common standards used for
VMS DCL command files and removed the hard tab characters.
Tested on OpenVMS 8.4 Alpha and IA64, and OpenVMS 7.3 VAX.
|
|
This patch removes building curlbuild.h from the build_vms.com procedure
and uses the one in the daily or release tarball instead.
packages/vms/build_curlbuild_h.com is obsolete with this change.
Accessing the library module name "tool_main" needs different handling
when the optional extended parsing is enabled.
Tested on IA64/VMS 8.4 and VAX/VMS 7.3
|
|
|
|
Added missing slash in cc_full_list.
Removed unwanted extra quotes inside symbol tool_main
for non-VAX architectures that triggered link failure.
Replaced curl_sys_inc with sys_inc.
|
|
|
|
This is untested, but ought to be enough to still allow it
to work automatically when the entire curl source tree is
dropped into a full Android source tree.
|
|
|
|
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
|
|
|
|
gcc on DOS hasn't really supported COFF-debug (-gcoff) on djgpp for a
long time.
"Sounds like the COFF debug info generation has bit-rotted in GCC.
Nothing new here, no other platform uses COFF AFAIK."
So lets drop it too.
URL: http://curl.haxx.se/mail/lib-2013-01/0130.html
|
|
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
|
|
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
|
|
93 *.c source files renamed to use our standard naming scheme.
This change affects 77 files in libcurl's source tree.
|
