aboutsummaryrefslogtreecommitdiff
path: root/src/main.c
AgeCommit message (Collapse)Author
2010-01-23Added -J/--remote-header-name.Bjorn Stenberg
2010-01-02- Make curl support --ssl and --ssl-reqd instead of the previous FTP-specificDaniel Stenberg
versions --ftp-ssl and --ftp-ssl-reqd as these options are now used to control SSL/TLS for IMAP, POP3 and SMTP as well in addition to FTP. The old option names are still working but the new ones are the prefered ones (listed and documented).
2010-01-01update copyright year since we are in 2010 nowDaniel Stenberg
2010-01-01- Ingmar Runge enhanced libcurl's FTP engine to support the PRET command. ThisDaniel Stenberg
command is a special "hack" used by the drftpd server, but even though it is a custom extension I've deemed it fine to add to libcurl since this server seems to survive and people keep using it and want libcurl to support it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also usable from the curl tool with --ftp-pret. Using this option on a server that doesn't support this command will make libcurl fail.
2009-12-31turned CURLOPT_MAIL_RCPT into a curl_slist list instead to support multipleDaniel Stenberg
receivers, and made the command line tool thus support the option specified many times
2009-12-30s/CURLOPT_WRITEHEADER/CURLOPT_HEADERDATA simply because it is a better nameDaniel Stenberg
2009-12-30VMS specific preprocessor symbol checking adjustmentsYang Tse
2009-12-12introducing IMAP, POP3 and SMTP support (still lots of polish left to do)Daniel Stenberg
2009-12-10- Siegfried Gyuricsko found out that the curl manual said --retry would retryDaniel Stenberg
on FTP errors in the transient 5xx range. Transient FTP errors are in the 4xx range. The code itself only tried on 5xx errors that occured _at login_. Now the retry code retries on all FTP transfer failures that ended with a 4xx response. (http://curl.haxx.se/bug/view.cgi?id=2911279)
2009-12-10- Fixed curl erroneously reporting output stream write failures with ↵Yang Tse
disabled buffering
2009-11-27- Markus Koetter provided a polished and updated version of Chad Monroe's TFTPDaniel Stenberg
rework patch that now integrates TFTP properly into libcurl so that it can be used non-blocking with the multi interface and more. BLKSIZE also works. The --tftp-blksize option was added to allow setting the TFTP BLKSIZE from the command line.
2009-11-23- Bjorn Augustsson reported a bug which made curl not report any problems evenDaniel Stenberg
though it failed to write a very small download to disk (done in a single fwrite call). It turned out to be because fwrite() returned success, but there was insufficient error-checking for the fclose() call which tricked curl to believe things were fine.
2009-10-27Fix Pelles C Win32 target compilation issuesYang Tse
2009-10-21- A patch in bug report #2883177 (http://curl.haxx.se/bug/view.cgi?id=2883177)Daniel Stenberg
by user 'koresh' introduced the --crlfile option to curl, which makes curl tell libcurl about a file with CRL (certificate revocation list) data to read.
2009-10-18Check for basename() is now done the same as other function checksYang Tse
2009-10-17Fix invalid file name characters handling on WindowsYang Tse
2009-10-15Replace tabs with spacesYang Tse
2009-10-14Fix an OOM handling problemYang Tse
2009-09-18fix compiler warning: comparison between signed and unsignedYang Tse
2009-08-24- Eric Wong introduced support for the new option -T. (dot) that makes curlDaniel Stenberg
read stdin in a non-blocking fashion. This also brings back -T- (minus) to the previous blocking behavior since it could break stuff for people at times.
2009-08-09Fixed some memory leaks in the command-line tool that caused most of theDan Fandrich
torture tests to fail.
2009-08-06added a cast to silent compiler warning with 64bit systems.Gunter Knauf
2009-08-03respect error code from ftruncate(), mentioned by Peter SylvesterDaniel Stenberg
2009-07-25properly free data returned by aprintf(), and bring back the code to beDaniel Stenberg
independent of libssh2 version as the client code isn't really meant to adapt to such build-time constraints.
2009-07-25blocked new stuff with HAVE_LIBSSH2_KNOWNHOST_API to check if this is our ↵Gunter Knauf
current memory leak.
2009-07-22- Added CURLOPT_SSH_KNOWNHOSTS, CURLOPT_SSH_KEYFUNCTION, CURLOPT_SSH_KEYDATA.Daniel Stenberg
They introduce known_host support for SSH keys to libcurl. See docs for details.
2009-07-17trial to fix a win64 compiler warning.Gunter Knauf
2009-07-09- Eric Wong introduced curlx_nonblock() that the curl tool now (re-)uses forDaniel Stenberg
setting a file descriptor non-blocking. Used by the functionality Eric himself brough on June 15th.
2009-06-20avoid pressanykey() call when curl finishes and was launched from bash.Gunter Knauf
2009-06-16- Reuven Wachtfogel made curl -o - properly produce a binary output on windowsDaniel Stenberg
(no newline translations). Use -B/--use-ascii if you rather get the ascii approach.
2009-06-16fix compiler warningYang Tse
2009-06-15fixed TRUE/FALSE case typo.Gunter Knauf
2009-06-15- Eric Wong's patch:Daniel Stenberg
This allows curl(1) to be used as a client-side tunnel for arbitrary stream protocols by abusing chunked transfer encoding in both the HTTP request and HTTP response. This requires server support for sending a response while a request is still being read, of course. If attempting to read from stdin returns EAGAIN, then we pause our sender. This leaves curl to attempt to read from the socket while reading from stdin (and thus sending) is paused.
2009-06-10- Fabian Keil ran clang on the (lib)curl code, found a bunch of warnings andDaniel Stenberg
contributed a range of patches to fix them.
2009-06-10VMS adjustmentsYang Tse
2009-06-10Adjusted to take in account that...Yang Tse
With the curl memory tracking feature decoupled from the debug build feature, CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows: CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug) DEBUGBUILD used for debug enabled specific code (--enable-debug)
2009-06-09fix compiler warningYang Tse
2009-06-08fix compiler warning: signed and unsigned type in conditional expressionYang Tse
2009-06-07- Eric Wong fixed --no-buffer to actually switch off output buffering. BeenDaniel Stenberg
broken since 7.19.0
2009-06-05introduction of os-specific.c and os-specific.hYang Tse
2009-05-01David McCreedy's "TPF-platform specific changes to various files" patchYang Tse
2009-04-28- Bug report #2709004 (http://curl.haxx.se/bug/view.cgi?id=2709004) by TimDaniel Stenberg
Chen pointed out how curl couldn't upload with resume when reading from a pipe. This ended up with the introduction of a new return code for the CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but that libcurl may try to resolve the situation anyway. In our case this means libcurl will attempt to instead read that much data from the stream instead of seeking and that way curl can now upload with resume when data is read from a stream!
2009-04-20- Gisle Vanem noticed that --libtool would produce bogus strings at times forDaniel Stenberg
OBJECTPOINT options. Now we've introduced a new function - my_setopt_str - within the app for setting plain string options to avoid the risk of this mistake happening.
2009-03-11Oops, make the memory magic debug stuff done before global init too just toDaniel Stenberg
catch them all. The memory debug stuff is not in the public API anyway.
2009-03-11- Kamil Dudka made the curl tool properly call curl_global_init() before anyDaniel Stenberg
other libcurl function.
2009-03-08- Bill Egert pointed out (http://curl.haxx.se/bug/view.cgi?id=2671602) thatDaniel Stenberg
curl didn't use sprintf() in a way that is documented to work in POSIX but since we use our own printf() code (from libcurl) that shouldn't be a problem. Nonetheless I modified the code to not rely on such particular features and to not cause further raised eyebrowse with no good reason.
2009-02-17- CURLOPT_FTP_CREATE_MISSING_DIRS can now be set to 2 in addition to 1 forDaniel Stenberg
plain FTP connections, and it will then allow MKD to fail once and retry the CWD afterwards. This is especially useful if you're doing many simultanoes connections against the same server and they all have this option enabled, as then CWD may first fail but then another connection does MKD before this connection and thus MKD fails but trying CWD works! The numbers can (should?) now be set with the convenience enums now called CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY. Tests has proven that if you're making an application that uploads a set of files to an ftp server, you will get a noticable gain in speed if you're using multiple connections and this option will be then be very useful.
2009-02-05Added an explicit buffer limit check in msdosify() (patch based on FreeBSD).Dan Fandrich
This couldn't ever overflow in curl, but might if the code were used elsewhere or under different conditions.
2009-02-02- Craig A West brought us: libcurl now defaults to do CONNECT with HTTPDaniel Stenberg
version 1.1 instead of 1.0 like before. This change also introduces the new proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0 option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0. I updated all test cases cases that use CONNECT and I tried to do some using --proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
2009-01-28- Markus Moeller introduced two new options to libcurl:Daniel Stenberg
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl to do GSS-style authentication with SOCKS5 proxies. The curl tool got the options called --socks5-gssapi-service and --socks5-gssapi-nec to enable these.