aboutsummaryrefslogtreecommitdiff
path: root/src/tool_getparam.c
AgeCommit message (Collapse)Author
2018-05-21curl: added --styled-outputDaniel Stenberg
It is enabled by default, so --no-styled-output will switch off the detection/use of bold headers. Closes #2538
2018-05-21curl: show headers in boldDaniel Stenberg
The feature is only enabled if the output is believed to be a tty. -J: There's some minor differences and improvements in -J handling, as now J should work with -i and it actually creates a file first using the initial name and then *renames* that to the one found in Content-Disposition (if any). -i: only shows headers for HTTP transfers now (as documented). Previously it would also show for pieces of the transfer that were HTTP (for example when doing FTP over a HTTP proxy). -i: now shows trailers as well. Previously they were not shown at all. --libcurl: the CURLOPT_HEADER is no longer set, as the header output is now done in the header callback.
2018-03-17CURLOPT_HAPROXYPROTOCOL: support the HAProxy PROXY protocolLawrence Matthews
Add --haproxy-protocol for the command line tool Closes #2162
2018-03-08curl tool: accept --compressed also if Brotli is enabled and zlib is not.Patrick Monnerat
2018-02-20url: Add option CURLOPT_HAPPY_EYEBALLS_TIMEOUTAnders Bakken
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy eyeball timeout value. - Add new optval macro CURL_HET_DEFAULT to represent the default happy eyeballs timeout value (currently 200 ms). - Add new tool option --happy-eyeballs-timeout-ms to expose CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the other -timeout options in the tool expect seconds not milliseconds. Closes https://github.com/curl/curl/pull/2260
2018-02-05time-cond: fix reading the file modification time on WindowsMichael Kaufmann
On Windows, stat() may adjust the unix file time by a daylight saving time offset. Avoid this by calling GetFileTime() instead. Fixes #2164 Closes #2204
2018-01-30curl: add --proxy-pinnedpubkeyDaniel Stenberg
To verify a proxy's public key. For when using HTTPS proxies. Fixes #2192 Closes #2268
2017-12-26tool_getparam: Support size modifiers for --max-filesizeGisle Vanem
- Move the size modifier detection code from limit-rate to its own function so that it can also be used with max-filesize. Size modifiers are the suffixes such as G (gigabyte), M (megabyte) etc. For example --max-filesize 1G Ref: https://curl.haxx.se/mail/archive-2017-12/0000.html Closes https://github.com/curl/curl/pull/2179
2017-11-04curl: speed up handling of many URLsDaniel Stenberg
By properly keeping track of the last entry in the list of URLs/uploads to handle, curl now avoids many meaningless traverses of the list which speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K URLs). Added test 1291, to verify that it doesn't take ages - but we don't have any detection of "too slow" command in the test suite. Reported-by: arainchik on github Fixes #1959 Closes #2052
2017-09-11code style: use spaces around plusesDaniel Stenberg
2017-09-11code style: use spaces around equals signsDaniel Stenberg
2017-09-02mime: use in curl cli tool instead of form API.Patrick Monnerat
Extended -F option syntax to support multipart mail messages. -F keyword headers= added to include custom headers in parts. Documentation upgraded.
2017-08-17ssh: add the ability to enable compression (for SCP/SFTP)Viktor Szakats
The required low-level logic was already available as part of `libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1] option.) This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION` (boolean) and the new `curl` command-line option `--compressed-ssh` to request this `libssh2` feature. To have compression enabled, it is required that the SSH server supports a (zlib) compatible compression method and that `libssh2` was built with `zlib` support enabled. [1] https://www.libssh2.org/libssh2_session_flag.html Ref: https://github.com/curl/curl/issues/1732 Closes https://github.com/curl/curl/pull/1735
2017-08-14strtoofft: reduce integer overflow risks globallyDaniel Stenberg
... make sure we bail out on overflows. Reported-by: Brian Carpenter Closes #1758
2017-08-07curl: detect and bail out early on parameter integer overflowsDaniel Stenberg
Make the number parser aware of the maximum limit curl accepts for a value and return an error immediately if larger, instead of running an integer overflow later. Fixes #1730 Closes #1736
2017-08-05getparameter: avoid returning uninitialized 'usedarg'Daniel Stenberg
Fixes #1728
2017-07-09tool_getparam: fix potentially uninitialized errJay Satiro
2017-06-28curl --socks5-{basic,gssapi}: control socks5 authKamil Dudka
Closes https://github.com/curl/curl/pull/1454
2017-06-26tool_getparam: fix memory leak on test 1147 OOM (torture tests)Jay Satiro
Bug: https://github.com/curl/curl/pull/1486#issuecomment-310926872 Reported-by: Dan Fandrich
2017-06-21--request-target: instead of --strip-path-slashDaniel Stenberg
... and CURLOPT_REQUEST_TARGET instead of CURLOPT_STRIP_PATH_SLASH. This option instead provides the full "alternative" target to use in the request, instead of extracting the path from the URL. Test 1298 and 1299 updated accordingly. Idea-by: Evert Pot Suggestion: https://daniel.haxx.se/blog/2017/06/19/options-with-curl/comment-page-1/#comment-18373 Closes #1593
2017-06-19http: add --strip-path-slash and CURLOPT_STRIP_PATH_SLASHDaniel Stenberg
... to enable sending "OPTIONS *" which wasn't possible previously. This option currently only works for HTTP. Added test cases 1298 + 1299 to verify Fixes #1280 Closes #1462
2017-06-16curl: prevent binary output spewed to terminalDaniel Stenberg
... unless "--output -" is used. Binary detection is done by simply checking for a binary zero in early data. Added test 1425 1426 to verify. Closes #1512
2017-06-15curl: allow --header and --proxy-header read from fileDaniel Stenberg
So many headers can be provided as @filename. Suggested-by: Timothe Litt Closes #1486
2017-05-09tool: fix remaining -Wcast-qual warningsMarcel Raad
Avoid casting away low-level const.
2017-05-06curl: remove tool_writeenv.[ch]Daniel Stenberg
... and USE_ENVIRONMENT and --environment. It was once added for RISC OS support and its platform specific behavior has been annoying ever since. Added in commit c3c8bbd3b2688da8e, mostly unchanged since then. Most probably not actually used for years. Closes #1463
2017-05-04curl: fix warning "comma at end of enumerator list"Daniel Stenberg
2017-05-02curl: non-boolean command line args reject --no- prefixesDaniel Stenberg
... and instead properly respond with an error message to the user instead of silently ignoring. Fixes #1453 Closes #1458
2017-05-01tool: Fix missing prototype warnings for CURL_DOES_CONVERSIONSJay Satiro
- Include tool_convert.h where needed. Bug: https://github.com/curl/curl/issues/1460 Reported-by: Gisle Vanem
2017-03-13Improve code readbilitySylvestre Ledru
... by removing the else branch after a return, break or continue. Closes #1310
2017-03-12url: add option CURLOPT_SUPPRESS_CONNECT_HEADERSDesmond O. Chang
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing proxy CONNECT response headers from the user callback functions CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION. - Add new tool option --suppress-connect-headers to expose CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT response headers from --dump-header and --include. Assisted-by: Jay Satiro Assisted-by: CarloCannas@users.noreply.github.com Closes https://github.com/curl/curl/pull/783
2017-03-08vtls: add options to specify range of enabled TLS versionsJozef Kralik
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as the --tls-max option of the curl tool. Closes https://github.com/curl/curl/pull/1166
2017-02-14curl: fix typo in time condition warning messageNick Draffen
The warning message had a typo. The argument long form is --time-cond not --timecond Closes #1263
2017-01-13unix_socket: add support for abstract unix domain socketIsaac Boukris
In addition to unix domain sockets, Linux also supports an abstract namespace which is independent of the filesystem. In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH internally, along with a flag to specify abstract socket. On non-supporting platforms, the abstract address will be interpreted as an empty string and fail gracefully. Also add new --abstract-unix-socket tool parameter. Signed-off-by: Isaac Boukris <iboukris@gmail.com> Reported-by: Chungtsun Li (typeless) Reviewed-by: Daniel Stenberg Reviewed-by: Peter Wu Closes #1197 Fixes #1061
2016-12-17tool_getparam.c: make comments use the up-to-date option namesDaniel Stenberg
2016-12-16preproxy: renamed what was added as SOCKS_PROXYDaniel Stenberg
CURLOPT_SOCKS_PROXY -> CURLOPT_PRE_PROXY Added the corresponding --preroxy command line option. Sets a SOCKS proxy to connect to _before_ connecting to a HTTP(S) proxy.
2016-12-16curl: normal socks proxies still use CURLOPT_PROXYDaniel Stenberg
... the newly introduced CURLOPT_SOCKS_PROXY is special and should be asked for specially. (Needs new code.) Unified proxy type to a single variable in the config struct.
2016-12-14checksrc: warn for assignments within if() expressionsDaniel Stenberg
... they're already frowned upon in our source code style guide, this now enforces the rule harder.
2016-12-13checksrc: stricter no-space-before-paren enforcementDaniel Stenberg
In order to make the code style more uniform everywhere
2016-11-28curl: remove --proxy-ssl* optionsDaniel Stenberg
There's mostly likely no need to allow setting SSLv2/3 version for HTTPS proxy. Those protocols are insecure by design and deprecated.
2016-11-24proxy: Support HTTPS proxy and SOCKS+HTTP(s)Alex Rousskov
* HTTPS proxies: An HTTPS proxy receives all transactions over an SSL/TLS connection. Once a secure connection with the proxy is established, the user agent uses the proxy as usual, including sending CONNECT requests to instruct the proxy to establish a [usually secure] TCP tunnel with an origin server. HTTPS proxies protect nearly all aspects of user-proxy communications as opposed to HTTP proxies that receive all requests (including CONNECT requests) in vulnerable clear text. With HTTPS proxies, it is possible to have two concurrent _nested_ SSL/TLS sessions: the "outer" one between the user agent and the proxy and the "inner" one between the user agent and the origin server (through the proxy). This change adds supports for such nested sessions as well. A secure connection with a proxy requires its own set of the usual SSL options (their actual descriptions differ and need polishing, see TODO): --proxy-cacert FILE CA certificate to verify peer against --proxy-capath DIR CA directory to verify peer against --proxy-cert CERT[:PASSWD] Client certificate file and password --proxy-cert-type TYPE Certificate file type (DER/PEM/ENG) --proxy-ciphers LIST SSL ciphers to use --proxy-crlfile FILE Get a CRL list in PEM format from the file --proxy-insecure Allow connections to proxies with bad certs --proxy-key KEY Private key file name --proxy-key-type TYPE Private key file type (DER/PEM/ENG) --proxy-pass PASS Pass phrase for the private key --proxy-ssl-allow-beast Allow security flaw to improve interop --proxy-sslv2 Use SSLv2 --proxy-sslv3 Use SSLv3 --proxy-tlsv1 Use TLSv1 --proxy-tlsuser USER TLS username --proxy-tlspassword STRING TLS password --proxy-tlsauthtype STRING TLS authentication type (default SRP) All --proxy-foo options are independent from their --foo counterparts, except --proxy-crlfile which defaults to --crlfile and --proxy-capath which defaults to --capath. Curl now also supports %{proxy_ssl_verify_result} --write-out variable, similar to the existing %{ssl_verify_result} variable. Supported backends: OpenSSL, GnuTLS, and NSS. * A SOCKS proxy + HTTP/HTTPS proxy combination: If both --socks* and --proxy options are given, Curl first connects to the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy. TODO: Update documentation for the new APIs and --proxy-* options. Look for "Added in 7.XXX" marks.
2016-11-14curl: add --fail-earlyDaniel Stenberg
Exit with an error on the first transfer error instead of continuing to do the rest of the URLs. Discussion: https://curl.haxx.se/mail/archive-2016-11/0038.html
2016-11-11curl: Add --retry-connrefusedDaniel Hwang
to consider ECONNREFUSED as a transient error. Closes #1064
2016-11-07curl: introduce the --tlsv1.3 option to force TLS 1.3Kamil Dudka
Fully implemented with the NSS backend only for now. Reviewed-by: Ray Satiro
2016-10-31strcase: make the tool use curl_str[n]equal insteadDaniel Stenberg
As they are after all part of the public API. Saves space and reduces complexity. Remove the strcase defines from the curlx_ family. Suggested-by: Dan Fandrich Idea: https://curl.haxx.se/mail/lib-2016-10/0136.html
2016-10-31strcasecompare: all case insensitive string compares ignore locale nowDaniel Stenberg
We had some confusions on when each function was used. We should not act differently on different locales anyway.
2016-10-31strcasecompare: is the new name for strequal()Daniel Stenberg
... to make it less likely that we forget that the function actually does case insentive compares. Also replaced several invokes of the function with a plain strcmp when case sensitivity is not an issue (like comparing with "-").
2016-08-17curl: allow "pkcs11:" prefix for client certificatesDavid Woodhouse
RFC7512 provides a standard method to reference certificates in PKCS#11 tokens, by means of a URI starting 'pkcs11:'. We're working on fixing various applications so that whenever they would have been able to use certificates from a file, users can simply insert a PKCS#11 URI instead and expect it to work. This expectation is now a part of the Fedora packaging guidelines, for example. This doesn't work with cURL because of the way that the colon is used to separate the certificate argument from the passphrase. So instead of curl -E 'pkcs11:manufacturer=piv_II;id=%01' … I instead need to invoke cURL with the colon escaped, like this: curl -E 'pkcs11\:manufacturer=piv_II;id=%01' … This is suboptimal because we want *consistency* — the URI should be usable in place of a filename anywhere, without having strange differences for different applications. This patch therefore disables the processing in parse_cert_parameter() when the string starts with 'pkcs11:'. It means you can't pass a passphrase with an unescaped PKCS#11 URI, but there's no need to do so because RFC7512 allows a PIN to be given as a 'pin-value' attribute in the URI itself. Also, if users are already using RFC7512 URIs with the colon escaped as in the above example — even providing a passphrase for cURL to handling instead of using a pin-value attribute, that will continue to work because their string will start 'pkcs11\:' and won't match the check. What *does* break with this patch is the extremely unlikely case that a user has a file which is in the local directory and literally named just "pkcs11", and they have a passphrase on it. If that ever happened, the user would need to refer to it as './pkcs11:<passphrase>' instead.
2016-04-29curl: remove "--socks" as "--socks5" turned 8Daniel Stenberg
In commit 2e42b0a2524 (Jan 2008) we made the option "--socks" deprecated and it has not been documented since. The more explicit socks options (like --socks4 or --socks5) should be used.
2016-04-29curl: remove --http-requestDaniel Stenberg
It was mentioned as deprecated already in commit ae1912cb0d4 from 1999. It has not been documented in this millennium.
2016-04-29curl: use --telnet-option as documentedDaniel Stenberg
The code said "telnet-options" but no documentation ever said so. It worked fine since the code is fine with a unique match of the first part.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 00:31:08 +0000